Document revision date: 19 July 1999
[Compaq] [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]
[OpenVMS documentation]

OpenVMS Cluster Systems


Previous Contents Index

P
Packet loss
    caused by network congestion #1
    caused by network congestion #2
    caused by too many HELLO datagrams
    NISCA retransmissions
Packets
    capturing data
    maximum size on Ethernet
    maximum size on FDDI
    transmission window size
PADRIVER port driver #1
PADRIVER port driver #2
    communications for CI
Page files (PAGEFILE.SYS)
    created by CLUSTER_CONFIG.COM procedure
    created by CLUSTER_CONFIG.COM procedure
Page size
    hardware
        AUTOGEN determination
PAKs (Product Authorization Keys)
PANUMPOLL system parameter
PAPOLLINTERVAL system parameter
Partner programs
    capturing retransmitted packets
PASANITY system parameter
Passwords
    VMS$PASSWORD_DICTIONARY.DATA file #1
    VMS$PASSWORD_DICTIONARY.DATA file #2
    VMS$PASSWORD_HISTORY.DATA file #1
    VMS$PASSWORD_HISTORY.DATA file #2
    VMS$PASSWORD_POLICY.EXE file #1
    VMS$PASSWORD_POLICY.EXE file #2
PASTDGBUF system parameter #1
PASTDGBUF system parameter #2
PASTIMOUT system parameter
Paths
    specifying preferred for MSCP-served disks
PBDRIVER port driver
PEDRIVER port driver #1
PEDRIVER port driver #2
    communications for LANs
    congestion control
    HELLO multicasts
    implementing the NISCA protocol
    NISCS_LOAD_PEA0 system parameter
    preferred channel
    retransmission
    SDA monitoring
PI protocol
    part of the SCA architecture
PIDRIVER port driver #1
PIDRIVER port driver #2
    communications for DSSI
PK*DRIVER port driver
PMDRIVER port driver
PNDRIVER port driver
    communications for CI
POLYCENTER Capacity Planner
POLYCENTER Console Manager (PCM)
Port
    software controllable selection
Port communications #1
Port communications #2
Port drivers #1
Port drivers #2
    device error-log entries
    error-log entries
Port failures
Port polling
PPC protocol
    part of NISCA transport protocol
PPD level
    part of PPD protocol
PPD protocol
    part of SCA architecture
Preferred channels
Print queues #1
Print queues #2
    assigning unique name to
    clusterwide generic
    setting up clusterwide
    starting
Processes
    quotas #1
    quotas #2
Programs
    analyze retransmission errors
    LAN analyzer partner
    LAN analyzer scribe
    LAN analyzer starter
Protocols
    Channel Control (CC)
    Datagram Exchange (DX)
    PEDRIVER implementation of NISCA
    Physical Interconnect (PI)
    Port-to-Port Communication (PPC)
    Port-to-Port Driver (PPD)
    System Application (SYSAP)
    System Communications Services (SCS)
    Transport (TR)
Proxy logins
    controlling
    records
Q
QDSKINTERVAL system parameter
QDSKVOTES system parameter #1
QDSKVOTES system parameter #2
QMAN$MASTER.DAT file #1
QMAN$MASTER.DAT file #2
QMAN$MASTER.DAT file #3
    authorization elements
Queue managers
    availability of
    clusterwide
Queues
    common command procedure
    controlling
    database files
        creating
        default location
    setting up in SYSTARTUP_COMMON.COM procedure
Quorum
    adding voting members
    algorithm
    calculating cluster votes
    changing expected votes
    DISK_QUORUM system parameter
    enabling a quorum disk watcher
    EXPECTED_VOTES system parameter #1
    EXPECTED_VOTES system parameter #2
    QUORUM.DAT file
    reasons for loss
    removing voting members
    restoring after unexpected computer failure
    system parameters
    VOTES system parameter
QUORUM.DAT file
Quorum disk
    adding
    adjusting EXPECTED_VOTES
    disabling #1
    disabling #2
    enabling
    mounting
    QDKSVOTES system parameter
    QUORUM.DAT file
    restricted from shadow sets
    watcher
        enabling
        mounting the quorum disk
        system parameters
Quotas
    process #1
    process #2
R
RAID (redundant arrays of independent disks)
    device naming problem
RBMS (Remote Bridge Management System)
    monitoring LAN traffic
RECNXINTERVAL system parameter
Request descriptor table entries
Resource sharing
    components that manage
    making DECnet databases available clusterwide
    printers
    processing
Retransmissions
    analyzing errors
    caused by HELLO datagram congestion
    caused by lost ACKs
    caused by lost messages
    problems
    under congestion conditions
REXMT flag
RIGHTSLIST.DAT files
    authorization elements
    merging
    security mechanism
RMS
    use of distributed lock manager
S
Satellite nodes
    adding
    altering local disk labels
    booting #1
    booting #2
    booting #3
    booting #4
        controlling #1
        controlling #2
        conversational bootstrap operations
        cross-architecture #1
        cross-architecture #2
        DECnet MOP downline load service
        LAN MOP downline load service
        LANCP as booting mechanism
        preparing for
        troubleshooting #1
        troubleshooting #2
    downline loading
    functions
    LAN hardware addresses
        modifying
        obtaining
    local disk used for paging and swapping
    maintaining network configuration data #1
    maintaining network configuration data #2
    rebooting
    removing
    restoring network configuration data
    system files created by CLUSTER_CONFIG.COM procedure
    updating network data in NETNODE_REMOTE.DAT
SATELLITE_PAGE.COM command procedure
SCA (System Communications Architecture)
    NISCA transport protocol #1
    NISCA transport protocol #2
    protocol levels #1
    protocol levels #2
Scribe programs
    capturing traffic data
SCS (System Communications Services)
    connections
    definition
    DX header for protocol
    for interprocessor communication
    part of the SCA architecture
    port polling
    system parameters
        SCSMAXDG
        SCSMAXMSG
        SCSRESPCNT
SCSBUFFCNT system parameter
SCSCONNCNT system parameter
SCSI (Small Computer Systems Interface)
    cluster-accessible disks
    clusterwide reboot requirements
    configurations
    device names
        reboot requirements
    disks #1
    disks #2
    support for compliant hardware
SCSLOA.EXE image
SCSNODE system parameter
SCSRESPCNT system parameter
SCSSYSTEMID system parameter
SDI (standard disk interface) #1
SDI (standard disk interface) #2
Search lists
Security management #1
Security management #2
    controlling conversational bootstrap operations
    membership integrity
    network
    security-relevant files
Sequence numbers
    for datagram flags
Servers
    actions during booting
    boot
    configuration memory and LAN adapters
    disk
    enabling circuit service for MOP
    MOP
    MOP and disk
    MSCP
    tape
    TMSCP #1
    TMSCP #2
    used for downline load
SET ALLOCATE command
SET AUDIT command
SET LOGINS command
SET PREFERRED_PATH command
SET TIME command
    setting time across a cluster
SET VOLUME/REBUILD command
Shadow sets
    accessed through MSCP server
    definition
    distributing
    maximum number
    See also Volume shadowing
    virtual unit
SHOW CLUSTER command
Show Cluster utility (SHOW CLUSTER) #1
Show Cluster utility (SHOW CLUSTER) #2
    CL_QUORUM command
    CL_VOTES command
    EXPECTED_VOTES command
SHOW DEVICE commands
SHUTDOWN command
    shutting down a node or subset of nodes
    shutting down the cluster
Shutting down a node
Shutting down the cluster #1
Shutting down the cluster #2
SLS (Storage Library System)
Standalone computers
    converting to cluster computer
Star couplers
START/QUEUE/MANAGER command
    /NEW_VERSION qualifier
    /ON qualifier #1
    /ON qualifier #2
Starter programs
    capturing retransmitted packets
Startup command procedures
    controlling satellites
    coordinating
    site-specific
    template files
STARTUP_P1 system parameter
    does not start all processes #1
    does not start all processes #2
    minimum startup
State transitions #1
State transitions #2
Status
    returned by SYS$LAVC_START_BUS subroutine
STI (standard tape interface)
StorageWorks RAID Array 210 Subsystem
    naming devices
StorageWorks RAID Array 230 Subsystem
    naming devices
Stripe sets
    shadowed
Swap files
    created by CLUSTER_CONFIG.COM procedure
Swap files (SWAPFILE.SYS)
    created by CLUSTER_CONFIG.COM procedure
SWAPFILE.SYS
SYLOGICALS.COM startup file
    cloning system disks
SYS$COMMON:[SYSMGR] directory
    template files
SYS$DEVICES.DAT text file
SYS$LAVC_DEFINE_NET_COMPONENT subroutine
SYS$LAVC_DEFINE_NET_PATH subroutine
SYS$LAVC_DISABLE_ANALYSIS subroutine
SYS$LAVC_ENABLE_ANALYSIS subroutine
SYS$LAVC_START_BUS.MAR subroutine
SYS$LAVC_STOP_BUS.MAR subroutine
SYS$LIBRARY system directory
SYS$MANAGER:SYCONFIG.COM command procedure
SYS$MANAGER:SYLOGICALS.COM command procedure
SYS$MANAGER:SYPAGSWPFILES.COM command procedure
SYS$MANAGER:SYSECURITY.COM command procedure
SYS$MANAGER:SYSTARTUP_VMS.COM command procedure
SYS$MANAGER system directory
SYS$QUEUE_MANAGER.QMAN$JOURNAL file
SYS$QUEUE_MANAGER.QMAN$QUEUES file
SYS$SPECIFIC directory
SYS$SYSROOT logical name
SYS$SYSTEM:STARTUP.COM command procedure
SYS$SYSTEM system directory
SYSALF.DAT file
    authorization elements
SYSAP protocol
    definition
    use of SCS
SYSAPs
SYSBOOT
    SET/CLASS command
SYSBOOT.EXE image
    renaming before rebooting satellite
SYSMAN (System Management utility)
    See System Management utility
SYSTARTUP.COM procedures
    setting up
System Dump Analyzer utility (SDA)
    monitoring PEDRIVER
System management
    AUTOGEN command procedure
    operating environments
    products
    Storage Library System
    SYSMAN utility
    System Dump Analyzer
    tools for daily operations
System Management utility (SYSMAN)
    enabling cluster alias operations
    modifying cluster group data
System parameters
    ACP_REBLDSYSD #1
    ACP_REBLDSYSD #2
    adjusting for cluster growth
    adjusting LRPSIZE parameter
    adjusting NISCS_MAX_PKTSZ parameter
    ALLOCLASS
    caution to prevent data corruption #1
    caution to prevent data corruption #2
    caution to prevent data corruption #3
    CHECK_CLUSTER
    cluster parameters
    CLUSTER_CREDITS
    CWCREPRC_ENABLE
    DISK_QUORUM
    DR_UNIT_BASE
    EXPECTED_VOTES #1
    EXPECTED_VOTES #2
    EXPECTED_VOTES #3
    EXPECTED_VOTES #4
    LOCKDIRWT #1
    LOCKDIRWT #2
    LRPSIZE
    MPDEV_D1
    MPDEV_ENABLE
    MPDEV_LCRETRIES
    MPDEV_POLLER
    MPDEV_REMOTE
    MSCP_BUFFER
    MSCP_CMD_TMO
    MSCP_CREDITS
    MSCP_LOAD #1
    MSCP_LOAD #2
    MSCP_SERVE_ALL #1
    MSCP_SERVE_ALL #2
    NISCS_CONV_BOOT #1
    NISCS_CONV_BOOT #2
    NISCS_CONV_BOOT #3
    NISCS_LAN_OVRHD
    NISCS_LOAD_PEA0 #1
    NISCS_LOAD_PEA0 #2
    NISCS_MAX_PKTSZ
    NISCS_PORT_SERV
    PASTDGBUF
    QDSKINTERVAL
    QDSKVOTES
    quorum
    RECNXINTERVAL
    retaining with feedback option
    SCSBUFFCNT
    SCSCONNCNT
    SCSMAXDG
    SCSMAXMSG
    SCSRESPCNT
    setting parameters in MODPARAMS.DAT file
    STARTUP_P1 set to MIN
    TAPE_ALLOCLASS #1
    TAPE_ALLOCLASS #2
    TIMVCFAIL
    TMSCP_LOAD #1
    TMSCP_LOAD #2
    TMSCP_SERVE_ALL
    updating in MODPARAMS.DAT and AGEN$ files
    VAXCLUSTER
    VOTES #1
    VOTES #2
System time
    setting clusterwide
SYSUAF.DAT files
    authorization elements
    creating common version
    determining process limits and quotas
    merging
    printing listing of
    setting up
SYSUAFALT.DAT files
    authorization elements


Previous Next Contents Index

  [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]  
  privacy and legal statement  
4477PRO_INDEX_004.HTML