Document revision date: 30 March 2001
[Compaq] [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]
[OpenVMS documentation]
OpenVMS Delta/XDelta Debugger Manual

OpenVMS Delta/XDelta Debugger Manual

Order Number: AA--PWCAD--TE


April 2001

This manual describes the OpenVMS Delta and XDelta debuggers. OpenVMS Delta is used to debug programs that run in privileged processor mode at interrupt priority level 0. OpenVMS XDelta is used to debug programs that run at an elevated interrupt priority level.

Revision/Update Information: This manual supersedes the OpenVMS Delta/XDelta Debugger Manual, OpenVMS VAX Version 7.1
OpenVMS AXP Version 7.1.

Software Version: OpenVMS Alpha Version 7.3 OpenVMS VAX Version 7.3



Compaq Computer Corporation Houston, Texas


© 2001 Compaq Computer Corporation

Compaq, VAX, VMS, and the Compaq logo Registered in U.S. Patent and Trademark Office.

OpenVMS is a trademark of Compaq Information Technologies Group, L.P. in the United States and Other Countries.

All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies.

Confidential computer software. Valid license from Compaq required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.

ZK4540

The Compaq OpenVMS documentation set is available on CD-ROM.

Contents Index


Preface

Intended Audience

This manual is written for programmers who debug system code for device drivers and other images that execute in privileged processor-access modes or at an elevated interrupt priority level (IPL).

Document Structure

This manual consists of the following chapters and appendixes:

Related Documents

This manual refers to several documents that contain the primary descriptions of topics discussed in this manual. The following table lists the topics and those documents.
Topic Document
Accessing OpenVMS VAX through a lower priority interrupt level OpenVMS System Manager's Manual
Boot command qualifiers for Volume Shadowing Volume Shadowing for OpenVMS
Device name parameters OpenVMS System Manager's Manual
Editing the boot command procedure for certain VAX processors OpenVMS VAX Upgrade and Installation Supplement: VAX 8530, 8550, 8810 (8700), and 8820--N (8800)
IPRs for OpenVMS Alpha Alpha Architecture Reference Manual
IPRs for OpenVMS VAX VAX Architecture Reference Manual
PALcode opcodes for OpenVMS Alpha Alpha Architecture Reference Manual
SDA commands for OpenVMS VAX OpenVMS VAX System Dump Analyzer Utility Manual
SDA commands for OpenVMS Alpha OpenVMS Alpha System Dump Analyzer Utility Manual (This manual has been archived. The information can be found in the OpenVMS Alpha System Analysis Tools Manual.)

For additional information about Compaq OpenVMS products and services, access the following World Wide Web address:


http://www.openvms.compaq.com/ 

Reader's Comments

Compaq welcomes your comments on this manual. Please send comments to either of the following addresses:
Internet openvmsdoc@compaq.com
Mail Compaq Computer Corporation
OSSG Documentation Group, ZKO3-4/U08
110 Spit Brook Rd.
Nashua, NH 03062-2698

How to Order Additional Documentation

Use the following World Wide Web address to order additional documentation:


http://www.openvms.compaq.com/ 

If you need help deciding which documentation best meets your needs, call 800-282-6672.

Conventions

The following conventions are used in this manual:
Ctrl/ x A sequence such as Ctrl/ x indicates that you must hold down the key labeled Ctrl while you press another key or a pointing device button.
PF1 x A sequence such as PF1 x indicates that you must first press and release the key labeled PF1 and then press and release another key or a pointing device button.
[Return] In examples, a key name enclosed in a box indicates that you press a key on the keyboard. (In text, a key name is not enclosed in a box.)

In the HTML version of this document, this convention appears as brackets, rather than a box.

... A horizontal ellipsis in examples indicates one of the following possibilities:
  • Additional optional arguments in a statement have been omitted.
  • The preceding item or items can be repeated one or more times.
  • Additional parameters, values, or other information can be entered.
.
.
.
A vertical ellipsis indicates the omission of items from a code example or command format; the items are omitted because they are not important to the topic being discussed.
( ) In command format descriptions, parentheses indicate that you must enclose choices in parentheses if you specify more than one.
[ ] In command format descriptions, brackets indicate optional choices. You can choose one or more items or no items. Do not type the brackets on the command line. However, you must include the brackets in the syntax for OpenVMS directory specifications and for a substring specification in an assignment statement.
| In command format descriptions, vertical bars separate choices within brackets or braces. Within brackets, the choices are optional; within braces, at least one choice is required. Do not type the vertical bars on the command line.
{ } In command format descriptions, braces indicate required choices; you must choose at least one of the items listed. Do not type the braces on the command line.
bold text This typeface represents the introduction of a new term. It also represents the name of an argument, an attribute, or a reason.
italic text Italic text indicates important information, complete titles of manuals, or variables. Variables include information that varies in system output (Internal error number), in command lines (/PRODUCER= name), and in command parameters in text (where dd represents the predefined code for the device type).
UPPERCASE TEXT Uppercase text indicates a command, the name of a routine, the name of a file, or the abbreviation for a system privilege.
Monospace text Monospace type indicates code examples and interactive screen displays.

In the C programming language, monospace type in text identifies the following elements: keywords, the names of independently compiled external functions and files, syntax summaries, and references to variables or identifiers introduced in an example.

- A hyphen at the end of a command format description, command line, or code line indicates that the command or statement continues on the following line.
numbers All numbers in text are assumed to be decimal unless otherwise noted. Nondecimal radixes---binary, octal, or hexadecimal---are explicitly indicated.


Chapter 1
Invoking, Exiting, and Setting Breakpoints

This chapter presents an overview of the Delta and XDelta Debuggers. It then describes the following:

1.1 Overview of the Delta and XDelta Debuggers

The Delta and XDelta Debuggers are used to monitor the execution of user programs and the OpenVMS operating system. They use the same commands and the same expressions, but they differ in how they operate. DELTA operates as an exception handler in a process context. XDELTA is invoked directly from the hardware SCB vector in a system context.

Because DELTA operates in a process context, use it to debug user-mode programs or programs that execute at interrupt priority level (IPL) 0 in any processor mode. You cannot use DELTA to debug code that executes at an elevated IPL. To debug with DELTA, invoke it from within your process by specifying it as the debugger (as opposed to the symbolic debugger).

Because XDELTA is invoked directly from the hardware SCB vector, it can be used to debug programs executing in any processor mode or at any IPL level. Use it to debug programs that execute at an elevated IPL. Because XDELTA is not process specific, it is not invoked from a process. To debug with XDELTA, you must boot the processor with commands to include XDELTA in memory. XDELTA's existence terminates when you reboot the processor without XDELTA.

1.2 Privileges Required for Running DELTA

No privileges are required to run DELTA to debug a program that runs in user mode. To debug a program that runs in other processor-access modes, the process in which you run the program must have the necessary privileges.

To use the ;M command, your process must have change-mode-to-kernel (CMKRNL) privilege. The ;M command sets all processes writable.

To use the ;L command (List All Loaded Executive Modules), you must have change-mode-to-executive (CMEXEC) privilege.

1.3 Guidelines for Using XDELTA

Because XDELTA is not process specific, privileges are not required.

When using XDELTA, you must use the console terminal. You should run XDELTA only on a standalone system because all breakpoints are handled at IPL 31.

You cannot redirect output from XDELTA. To determine if your system maintains a log file, check your hardware manual. You can produce a log of console sessions by connecting the console port of the system that will boot with XDELTA to the serial port of a LAT server. Then, from another system, use the command SET HOST/LAT/LOG to that LAT port.

1.4 Invoking DELTA

To invoke DELTA, perform the following steps after assembling (or compiling) and linking your program:

  1. Define DELTA as the default debugger instead of the symbolic debugger with the following command:


    $ DEFINE LIB$DEBUG SYS$LIBRARY:DELTA
    

  2. Use the following RUN command to execute your program:


    $ RUN/DEBUG MYPROG
    

When DELTA begins execution, it displays its name and current version number. DELTA displays the first executable instruction in the program with which it is linked. It displays the address of that instruction, a separator (a slash (/) on VAX and an exclamation point (!) on Alpha), and the instruction and its operands.

On VAX, the name, current version number, and address are displayed as follows:


DELTA Version 5.5 
address/instruction operands 
 
 

On Alpha, the name, current version number, and address are displayed as follows:


AlphaVMS DELTA Version 1.0 
address!instruction operands 
 
 

On Alpha and VAX, DELTA is then ready for your commands.

You can redirect output from a DELTA debugging session by assigning DBG$DELTA to the I/O device.

Note

The image activator on OpenVMS Alpha systems automatically activates SYS$SHARE:SYS$SSISHR.EXE when an image is debugged using the RUN/DEBUG command or is linked using the /DEBUG qualifier. The presence of this image should not alter your program's correctness, but if your program is sensitive to virtual address layout or if for some reason SYS$SHARE:SYS$SSISHR.EXE is not installed properly on your system, you may want to bypass its automatic activation.

To keep the image activator from activating SYS$SHARE:SYS$SSISHR.EXE for you, define the logical name SSI$AUTO_ACTIVATE to be "OFF" before running the program to be debugged with Delta.

1.5 Exiting from DELTA

To exit from DELTA, type EXIT and press the Return key. When you are in user mode, you exit DELTA and your process remains. When you are in a privileged access mode, your process can be deleted.

1.6 Invoking XDELTA

To invoke XDELTA, perform the following steps:

  1. Boot the system using a console command or a command procedure that includes XDELTA.
  2. On VAX, an initial XDELTA breakpoint is taken so that you can set additional breakpoints or examine and change locations in memory. XDELTA displays the following breakpoint message:


    1 BRK at address
     address/instruction
    

    Note

    Never clear breakpoint 1 from any code being debugged in XDELTA. If you accidentally clear breakpoint 1 and no other breakpoints are set, you cannot use XDELTA until you reboot again with XDELTA.

    On Alpha, two initial XDELTA breakpoints are taken so that you can set additional breakpoints or examine and change locations in memory. XDELTA displays the following message for the first breakpoint:


    BRK 0 at address
     address!instruction
     
     
    

  3. On Alpha and VAX, proceed from the initial breakpoint, using the following command:


    ;P  [Return]
    

On VAX, the procedure for booting the system with XDELTA differs, depending on the model of your system. Each procedure uses commands that include XDELTA in memory and cause the execution of a breakpoint in OpenVMS initialization routines. Execution of the breakpoint instruction transfers program control to a fault handler located in XDELTA.

Some boot procedures require the use of the /R5 qualifier with the boot command. The /R5 qualifier enters a value for a flag that controls the way XDELTA is loaded. The flag is a 32-bit hexadecimal integer loaded into R5 as input to VMB.EXE, the primary boot program. Refer to Table 1-1 for a description of the valid values for this flag.

Note

When you deposit a boot command qualifier value in R5, make sure that any other values you would normally deposit are included. For example, if you were depositing the number of the system root directory from which you were booting and an XDELTA value, R5 would contain both values.

For directions for booting XDelta on a VAX computer, refer to the OpenVMS VAX supplement specific to your computer.

On Alpha, the procedure for booting all Alpha systems with XDELTA is the same. For one example of how to boot XDELTA, use the boot command as follows:


>>> BOOT -FLAG 0,7

The flag for specifying boot qualifiers is a 64-bit integer that is passed directly as input to APB.EXE, the primary boot program. Refer to Table 1-1 for a description of the valid values for this flag.

Table 1-1 Boot Command Qualifier Values
Value Description
0 Normal, nonstop boot (default)
1 Stop in SYSBOOT
2 Include XDELTA, but do not take the initial breakpoint
3 Stop in SYSBOOT, include XDELTA, but do not take the initial breakpoint
6 Include XDELTA, and take the initial breakpoint
7 Include XDELTA, stop in SYSBOOT, and take the initial breakpoint at system initialization

1.7 Requesting an Interrupt

On Alpha and VAX, if you set the boot control flag to 7, XDELTA will stop at an initial breakpoint during the system boot process. You can then set other breakpoints or examine locations in memory.

Your program can also call the routine INI$BRK, which in turn executes the first XDELTA breakpoint. Refer to Section 1.8 for the breakpoint procedure.

Once loaded into memory, XDELTA can also be invoked at any time from the console by requesting a software interrupt. For example, you might need to use a software interrupt to enter XDELTA if your program is in an infinite loop or no INI$BRK call had been made.

On VAX, INI$BRK is defined as XDELTA's breakpoint 1.

Note

Never clear breakpoint 1 from any code being debugged in XDELTA. If you accidentally clear breakpoint 1 and no other breakpoints are set, you cannot use XDELTA again until you reboot with XDELTA.

On Alpha, INI$BRK is defined as XDELTA's breakpoint 0. It is not possible to clear breakpoint 0 from any code being debugged in XDELTA.

1.7.1 Requesting Interrupts on VAX Computers

For a VAX 8530, 8550, 8600, 8650, 8810 (8700), 8820, 8820-N (8800), 8830, 8840, VAX-11/780, or VAX-11/785 computer, enter the following commands at the console terminal to request the interrupt:


$ [Ctrl/P]
>>> HALT
>>> D/I 14 E
>>> C

For a VAX 9000 computer, enter the following commands at the console terminal to request the interrupt:


$ [Ctrl/P]
>>> HALT/CPU=ALL
>>> D/I 14 E
>>> C/CPU=ALL

For a VAX 6000 series, 8200, 8250, 8300, 8350, VAX-11/730, or a VAX-11/750 computer, enter the following commands:


$ [Ctrl/P]
>>> D/I 14 E
>>> C

For a VAXstation 3520 or 3540 computer, perform the following steps:

  1. Press and release the Halt button on the CPU control panel. When you release the Halt button, make sure it is popped out or the system will remain halted. You can also press the Break key (if enabled) on the console terminal.
  2. Enter the following commands:


    >>> D/I 14 E
    >>> C/ALL
    

For a VAXft 3000, VAXft-410, VAXft-610, or VAXft-612 computer, enter the following commands at the console terminal to request the interrupt:


$  [Break] or [F5] 
>>> HALT
>>> D/I 14 E
>>> CONT
>>> PIO

For a VAX 7000 or VAX 10000 series computer, enter the following commands at the console terminal to request the interrupt. If you are operating in secure mode, first set the keyswitch to ENABLE before entering these commands.


$  [Ctrl/P]
>>> D IPR:14 E
>>> CONT

For a VAXstation 2000, MicroVAX 2000, MicroVAX 3300/3400 series, MicroVAX or VAXstation 3500/3600 series, MicroVAX 3800/3900 series, VAX 4000 series, or MicroVAX II computer, perform the following steps:

  1. Press and release the Halt button on the CPU control panel. When you release the Halt button, make sure it is popped out or the system will remain halted. You can also press the Break key (if enabled) on the console terminal.
  2. Enter the following commands:


    >>> D/I 14 E
    >>> C
    

For an alternative method of accessing OpenVMS through a lower priority interrupt, refer to the OpenVMS System Manager's Manual.


Next Contents Index

  [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]  
  privacy and legal statement  
4540PRO.HTML