Document revision date: 19 July 1999
[Compaq] [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]
[OpenVMS documentation]

OpenVMS RTL Library (LIB$) Manual


Previous Contents Index


LIB$SCOPY_DXDX

The Copy Source String Passed by Descriptor to Destination routine copies a source string passed by descriptor to a destination string.

Format

LIB$SCOPY_DXDX source-string ,destination-string

Corresponding JSB Entry Point

LIB$SCOPY_DXDX6


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value


Arguments

source-string


OpenVMS usage: char_string
type: character string
access: read only
mechanism: by descriptor

Source string to be copied to the destination string by LIB$SCOPY_DXDX. The source-string argument contains the address of a descriptor pointing to this source string. The descriptor class can be unspecified, fixed-length, decimal string, array, noncontiguous array, varying, or dynamic.

destination-string


OpenVMS usage: char_string
type: character string
access: write only
mechanism: by descriptor

Destination string to which the source string is copied. The destination-string argument contains the address of a descriptor pointing to this destination string.

The following actions occur depending on the class of the destination string's descriptor:
Descriptor Class Action
S, Z, SD, A, NCA Copy the source string. If needed, space-fill or truncate on the right.
D If the area specified by the destination descriptor is large enough to contain the source string, copy the source string and set the new length in the destination descriptor. If the area specified is not large enough, return the previous space allocation (if any) and then dynamically allocate the amount of space needed. Copy the source string and set the new length and address in the destination descriptor.
VS Copy source string to destination string up to the limit of the descriptor MAXSTRLEN field with no padding. Readjust the current length (CURLEN) field to the actual number of bytes copied.


Description

LIB$SCOPY_DXDX returns all condition values as a status; truncation is a qualified success condition value (bit 0 set to 1).

In addition, an equivalent JSB entry point is available, with R0 containing the first argument and R1 containing the second.


Condition Values Returned

SS$_NORMAL Routine successfully completed. All characters in the input string were copied to the destination string.
LIB$_STRTRU Routine successfully completed. String truncated. The destination string could not contain all of the characters copied from the source string.
LIB$_FATERRLIB Fatal internal error. An internal consistency check has failed. This usually indicates an internal error in the Run-Time Library and should be reported to your Compaq support representative.
LIB$_INSVIRMEM Insufficient virtual memory. Your program has exceeded the image quota for virtual memory.
LIB$_INVSTRDES Invalid string descriptor. A string descriptor has an invalid value in its CLASS field.

LIB$SCOPY_R_DX

The Copy Source String Passed by Reference to Destination String routine copies a source string passed by reference to a destination string, passed by descriptor.

Format

LIB$SCOPY_R_DX word-integer-source-length ,source-string ,destination-string

Corresponding JSB Entry Point

LIB$SCOPY_R_DX6


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value


Arguments

word-integer-source-length


OpenVMS usage: word_unsigned
type: word (unsigned)
access: read only
mechanism: by reference

Length of the source string in bytes. The word-integer-source-length argument is the address of an unsigned word that contains the length of the source string.

source-string


OpenVMS usage: char_string
type: character string
access: read only
mechanism: by reference

Source string to be copied to the destination string by LIB$SCOPY_R_DX. The source-string argument is the address of this source string.

destination-string


OpenVMS usage: char_string
type: character string
access: write only
mechanism: by descriptor

Destination string to which the source string is copied. The destination-string argument contains the address of a descriptor pointing to this destination string.

Description

LIB$SCOPY_R_DX copies a source string, passed by reference, to a destination string, passed by descriptor. It returns the status as a condition value. Truncation is a qualified success; LIB$SCOPY_R_DX sets bit 0 of the condition value to 1.

The actions taken by LIB$SCOPY_R_DX depend on the descriptor class of the destination string. The following table describes these actions for each descriptor class:
Descriptor Class Action
S, Z, SD, A, NCA Copy the source string. If needed, space fill or truncate on the right.
D If the area specified by the destination descriptor is large enough to contain the source string, copy the source string and set the new length in the destination descriptor.
  If the area specified is not large enough, return the previous space allocation, if any, and then dynamically allocate the amount of space needed. Copy the source string and set the new length and address in the destination descriptor.
VS Copy source string to destination string up to the limit of the decsriptor's MAXSTRLEN field with no padding. Readjust the string's current length (CURLEN) field to the actual number of bytes copied.

An equivalent JSB entry is available, with R0 being the first argument, R1 the second, and R2 the third. The length argument is passed in bits 15:0 of R0.


Condition Values Returned

SS$_NORMAL Routine successfully completed. All characters in the input string were copied to the destination string.
LIB$_STRTRU Routine successfully completed. String truncated. The destination string could not contain all of the characters copied from the source string.
LIB$_FATERRLIB Fatal internal error. An internal consistency check has failed. This usually indicates an internal error in the Run-Time Library and should be reported to your Compaq support representative.
LIB$_INSVIRMEM Insufficient virtual memory. Your program has exceeded the image quota for virtual memory.
LIB$_INVSTRDES Invalid string descriptor. A string descriptor has an invalid value in its CLASS field.

LIB$SCOPY_R_DX_64 (Alpha Only)

The Copy Source String Passed by Reference to Destination String routine copies a source string passed by reference to a destination string, passed by descriptor.

Format

LIB$SCOPY_R_DX_64 quad-integer-source-length ,source-string ,destination-string


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value


Arguments

quad-integer-source-length


OpenVMS usage: quadword_unsigned
type: quadword (unsigned)
access: read only
mechanism: by reference

Length of the source string in bytes. The quad-integer-source-length argument is the address of an unsigned quadword that contains the length of the source string.

source-string


OpenVMS usage: char_string
type: character string
access: read only
mechanism: by reference

Source string to be copied to the destination string by LIB$SCOPY_R_DX_64. The source-string argument is the address of this source string.

destination-string


OpenVMS usage: char_string
type: character string
access: write only
mechanism: by descriptor

Destination string to which the source string is copied. The destination-string argument contains the address of a descriptor pointing to this destination string.

Description

LIB$SCOPY_R_DX_64 copies a source string, passed by reference, to a destination string, passed by descriptor. It returns the status as a condition value. Truncation is a qualified success; LIB$SCOPY_R_DX_64 sets bit 0 of the condition value to 1.

The actions taken by LIB$SCOPY_R_DX_64 depend on the descriptor class of the destination string. The following table describes these actions for each descriptor class:
Descriptor Class Action
S, Z, SD, A, NCA Copy the source string. If needed, space fill or truncate on the right.
D If the area specified by the destination descriptor is large enough to contain the source string, copy the source string and set the new length in the destination descriptor.
  If the area specified is not large enough, return the previous space allocation, if any, and then dynamically allocate the amount of space needed. Copy the source string and set the new length and address in the destination descriptor.
VS Copy source string to destination string up to the limit of the descriptor's MAXSTRLEN field with no padding. Readjust the string's current length (CURLEN) field to the actual number of bytes copied.


Condition Values Returned

SS$_NORMAL Routine successfully completed. All characters in the input string were copied to the destination string.
LIB$_STRTRU Routine successfully completed. String truncated. The destination string could not contain all of the characters copied from the source string.
LIB$_FATERRLIB Fatal internal error. An internal consistency check has failed. This usually indicates an internal error in the Run-Time Library and should be reported to your Compaq support representative.
LIB$_INSVIRMEM Insufficient virtual memory. Your program has exceeded the image quota for virtual memory.
LIB$_INVSTRDES Invalid string descriptor. A string descriptor has an invalid value in its CLASS field.

LIB$SET_LOGICAL

The Set Logical Name routine requests the calling process's command language interpreter (CLI) to define or redefine a supervisor-mode process logical name. It provides the same function as the DCL command DEFINE.

Format

LIB$SET_LOGICAL logical-name [,value-string] [,table] [,attributes] [,item-list]

Either the item-list or value-string argument must be specified. If both item-list and value-string are specified, the value-string argument is ignored.


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value


Arguments

logical-name


OpenVMS usage: logical_name
type: character string
access: read only
mechanism: by descriptor

Logical name to be defined or redefined. The logical-name argument contains the address of a descriptor pointing to this logical name string. The maximum length of a logical name is 255 characters. Note that logical names are case sensitive.

value-string


OpenVMS usage: char_string
type: character string
access: read only
mechanism: by descriptor

Value to be given to the logical name. The value-string argument contains the address of a descriptor pointing to this value string. The maximum length of a logical name value is 255 characters.

If omitted, an item list must be present to specify the values of the logical name.

table


OpenVMS usage: char_string
type: character string
access: read only
mechanism: by descriptor

Name of the table in which to create the logical name. The table argument contains the address of a descriptor pointing to the logical name table. If no table is specified, LNM$PROCESS is used as the default.

attributes


OpenVMS usage: mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference

Logical name or translation attributes. The attributes argument is the address of a longword bit mask that contains the logical name or translation attributes.

LNM$M_CONFINE and LNM$M_NO_ALIAS are currently available logical name attributes. See the description of the $CRELNM system service in the OpenVMS System Services Reference Manual for definitions of LNM$M_CONFINE and LNM$M_NO_ALIAS. If omitted, no special logical name attribute is established.

If no item-list is specified, the translation attributes LNM$M_CONCEALED and LNM$M_TERMINAL may be specified. See the description of the ASSIGN command in the OpenVMS DCL Dictionary for definitions of these attributes. If an item-list is specified, it will contain the translation attributes for each equivalence string in the attribute.

item-list


OpenVMS usage: item_list_3
type: unspecified
access: read only
mechanism: by reference, array reference

Item list describing the equivalence names for this logical name. The item-list argument contains the address of an array that contains this item list. If item-list is not specified, the logical name will have only one value, as specified in the value-string argument. Item codes for use with this item list are included in libraries supplied by Compaq in module $LNMDEF.

Either value-string or item-list must be specified. If neither is specified, the LIB$_INVARG error is produced. If both value-string and item-list are specified, the value-string argument is ignored.

If item-list is specified, only logical name attributes are permitted. Translation attributes appear in the item list.

The item-list argument is needed only when you want to create multiple equivalence strings for a single logical name.


Description

If the optional table argument is defined, the logical name will be placed in the table specified by the table argument; otherwise, the logical name is placed in the LNM$PROCESS table.

Unlike the system services $CRELOG and $CRELNM, LIB$SET_LOGICAL does not require the caller to be executing in supervisor mode to define a supervisor-mode logical name. Supervisor-mode logical names are not deleted when an image exits. A program can obtain the current value of any logical name by calling the system service $TRNLNM. For more information on logical names, see the OpenVMS System Services Reference Manual.

This routine is supported for use with the DCL and MCR CLIs. If an image is run directly as a subprocess or as a detached process, there is no CLI present to perform this function. In that case, the error status LIB$_NOCLI is returned.

This routine does not support the DCL DEFINE and DEASSIGN commands' special side-effect of opening and closing a process-permanent file if the logical name SYS$OUTPUT is specified.

See the OpenVMS DCL Dictionary for a description of the DEFINE command.


Condition Values Returned

SS$_NORMAL Routine successfully completed.
SS$_ACCVIO Access violation. The logical name or its value could not be read.
SS$_BADPARAM Bad argument.
SS$_BUFFEROVF Routine successfully completed; however, a buffer overflow occurred.
SS$_INSFMEM Insufficient dynamic memory.
SS$_IVLOGNAM Invalid logical name. The logical name or its value contained more than 255 characters.
SS$_IVLOGTAB Invalid logical name table.
SS$_NOPRIV No privileges for attempted operation.
SS$_SUPERSEDE Routine successfully completed; the previous definition of the logical name was replaced.
SS$_TOOMANYLNAM Logical name translation exceeded allowed depth.
LIB$_INVARG Neither the value-string nor the item-list argument was specified.
LIB$_INVSTRDES Invalid string descriptor.
LIB$_NOCLI No CLI present to perform function. The calling process did not have a CLI to perform the function or the CLI did not support the request type. Note that an image run as a subprocess or detached process does not have a CLI.
LIB$_UNECLIERR Unexpected CLI error. The CLI returned an error status which was not recognized. This error may be caused by use of a nonstandard CLI. If this error occurs while using the DCL command language interpreter, please report the problem to your Compaq support representative.

Example


    
 
!+ 
! Initialize value for logical name MY_LOG 
!- 
SYMBOL$ = 'MY_LOG' 
SETVAL$ = 'OFF' 
CALL LIB$SET_LOGICAL (SYMBOL$, SETVAL$) 
END 
 
      

The BASIC program above sets the logical MY_LOG to OFF. This value can be displayed after the program is run with SHOW LOGICAL as follows:


$ SHOW LOGICAL MY_LOG
"MY_LOG" = "OFF" (LNM$PROCESS_TABLE)


Previous Next Contents Index

  [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]  
  privacy and legal statement  
5932PRO_036.HTML