![[Compaq]](../../images/compaq.gif)
![[Go to the documentation home page]](../../images/buttons/bn_site_home.gif)
![[How to order documentation]](../../images/buttons/bn_order_docs.gif)
![[Help on this site]](../../images/buttons/bn_site_help.gif)
![[How to contact us]](../../images/buttons/bn_comments.gif)
![[OpenVMS documentation]](../../images/ovmsdoc_sec_head.gif)
| Document revision date: 30 March 2001 | |
|
|
|
|
|
|
| Previous | Contents | Index |
The /NOTERMINATE qualifier allows you to create key definitions that insert text into command lines, after prompts, or into other text that you are typing.
The DEFINE/KEY command assigns a command string to a function key so that when you press that key, the command is executed.
LATCP> DEFINE/KEY PF4 "SHOW NODE " /NOTERMINATE/SET_STATE=GOLD
LATCP> DEFINE/KEY PF4 "/ALL"/IF_STATE=GOLD/TERMINATE
|
The first DEFINE/KEY command in this example assigns the SHOW NODE command to function key PF4. To process the SHOW NODE command, you must press Return after pressing PF4. Note the space after the word NODE in the first DEFINE/KEY command. This space allows you to enter a node name after pressing PF4. When you press Return, the SHOW NODE command is processed. If the space is omitted, LATCP does not recognize the command (SHOW NODE). The state is set to GOLD; that state will be in effect for the next key that you press.
The second DEFINE/KEY command defines the use of the PF4 key when the keypad is in the GOLD state. When you press PF4 twice, the SHOW NODE/ALL command is processed.
Deletes a logical link from a node. You must have OPER privilege to use this command.
DELETE LINK link-name
link-name
Specifies the name of the link that you want to delete.Use the SHOW LINK command for a list of the links that are defined for your node.
/LOG
/NOLOG (default)
Specifies whether LATCP displays a message confirming that the link was deleted. If you do not specify the /LOG or /NOLOG qualifier, the default is that no message will be displayed.
The DELETE LINK command stops any active sessions on the link and then deletes the link from your node.
LATCP> DELETE LINK NETWORK_A /LOG
|
This command deletes the link NETWORK_A. The link was created with the CREATE LINK command.
Deletes a logical port from a node. You must have OPER privilege to use this command.
DELETE PORT port-name
port-name
Specifies the name of the application port or the dedicated port that you want to delete. An application port connects to a remote device on a terminal server, whereas a dedicated port connects to a special service.Use the SHOW PORT command for a list of the application ports and the dedicated ports that are defined for your service node. You cannot use the DELETE PORT command to delete an interactive or forward LAT port.
/LOG
/NOLOG (default)
Specifies whether LATCP displays a message confirming that the port was deleted. If you do not specify the /LOG or /NOLOG qualifier, the default is that no message will be displayed.
The DELETE PORT command stops any active session on the port and then deletes the port from your service node.
LATCP> DELETE PORT LTA27:
|
This command deletes the LTA27: application port. The port was created with the CREATE PORT command.
Deletes an incoming queued request, or entry, from the local node.
DELETE QUEUE_ENTRY queue-entry-id
queue-entry-id
Specifies the identification number (ID) of the queued entry that you want to delete.
The DELETE QUEUE_ENTRY deletes an incoming queued request, or entry, from the local node. Use the SHOW QUEUE_ENTRY command to view the list of queued entries and their IDs.
LATCP> DELETE QUEUE_ENTRY 0056
|
This command deletes the queued request with an ID of 0056.
Deletes a service that your service node currently offers. You must have OPER privilege to use this command.
DELETE SERVICE service-name
service-name
Specifies the name of the service, as displayed by the SHOW SERVICE command.
/LOG
/NOLOG (default)
Specifies whether LATCP displays a message confirming that the service was deleted. If you do not specify the /LOG or /NOLOG qualifier, the default is that no message will be displayed.
The DELETE SERVICE command removes a service from a service node. The service is no longer available to terminal server users and is no longer multicast in the configuration messages sent by your service node. Existing connections to the service node are not affected.
LATCP> DELETE SERVICE SALES
|
This command removes the service SALES from your service node. The service is no longer available to server users.
Stops execution of LATCP and returns control to the DCL command level. You can also enter Ctrl/Z at any time to exit.
EXIT
None.
LATCP> EXIT
|
This command exits the LATCP program and returns control to the DCL command level.
Provides online help information for using the LATCP commands.
HELP [command-name...]
command-name
The name of a LATCP command or LATCP command and command keyword. If you enter the HELP command with a command name only, such as HELP SET, LATCP displays a list of all of the command keywords used with the SET command.
The HELP command is an online reference for LATCP commands. After you view an initial help display, press Return. The help display stops and the LATCP prompt is displayed. If you do not specify a command name, the HELP command displays general information about the commands for which help is available. Supplying a command name obtains syntax information for that command.
LATCP> HELP SET PORT
|
This command produces a description of the SET PORT command and shows the command format.
Displays previously entered LATCP commands on the screen so that you can execute them again.
RECALL [command-specifier]
command-specifier
Specifies the number or the first several characters of the LATCP command you want to recall. Command numbers can range from 1 to 20. The most recently entered command is number 1.Use the /ALL qualifier to display all the commands in the RECALL buffer, along with their command number so that you can determine the number of the command that you want to recall.
If you do not include the command specifier or the /ALL qualifier when entering the RECALL command, LATCP displays the last command.
/ALL
Specifies that LATCP display all the commands in the RECALL buffer. LATCP displays the number of each command.
When you enter a LATCP command, LATCP stores it in a RECALL buffer for later use with the RECALL command. The RECALL command itself is never stored in the RECALL buffer.When you use the RECALL command, LATCP displays the recalled command but does not process it. If you want the command processed as it appears, press Return. You can use the command line editing facility to make minor changes in the command line and then press Return to process the revised version of the command.
| #1 |
|---|
LATCP> RECALL 2
|
This command recalls the second-to-last command you entered.
| #2 |
|---|
LATCP> RECALL SET
|
This command recalls the last SET command you entered.
Refreshes the display screen so that any output from some other source (such as a broadcast message) is erased from the screen.
REFRESH
None.
Use the REFRESH command to refresh your display screen after output from other sources has overwritten the display screen. For example, if a broadcast message from a terminal server user is displayed on your screen, use the REFRESH screen to erase the broadcast message from the display. By default, you can refresh your screen by pressing Ctrl/W at the LATCP prompt.
LATCP> REFRESH
|
This command refreshes the display on your screen.
Retrieves information that has scrolled off the screen, either up or down.
SCROLL
None.
/DOWN[=value]
Scrolls the LATCP screen display down the number of lines indicated by the specified value. For convenience, you can also use the Next (or Next Screen) key on your keyboard to scroll down 15 lines (instead of entering the SCROLL/DOWN=15 command).If you do not specify a value, the default value is 1.
/UP[=value]
Scrolls the LATCP screen display up the number of lines indicated by the specified value. For convenience, you can also use the Prev (or Prev Screen) key on your keyboard to scroll up 15 lines (instead of entering the SCROLL/UP=15 command).If you do not specify a value, the default value is 1.
The SCROLL command allows you to retrieve information that has scrolled off the screen (either up or down). The command works only after a LATCP SHOW command has produced output that scrolled off the screen display area. Each subsequent SHOW command erases the previous output area such that the SCROLL command retrieves the screen display produced by the last executed SHOW command.
LATCP> SCROLL /UP=5
|
This command scrolls up to view five lines of screen display that has previously scrolled off the viewing area.
Changes the characteristics of LAT data links. You must have OPER privilege to use this command.
SET LINK link-name
link-name
Specifies the name for a LAT data link. A link name can have up to 16 ASCII characters. The characters allowed are as follows:
- Alphanumeric characters: A--Z, a--z, 0--9
- A subset of the international character set: ASCII codes 192--253
- Punctuation characters: dollar sign ($), hyphen (-), period (.), and underscore (_)
The SHOW LINK command displays the names of the links defined for a node.
/LOG
/NOLOG (default)
Specifies whether LATCP displays a message confirming that the link's characteristics were modified. If you do not specify the /LOG or /NOLOG qualifier, the default is that no message will be displayed./STATE=option
Specifies availability of the link for use. The two options for STATE are:
ON Specifies that the link will be available for use with the LAT protocol running. OFF Specifies that the link will not be available for use. If you do not specify the /STATE=option qualifier, the default is that the link will be available (ON).
The SET LINK command changes the characteristics for a LAT data link, which must have been created previously in one of the following ways:
- Interactively entering the CREATE LINK command
- Using the SET NODE/STATE=ON command to create a default link named LAT$LINK (if no other links are created when that command executes)
- Running a program that creates links
LATCP> SET LINK NETWORK_A /LOG /STATE=ON
|
This command directs LATCP to start the controller for link NETWORK_A and then to display a confirmation message.
Specifies the LAT characteristics of your local node. You must have OPER privilege to use this command.
SET NODE [node-name]
node-name
Specifies a node name for your local node. By default, the node name is the translation of SYS$NODE. A LAT node name should be the same as the DECnet node name. If the node is not running DECnet but will be in the future, Compaq recommends that you define SYS$NODE and use it for both DECnet and LAT node names.A LAT node name can be from 1 to 16 ASCII characters. The characters allowed are as follows:
- Alphanumeric characters: A--Z, a--z, 0--9
- A subset of the international character set: ASCII codes 192--253
- Punctuation characters: dollar sign ($), hyphen (-), period (.), and underscore (_)
/ANNOUNCEMENTS
/NOANNOUNCEMENTS
Controls whether your OpenVMS system multicasts information to the network.If you specify /NOANNOUNCEMENTS, LAT service announcements are disabled on the local node. Remote nodes must rely on the LAT service responder feature in the LAT protocol Version 5.2 or higher to connect to the local node. Therefore, Compaq recommends that you use this qualifier only in a networking environment where newer model terminal servers and hosts are present (all LAT hosts, terminal servers, and PCs are running LAT protocol Version 5.2 or higher).
If you specify /NOANNOUNCEMENTS in an environment where LAT protocol Version 5.1 is present, those LAT protocol Version 5.1 systems (for example, DECserver 100, 200, and 500 systems) will be unable to connect to any of the systems that have LAT service announcements disabled.
/CIRCUIT_TIMER[=msecs]
Controls the interval in milliseconds (msecs) between messages sent from the local node to other service nodes or terminal servers while connections to those nodes are active. Use this qualifier only if your node allows outgoing connections (/CONNECTIONS=OUTGOING_ONLY or /CONNECTIONS=BOTH).A low value for the interval decreases the response time for the port but increases the demand on service nodes. Set the circuit timer in the range of 10 to 1000 msecs.
The default value of 80 msecs gives a generally acceptable response time while creating a moderately low overhead on the service nodes. You cannot change this parameter when active or pending LAT connections exist.
/CONNECTIONS=option
Specifies the type of connections permissible on the local node. The four options for CONNECTIONS are:
INCOMING_ONLY Specifies that the local node permit incoming connections only. OUTGOING_ONLY Specifies that the local node permit outgoing connections only. Specify this on systems that can tolerate the overhead associated with outgoing connections, such as standalone systems. BOTH Specifies that the local node permit both incoming and outgoing connections. Specify this on systems that can tolerate the overhead associated with outgoing connections, such as standalone systems. NONE Specifies that the local node disallow both incoming and outgoing connections. If you do not specify the /CONNECTIONS=option qualifier, the default is that the node will permit incoming connections only.
/CPU_RATING=cpu-power
/NOCPU_RATING
The /CPU_RATING qualifier assigns your local node a rating that represents the power of your node's CPU (central processing unit) relative to other CPUs in the LAN. The value of cpu-power can range from 1 (for a CPU with the lowest power) to 100 (for a CPU with the highest power).When a terminal server or node requests a connection to a service that is offered on the local node and one or more other service nodes, the requesting node selects the service node with the highest (most favorable) service rating, based on the overall level of activity of the node that offers the service and the amount of memory. This selection process is called load balancing.
You can influence the rating for services on your node by specifying a value for the /CPU_RATING qualifier. If you specify a high value for cpu-power, the LAT driver will calculate a relatively high service rating for services on your node (service ratings as high as 255 are possible). If you specify a low value, the LAT driver will calculate relatively low service ratings; connections will most likely be made to the same service that is offered on other nodes. In either case, the LAT driver can calculate a greater range of values for dynamic service ratings (the entire range from 0 to 255). Consequently, the ratings will more accurately reflect the availability of the service node.
If you do not specify either the /CPU_RATING=cpu-power or /NOCPU_RATING qualifier, the default is that no CPU rating will be used A value of 0 indicates no CPU rating.
/DEVICE_SEED[=value]
Sets the default starting number (within a range from 1 to 9999) for the unit numbers that will be assigned to new LTA devices. Note that when ports are created by assigning a channel to LTA0: with the $ASSIGN system service, the channel numbers fall in this same range.The default device seed value is approximately half of the maximum unit number (which you set by using the /UNIT_NUMBER_MAXIMUM qualifier). Interactive LAT ports, and those created with the CREATE PORT/LOGICAL command, are assigned unit numbers beginning with the specified device seed value and continuing up to the maximum unit number. When the maximum unit number is reached, the port is assigned the next available unit number beginning at the bottom of the range (LTA1:).
Note that each time you specify the /UNIT_NUMBER_MAXIMUM qualifier, the device seed value is reset to approximately half of the newly specified maximum unit number.
/FORWARD_SESSION_LIMIT[=value]
Controls the number of sessions (a value within a range from 16 to 255) allowed on each outgoing connection. By default, 16 sessions are allowed on an outgoing connection, which means that 16 individual processes can direct the DCL command SET HOST/LAT to the same remote node.You must increase the value for the /FORWARD_SESSION_LIMIT qualifier if a user on your system enters the command SET HOST/LAT and receives an error message indicating that the session limit for the LAT circuit has been reached (%LAT-F-VCSESLIM). Note, however, that you can change this value only when no connections exist.
/GROUPS=option[,...]
Gives the listed groups access to services offered on your local node or prevents the listed groups from accessing services offered on your local node, depending on the options used.A network manager organizes terminal server nodes into groups based on the number of terminal server nodes in the LAT network. Groups subdivide the LAT network, limiting the number of terminal server nodes that can connect with a given service node.
As many as 256 groups, numbered 0 to 255, can be in the LAT network. By default, all terminal server nodes and nodes supporting outgoing connections belong to group 0. If you enter one group code, you can omit the parentheses. Use the SHOW NODE command for a list of the groups enabled for your service node.
The /GROUPS qualifier has several options. For each option described, you can specify more than one group by:
- Listing them separated by commas
- Specifying a range
The available options are:
ENABLE= group-code[,...] Gives the listed groups access to your service node. DISABLE= group-code[,...] Prevents the listed groups from accessing your service node. The listed groups had been enabled previously for access to your node. ENABLE= group-code[,...],
DISABLE= group-code[,...]This option lets you enable certain groups and disable other groups in one command line: gives access to the groups listed with the ENABLE option and removes access from the groups listed with the DISABLE option. Enclose both ENABLE and DISABLE in parentheses; for example, /GROUP=(ENABLE=(10,12),
DISABLE=(1-30)).Example 2 shows how to specify the /GROUPS qualifier with the SET NODE command.
/IDENTIFICATION[="identification-string"]
Describes and identifies a node. Service nodes include the identification string in service announcements. A service node announces its services at regular intervals established with the SET NODE command. Entering the LATCP command SHOW NODE or the DECserver command SHOW NODE generates a display that includes this identification string. By default, the identification string is the translation of SYS$ANNOUNCE.You cannot specify more than 64 ASCII characters in an identification string (a SYS$ANNOUNCE longer than that will be truncated to the first 64 characters). Enclose the string in quotation marks (" ").
/KEEPALIVE_TIMER[=secs]
Controls the maximum interval, in seconds, between idle run messages sent by your local node to another service node to which it has a LAT connection. Your node sends these messages when no other traffic is being generated over the virtual circuit. If the service node acknowledges these messages, your node will continue to monitor the status of the circuit. If your node does not receive acknowledgment, it responds as if the circuit is down.Use this qualifier only if your node allows outgoing connections (/CONNECTIONS=OUTGOING_ONLY or /CONNECTIONS=BOTH).
The default value is 20. Compaq recommends this value for normal LAN environments. For a heavily loaded LAN, consider using a higher value. Set the timer in the range of 10 to 255. For applications that require quick notification and possible failover of a service node failure, use a lower value. You cannot change this value if active or pending connections exist.
/LARGE_BUFFER
/NOLARGE_BUFFER
Controls whether the LAT software uses large buffers while managing communications between OpenVMS systems (the default).If you must use the /NOLARGE_BUFFER qualifier (for example, to limit packet sizes to be no larger than the Ethernet maximum), Compaq recommends that you specify this command after all logical LAT links have been created and before the LAT node has been turned on. For example, note the following commands in LAT$SYSTARTUP.COM:
$! $! Create each logical LAT link with a unique name and $! unique LAN address (forced with /NODECNET). $! $ LCP CREATE LINK FDDI_1 /DEVICE=FCA0 /NODECNET $ LCP CREATE LINK FDDI_2 /DEVICE=FCB0 /NODECNET $! $! Don't use large buffer support (force packet $! sizes to be no larger than what Ethernet can $! support). $! $ LCP SET NODE /NOLARGE_BUFFER $! $! Turn on the LAT protocol. $! $ LCP SET NODE /STATE=ON/LOG
/NOLOG (default)
Specifies whether LATCP displays a message confirming that the node's characteristics were modified. If you do not specify the /LOG or /NOLOG qualifier, the default is that no message will be displayed./MULTICAST_TIMER[=secs]
Specifies the time, in seconds, between multicast messages sent by a service node. A multicast message announces the services offered by a service node. The minimum value is 10 seconds; the maximum is 180 seconds. The default value is 60./NODE_LIMIT=value
/NONODE_LIMIT
Specifies the maximum number of service nodes that your local node can store in its service and node database. Use this qualifier only if your node allows outgoing connections (/CONNECTIONS=OUTGOING_ONLY or /CONNECTIONS=BOTH).
Previous Next Contents Index
privacy and legal statement 6048PRO_035.HTML