| Previous | Contents | Index |
DUP (duplicate)
| VT100: EXT + * | VT200: EXT + F12 |
| DEFINE_KEY Function: DUP | |
Lets you enter a value in the same field in several forms without needing to repeat the entry for each form.
After entering the data in the field on the first form, use the DUP function when at the same field on succeeding forms. The application program makes the necessary translation, filling in these fields with the same value. For details about the use of this key, refer to the user's guide of the particular application program.
Displays an asterisk (*).
DV CNCL (device cancel)
| VT100: EXT + U | VT200: EXT + Remove |
| DEFINE_KEY Function: DVCNCL | |
Cancels the RECORD function. Use the DV CNCL function if you begin using the RECORD function and then decide you want to stop. If you want to delete a sequence that has already been recorded on a PF key, use the RECORD function, press the PF key, and then use the DV CNCL function.
ENTER
| VT100: Line Feed + Enter | VT200: Do + Enter |
| DEFINE_KEY Function: ENTER | |
Sends your input to the remote application program. While this communication is active, the keyboard locks and indicator Inhib appears on the status line. Usually the application program releases the keyboard when it has finished processing your input.
ER EOF (erase to the end of the field)
| VT100: EXT + KP, | VT200: F18 |
| DEFINE_KEY Function: ERASE_EOF | |
Erases the contents of the current field, from the location of the cursor to the end of the field. The cursor remains in the same location.
ER INP (erase input)
| VT100: EXT + KP- | VT200: EXT + F18 |
| DEFINE_KEY Function: ERASE_INPUT | |
On a formatted screen, clears all the data in the unprotected fields on your screen and moves the cursor to the first position in the first unprotected field on the screen.
On an unformatted screen, clears all the data and moves the cursor to the first position on the screen.
You can also use the ER INP function to remove all previously recorded key sequences by using the RECORD function and then the ER INP function.
EXIT
| VT100: Ctrl/Z or F10 | VT200: Ctrl/Z or F10 |
| DEFINE_KEY Function: EXIT | |
Terminates the remote TELNET/TN3270 session. Aborts any exchange of data in progress between the local and remote hosts. Note that terminating a session with the IBM host in this way may result in improper termination of the session. For the appropriate logoff command string, see the user's guide for the IBM application with which you are communicating.
EXT (extended function)
| VT100: KP. | VT200: KP. |
| DEFINE_KEY Function: EXTEND | |
Used in conjunction with another key, allows access to an extended function for that key. First invoke the EXT function, and then press the second key. If you invoke EXT accidentally, invoke the RESET function to cancel the EXT function.
If the status display is enabled when you invoke the EXT function, the word Extend appears on the status line.
FM (field mark)
| VT100: EXT + ; | VT200: EXT + F13 |
| DEFINE_KEY Function: FM | |
Specifies the end of a field on an unformatted screen or the end of part of an unprotected field on a formatted screen. Refer to the user's guide of the remote application program for specific use of this key.
Displays a semicolon ( ; ).
HELP
| VT100: EXT + H | VT200: Help |
| DEFINE_KEY Function: HELP | |
Displays online help and an illustration of the TN3270 keyboard.
HOME
| VT100: EXT + B | VT200: F13 |
| DEFINE_KEY Function: HOME | |
Repositions the cursor to the first position in the first unprotected field on the screen (that is, to the beginning of the input area on the screen).
Horizontal Control (Right arrow and Left arrow)
| VT100: Right arrow or Left arrow | VT200: Right arrow or Left arrow |
| DEFINE_KEY Function: RIGHT, RIGHT_NOWRAP, LEFT, or LEFT_NOWRAP | |
Moves the cursor horizontally across your screen without changing data you have already entered. Note the following about cursor behavior:
INSERT
| VT100: EXT + PF4 | VT200: F14 |
| DEFINE_KEY Function: INSERT_MODE | |
Enables insert mode. Use insert mode to edit what you entered. If the status display is enabled, the word Insert appears.
In insert mode, when you enter a character into an unprotected field, it is displayed to the left of the cursor, moving the following display elements one position to the right:
You can insert characters into following:
If you attempt to insert characters after the field is full, the keyboard locks, the terminal bell rings, and the word Inhib appears on the status line. If the keyboard locks when you try to insert characters into a field that looks empty, the field might have trailing spaces. To delete these spaces, use the ER EOF function.
To return your screen to the normal mode of entry, use one of the following keyboard functions:
Logical NOT (| --)
| VT100: EXT + N | VT200: EXT + N |
| DEFINE_KEY Function: (None) | |
Represents the remote host's symbol for a logical NOT; displayed as a circumflex ( ^ ) on Compaq terminals.
Logical OR (|)
| VT100: EXT + O | VT200: EXT + O |
| DEFINE_KEY Function: (None) | |
Represents the remote host's symbol for a logical OR; displayed as a solid vertical line from the terminal's graphics set. Press Ext + O if the vertical bar is not available on your keyboard.
New Line (hooked left arrow)
| VT100: Return | VT200: Return |
| DEFINE_KEY Function: NEWLINE | |
Moves the cursor to the first unprotected position on the next line of your screen. If no unprotected fields are on the screen when you invoke the new line function, the cursor moves to the first location on the screen. If the screen has no fields, this key has the same function as the Return key on Compaq keyboards.
NUM OVR (numeric lock override)
| VT100: EXT + J | VT200: Remove |
| DEFINE_KEY Function: NUMOVR | |
Lets you enter nonnumeric characters into numeric fields. Once you enable this function, use NUM OVR again to disable it. If you do not disable the numeric lock override, it remains enabled even after you exit from TN3270. The letter O appears on the status line to indicate that the numeric lock override is in effect.
PA1, PA2, PA3
| VT100: PF4 , KP- , KP, | VT200: PF4 , KP- , KP, |
| DEFINE_KEY Function: PA1--PA3 | |
These program access keys are defined by the program you are using. These keys request attention from the remote application program without sending any data. You should refer to the user's guide of your application program to learn how the PA keys are defined.
PF1 through PF24
| VT100: see table | VT200: see table |
| DEFINE_KEY Function: PF1--PF24 | |
These program function keys are defined by the remote application program you are using. They request attention from the application program and send the data entered to the host. The PF keys are coded by the application program to perform functions relating to the application. A particular PF key may be coded differently from one application to another. The user's guide of the remote application program usually defines the specific PF key assignments for that application program.
| To Implement This Function |
Press This Key or Key Combination |
|---|---|
| PF1 | PF1 |
| PF2 | PF2 |
| PF3 | PF3 |
| PF4 | KP7 |
| PF5 | KP8 |
| PF6 | KP9 |
| PF7 | KP4 |
| PF8 | KP5 |
| PF9 | KP6 |
| PF10 | KP1 |
| PF11 | KP2 |
| PF12 | KP3 |
| PF13 | EXT + PF1 |
| PF14 | EXT + PF2 |
| PF15 | EXT + PF3 |
| PF16 | EXT + KP7 |
| PF17 | EXT + KP8 |
| PF18 | EXT + KP9 |
| PF19 | EXT + KP4 |
| PF20 | EXT + KP5 |
| PF21 | EXT + KP6 |
| PF22 | EXT + KP1 |
| PF23 | EXT + KP2 |
| PF24 | EXT + KP3 |
PLAY
| VT100: EXT + M | VT200: Insert Here |
| DEFINE_KEY Function: PLAY | |
Recalls keystroke sequences stored on PF keys using the RECORD function. Invoke the PLAY function and then press the PF key on which the desired key sequence is stored. The PLAY function executes all commands included in the keystroke sequence.
If the HELP utility is invoked in your key sequence, the PLAY function continues until you exit from the HELP utility. Also, if you use functions that require you to respond to prompts (such as ATTACH, DEF KEY, SET FIL, or SPAWN), the information you enter at the prompt is not recorded. When you recall the sequence, the system prompts you for this information again.
The letter P appears on the status line if the status display is enabled.
| VT100: EXT + P | VT200: F11 |
| DEFINE_KEY Function: PRINT | |
Records the contents of your screen in a file or at a printer. (This is a local print feature.) If the status display is enabled when you use the PRINT function, the word Print appears on the status line. Your screen refreshes when the printing process completes.
The first use of PRINT in a given run of TN3270 creates a new version of the output file. Successive uses of PRINT in the same program cause the screen contents to append to the existing file. If the output is directed to a printer, each use of PRINT creates a separate entry in the printer queue. If the printer is a spooled printer, the output is released for printing immediately.
To specify where to direct the output file, use the command qualifier /PRINTER=file. The SET FIL function allows you to change the name of the output file each time you invoke the PRINT function.
RECORD
| VT100: EXT + L | VT200: EXT + Insert Here |
| DEFINE_KEY Function: RECORD | |
Saves a keystroke sequence on a specific PF key. Invoke the RECORD function with the appropriate key sequence, press the PF key as prompted, enter the keystroke sequence, and then invoke the RECORD function again. You can save a maximum number of 127 keystrokes on each PF key. If the status display is enabled when you use the RECORD function, the letter R appears on the status line.
To recall the keystroke sequence, use the PLAY function. To cancel the RECORD function, use the DV CNCL function. To erase all previously recorded key sequences, use the ER INP function.
REFR (refresh)
| VT100: Ctrl/W | VT200: Ctrl/W or F20 |
| DEFINE_KEY Function: REFRESH | |
Removes TN3270 error messages, operating system messages, or other messages that appear on your screen. This key function deletes extraneous characters from your screen and redisplays the fields and data that were on the screen before the interruption.
This function does not transmit or receive data from the remote host. It is a local OpenVMS function.
RESET
| VT100: KP0 | VT200: KP0 |
| DEFINE_KEY Function: RESET | |
Returns the keyboard to normal input mode from insert mode. Also, the RESET function returns the keyboard to your control after it locks when you try to enter data in to a protected or a full field, or when you try to enter the wrong type of data in a field.
Invoking RESET turns off the Inhib indicator. The cursor remains where it is and the screen remains unchanged.
SELECT
| VT100: EXT + K | VT200: Select |
| DEFINE_KEY Function: SELECT | |
Lets you choose items from a menu, table, or list and then notify the program of your selection. Use the arrow keys to position the cursor on the field designator character, then use the SELECT function. For more information on using SELECT, refer to the user's guide of the remote application.
SET FIL (set print file)
| VT100: EXT + F or Ctrl/F | VT200: EXT + F11 |
| DEFINE_KEY Function: SET_PRINTFILE | |
Lets you change the name of the file or device that receives output each time you invoke the PRINT function. After you invoke SET FIL, you are prompted for the name of a new output device, emulating the remote host's IDENT function.
Note that if you specify the same name that is already in use, subsequent PRINT operations direct output to a new version of the same file.
SHO MSG
| VT100: EXT + G | VT200: EXT + F14 |
| DEFINE_KEY Function: SHOW_MESSAGE | |
Displays the broadcast messages that have been posted on a separate screen. If the status line is enabled, the indicator Msg appears on the status line. If you do not read the messages before they fill up the screen, the messages begin to scroll up out of view and you can no longer read them. These broadcast messages are not saved after you either read them or exit TN3270.
SPAWN
| VT100: EXT + D | VT200: Find |
| DEFINE_KEY Function: SPAWN | |
Creates a subprocess under the current process. Use the LOGOUT command to terminate the subprocess. Because a tree of subprocesses can be established using the SPAWN function, you must be careful when terminating any process in the tree. When a process is terminated, all subprocesses below that point in the tree are terminated automatically.
When you create a subprocess, you can specify an optional command string. The command string is executed within the created subprocess, and the subprocess terminates upon completion of the command.
STATUS
| VT100: EXT + S | VT200: F17 |
| DEFINE_KEY Function: STATUS | |
Lets you enable and disable the display of status information.
When you enable STATUS, the last line on your screen is painted over with a reverse video strip. This line may conceal remote host system or application information. If this occurs, the word Hidden appears in the status line.
You can disable the status display by using the STATUS function again.
SYS REQ (system request)
| VT100: EXT + R | VT200: EXT + F19 |
| DEFINE_KEY Function: SYS_REQUEST | |
Lets you shift between the application program (the LU-LU session) and the control program (the SSCP-LU session). If the status display is enabled, the Appl or SSCP indicator appears on the status line to indicate the type of session. Appl appears when you are in an LU-LU session, and SSCP appears when you are in the SSCP-LU session.
The screen is refreshed when you use the SYS REQ function.
Tab (Right arrow |)
| VT100: Tab | VT200: Tab |
| DEFINE_KEY Function: TAB | |
Moves the cursor to the first character location of the next unprotected field on your screen. If the screen has no fields, the Right arrow function moves the cursor to the first location on the screen.
If the cursor is within the last unprotected field on the screen, the cursor moves to the first position of the first unprotected field on the screen.
Vertical Control (Up arrow and Down arrow)
| VT100: Up arrow or Down arrow | VT200: Up arrow or Down arrow |
| DEFINE_KEY Function: UP, UP_NOWRAP, DOWN, or DOWN_NOWRAP | |
Moves the cursor vertically on your screen without altering the data you have already entered. Note the following about the cursor behavior:
| Previous | Next | Contents | Index |