| United States |
|
|
|
| Previous | Contents | Index |
#include <errno.h>
#include <stdio.h>
#include <locale.h>
/* This program calls setlocale() three times. The second call */
/* is for a nonexistent locale. The third call is for an */
/* existing file that is not a locale file. */
main()
{
char *ret_str;
errno = 0;
printf("setlocale (LC_ALL, \"POSIX\")");
ret_str = (char *) setlocale(LC_ALL, "POSIX");
if (ret_str == NULL)
perror("setlocale error");
else
printf(" call was succesfull\n");
errno = 0;
printf("\n\nsetlocale (LC_ALL, \"junk.junk_codeset\")");
ret_str = (char *) setlocale(LC_ALL, "junk.junk_codeset");
if (ret_str == NULL)
perror(" returned error");
else
printf(" call was succesfull\n");
errno = 0;
printf("\n\nsetlocale (LC_ALL, \"sys$login:login.com\")");
ret_str = (char *) setlocale(LC_ALL, "sys$login:login.com");
if (ret_str == NULL)
perror(" returned error");
else
printf(" call was succesfull\n");
}
|
Running the example program produces the following result:
setlocale (LC_ALL, "POSIX") call was succesfull setlocale (LC_ALL, "junk.junk_codeset") returned error: no such file or directory setlocale (LC_ALL, "sys$login:login.com") returned error: non-translatable vms error code: 0x35C07C %c-f-localebad, not a locale file |
Restarts, and changes random number generators.
char *setstate (char *state;)
state
Points to the array of state information.
This function handles restarting and changing random number generators.Once you initialize a state, the setstate function allows rapid switching between state arrays. The array defined by state is used for further random number generation until the initstate function is called or the setstate function is called again. The setstate function returns a pointer to the previous state array.
After initialization, you can restart a state array at a different point in one of two ways:
- Use the initstate function, with the desired seed, state array, and size of the array.
- Use the setstate function, with the desired state, followed by the srandom function with the desired seed . The advantage of using both functions is that you do not have to save the state array size once you initialize it.
See also initstate , and srand48 in this section.
x A pointer to the previous state array information. 0 Indicates an error. The state information is damaged. Further specified in the following errno value:
- EINVAL---The state argument is invalid.
Implemented for program portability and serves no function. It returns 0 (to indicate success).
#include <unistd.h>int setuid (__uid_t member_number); (_DECC_V4_SOURCE)
uid_t setuid (uid_t member_number); (NOT _DECC_V4_SOURCE)
member_number
The member number.
Associates a buffer with an input or output file and potentially modifies the buffering behavior.
#include <stdio.h>int setvbuf (FILE *file_ptr, char *buffer, int type, size_t size);
file_ptr
A pointer to a file.buffer
A pointer to a character array, or a NULL pointer.type
The buffering type. Use one of the following values defined in <stdio.h> : _IONBF, _IOFBF, _IOLBF.size
The number of bytes to be used in buffer by the Compaq C RTL for buffering this file. A minimum buffer size of 8192 is required.
You can use this function after the file is opened but before any I/O operations are performed.The ANSI C standard defines the following types of file buffering. In unbuffered I/O, each I/O operation is performed immediately. Output characters or lines are written to the output device before control is returned to the program. Input characters or lines are sent directly to the program without read-ahead by the Compaq C RTL.
In line-buffered I/O, characters are buffered in an area of memory until a new-line character is seen, at which point the appropriate RMS routine is called to transmit the entire buffer. Line buffering is more efficient than unbuffered I/O since it reduces the system overhead, but it delays the availability of the data to the user or disk on output.
In fully buffered I/O, characters are buffered in an area of memory until the buffer is full, regardless of the presence of break characters. Full buffering is more efficient than line buffering or unbuffered I/O, but it delays the availability of output data even longer than line buffering.
Use the values _IONBF, _IOLBF, and _IOFBF defined in <stdio.h> for the type argument to specify unbuffered, line-buffered, and fully buffered I/O, respectively.
If _IONBF is specified for type, I/O will be unbuffered and the buffer and size arguments are ignored.
If _IOLBF or _IOFBF is specified for type, the Compaq C RTL will use line-buffered I/O if file_ptr specifies a terminal device; otherwise, it will use fully buffered I/O.
The Compaq C RTL automatically allocates a buffer to use for each I/O stream. So there are several buffer allocation possibilities:
- If buffer is not a NULL pointer and size is not smaller than the automatically allocated buffer, then setvbuf uses buffer as the file buffer.
- If buffer is a NULL pointer or size is smaller than the automatically allocated buffer, the automatically allocated buffer is used as the buffer area.
- If buffer is a NULL pointer and size is larger than the automatically allocated buffer, then setvbuf allocates a new buffer equal to the specified size and uses that as the file buffer.
User programs must not depend on the contents of buffer once I/O has been performed on the stream. The Compaq C RTL might or might not use buffer for any given I/O operation.
Generally, it is unnecessary to use setvbuf or setbuf to control the buffer size used by the Compaq C RTL. The automatically allocated buffer sizes are chosen for efficiency based on the kind of I/O operations performed and the device characteristics (such as terminal, disk, or socket).
The setvbuf and setbuf functions are useful to introduce buffering for improved performance when writing a large amount of text to the stdout stream. This stream is unbuffered by default when bound to a terminal device (the normal case), and therefore incurs a large number of OpenVMS buffered I/O operations unless Compaq C RTL buffering is introduced by a call to setvbuf or setbuf .
The setvbuf function is used only to control the buffering used by the Compaq C RTL, not the buffering used by the underlying RMS I/O operations. You can modify RMS default buffering behavior by specifying various values for the ctx, fop, rat, gbc, mbc, mbf, rfm, and rop RMS keywords when the file is opened by the creat , freopen or open functions.
0 Indicates success. nonzero value Indicates that an invalid input value was specifed for type or file_ptr, or because file_ptr is being used by another thread (see Section 1.7.1).
Specifies the action to take upon delivery of a signal.
#include <signal.h>int sigaction (int sig, const struct sigaction *action, struct sigaction *o_action);
sig
The signal for which the action is to be taken.action
A pointer to a sigaction structure that describes the action to take when you receive the signal specified by the sig argument.o_action
A pointer to a sigaction structure. When the sigaction function returns from a call, the action previously attached to the specified signal is stored in this structure.
When a process requests the sigaction function, the process can both examine and specify what action to perform when the specified signal is delivered. The arguments determine the behavior of the sigaction function as follows:
- Specifying the sig argument identifies the affected signal. Use any one of the signal values defined in the <signal.h> header file, except SIGKILL.
If sig is SIGCHLD and the SA_NOCLDSTOP flag is not set in sa_flags, then a SIGCHLD signal is generated for the calling process whenever any of its child processes stop. If sig is SIGCHLD and the SA_NOCLDSTOP flag is set in sa_flags, then SIGCHLD signal is not generated in this way.- Specifying the action argument, if not null, points to a sigaction structure that defines what action to perform when the signal is received. If the action argument is null, signal handling remains unchanged, so you can use the call to inquire about the current handling of the signal.
- Specifying the o_action argument, if not null, points to a sigaction structure that contains the action previously attached to the specified signal.
The sigaction structure consists of the following members:
void (*sa_handler)(int); sigset_t sa_mask; int sa_flags;The sigaction structure members are defined as follows:
sa_handler This member can contain the following values:
- SIG_DFL -- Specifies the default action taken when the signal is delivered.
- SIG_IGN -- Specifies that the signal has no effect on the receiving process.
- Function pointer -- Requests to catch the signal. The signal causes the function call.
sa_mask This member can request that individual signals, in addition to those in the process signal mask, are blocked from delivery while the signal handler function specified by the sa_handler member is executing. sa_flags This member can set the flags to enable further control over the actions taken when a signal is delivered. The sa_flags member of the sigaction structure has the following values:
SA_ONSTACK Setting this bit causes the system to run the signal catching function on the signal stack specified by the sigstack function. If this bit is not set, the function runs on the stack of the process where the signal is delivered. SA_RESETHAND Setting this bit resets the signal to SIG_DFL. Be aware that you cannot automatically reset SIGILL and SIGTRAP. SA_NODEFER Setting this bit does not automatically block the signal as it is caught. SA_NOCLDSTOP If this bit is set and the sig argument is equal to SIGCHLD and a child process of the calling process stops, then a SIGCHLD signal is sent to the calling process only if SA_NOCLDSTOP is not set for SIGCHLD. When a signal is caught by a signal-catching function installed by sigaction , a new signal mask is calculated and installed for the duration of the signal-catching function (or until a call to either sigprocmask or sigsuspend is made. This mask is formed by taking the union of the current signal mask and the value of the sa_mask for the signal being delivered unless SA_NODEFER or SA_RESETHAND is set, and then including the signal being delivered. If and when the user's signal handler returns normally, the original signal mask is restored.
Once an action is installed for a specific signal, it remains installed until another action is explicitly requested (by another call to sigaction ), until the SA_RESETHAND flag causes resetting of the handler, or until one of the exec functions is called.
If the previous action for a specified signal had been established by signal , the values of the fields returned in the structure pointed to by the o_action argument of sigaction are unspecified, and in particular o_action->sa_handler is not necessarily the same value passed to signal . However, if a pointer to the same structure or a copy thereof is passed to a subsequent call to sigaction by means of the action argument of sigaction ), the signal is handled as if the original call to signal were repeated.
If sigaction fails, no new signal handler is installed.
It is unspecified whether an attempt to set the action for a signal that cannot be caught or ignored to SIG_DFL is ignored or causes an error to be returned with errno set to EINVAL.
See Section 4.2 for more information on signal handling.
Note
The sigvec and signal functions are provided for compatibility to old UNIX systems; their function is a subset of that available with the sigaction function.See also sigstack , sigvec , signal , wait , read , and write , in this section.
0 Indicates success. --1 Indicates an error; A new signal handler is not installed. errno is set to one of the following values:
- EFAULT -- The action or o_action argument points to a location outside of the allocated address space of the process.
- EINVAL -- The sig argument is not a valid signal number. Or an attempt was made to ignore or supply a handler for the SIGKILL, SIGSTOP, and SIGCONT signals.
Adds the specified individual signal.
#include <signal.h>int sigaddset (sigset_t *set, int sig_number);
set
The signal set.sig_number
The individual signal.
This function manipulates sets of signals. This function operates on data objects that you can address by the application, not on any set of signals known to the system. For example, this function does not operate on the set blocked from delivery to a process or the set pending for a process.The sigaddset function adds the individual signal specified by sig_number from the signal set specified by set.
The following example shows how to generate and use a signal mask that blocks only the SIGINT signal from delivery.
#include <signal.h> int return_value; sigset_t newset; . . . sigemptyset(&newset); sigaddset(&newset, SIGINT); return_value = sigprocmask (SIG_SETMASK, &newset, NULL);
0 Indicates success. --1 Indicates an error; errno is set to one of the following values:
- EINVAL -- The value of sig_number is not a valid signal number.
Adds the signals in mask to the current set of signals being blocked from delivery.
#include <signal.h>int sigblock (int mask);
mask
The signals to be blocked.
Signal i is blocked if the i -- 1 bit in mask is a 1. For example, to add the protection-violation signal to the set of blocked signals, use the following line:
sigblock(1 << (SIGBUS - 1));You can express signals in mnemonics (such as SIGBUS for a protection violation) or numbers as defined in the <signal.h> header file, and you can express combinations of signals by using the bitwise OR operator (|).
x Indicates the previous set of masked signals.
Deletes a specified individual signal.
#include <signal.h>int sigdelset (sigset_t *set, int sig_number;)
set
The signal set.sig_number
The individual signal.
The sigdelset function deletes the individual signal specified by sig_number from the signal set specified by set.
This function operates on data objects that you can address by the application, not on any set of signals known to the system. For example, this function does not operate on the set blocked from delivery to a process or the set pending for a process.
0 Indicates success. --1 Indicates an error; errno is set to one of the following values:
- EINVAL -- The value of sig_number is not a valid signal number.
Initializes the signal set to exclude all signals.
#include <signal.h>int sigemptyset (sigset_t *set);
set
The signal set.
The sigemptyset function initializes the signal set pointed to by set such that you exclude all signals. A call to sigemptyset or sigfillset must be made at least once for each object of type sigset_t prior to any other use of that object.This function operates on data objects that you can address by the application, not on any set of signals known to the system. For example, this function does not operate on the set blocked from delivery to a process or the set pending for a process.
See also sigfillset in this section.
The following example shows how to generate and use a signal mask that blocks only the SIGINT signal from delivery.
#include <signal.h> int return_value; sigset_t newset; . . . sigemptyset(&newset); sigaddset(&newset, SIGINT); return_value = sigprocmask (SIG_SETMASK, &newset, NULL);
0 Indicates success. --1 Indicates an error; the global errno is set to indicate the error.
Initializes the signal set to include all signals.
#include <signal.h>int sigfillset (sigset_t *set);
set
The signal set.
The sigfillset function initializes the signal set pointed to by set such that you include all signals. A call to sigemptyset or sigfillset must be made at least once for each object of type sigset_t prior to any other use of that object.This function operates on data objects that you can address by the application, not on any set of signals known to the system. For example, this function does not operate on the set blocked from delivery to a process or the set pending for a process.
See also sigemptyset in this section.
0 Indicates success. --1 Indicates an error; errno is set to one of the following values:
- EINVAL -- The value of the sig_number argument is not a valid signal number.
| Previous | Next | Contents | Index |
|
