Skip to Main Content United States    
PRODUCTS SUPPORT SOLUTIONS SERVICES
COMPAQ SOFTWARE
Compaq C

Compaq C
Run-Time Library Reference Manual for OpenVMS Systems


Previous Contents Index


dup, dup2

Allocate a new descriptor that refers to a file specified by a file descriptor returned by open , creat , or pipe .

Format

#include <unistd.h>

int dup (int file_desc1);

int dup2 (int file_desc1, int file_desc2);


Arguments

file_desc1

The file descriptor being duplicated.

file_desc2

The new file descriptor to be assigned to the file designated by file_desc1.

Description

The dup function causes a previously unallocated descriptor to refer to its argument, while the dup2 function causes its second argument to refer to the same file as its first argument.

The argument file_desc1 is invalid if it does not describe an open file; file_desc2 is invalid if the new file descriptor cannot be allocated. If file_desc2 is connected to an open file, that file is closed.


Return Values

n The new file descriptor.
--1 Indicates that an invalid argument was passed to the function.

[no]echo

Set the terminal so that characters may or may not be echoed on the terminal screen. This mode of single-character input is only supported with Curses.

Format

#include <curses.h>

void echo (void);

void noecho (void);


Description

The noecho function may be helpful when accepting input from the terminal screen with wgetch and wgetstr ; it prevents the input characters from being written onto the screen.

ecvt

Converts its argument to a null-terminated string of ASCII digits and returns the address of the string. The string is stored in a thread-specific memory location created by the Compaq C RTL.

Format

#include <stdlib.h>

char *ecvt (double value, int ndigits, int *decpt, int *sign);


Arguments

value

An object of type double that is converted to a null-terminated string of ASCII digits.

ndigits

The number of ASCII digits to be used in the converted string.

decpt

The position of the decimal point relative to the first character in the returned string. A negative int value means that the decimal point is decpt number of spaces to the left of the returned digits, (the spaces being filled with zeros). A 0 value means that the decimal point is immediately to the left of the first digit in the returned string.

sign

An integer value that indicates whether the value argument is positive or negative. If value is negative, the function places a nonzero value at the address specified by sign. Otherwise, the function assigns 0 to the address specified by sign.

Description

This function converts value to a null-terminated string of length ndigits, and returns a pointer to it. The resulting low-order digit is rounded to the correct digit for outputting ndigits digits in C E-format. The decpt argument is assigned the position of the decimal point relative to the first character in the string.

Repeated calls to the ecvt function overwrite any existing string.

The ecvt , fcvt , and gcvt functions represent the following special values specified in the IEEE Standard for floating-point arithmetic:
Value Representation
Quiet NaN NaNQ
Signalling NaN NaNS
+Infinity Infinity
--Infinity --Infinity

The sign associated with each of these values is stored into the sign argument. In IEEE floating-point representation, a value of 0 (zero) can be positive or negative, as set by the sign argument.

See also gcvt and fcvt in this section.


Return Value

x The value of the converted string.

endpwent

Closes the user database.

Format

#include <stdio.h>

#include <pwd.h>

void endpwent (void);


Description

This function closes the user database. The user database basic user attributes are accessed with the getpwent , getpwuid , getpwnam , or setpwent functions.

See also getpwent , getpwuid , getpwnam , and setpwent in this section


endwin

Clears the terminal screen and frees any virtual memory allocated to Curses data structures.

Format

#include <curses.h>

void endwin (void);


Description

A program that calls Curses functions must call the endwin function before exiting to restore the previous environment of the terminal screen.

erand48

Generate uniformly distributed pseudorandom number sequences. Returns 48-bit nonnegative, double-precision, floating-point values.

Format

#include <stdlib.h>

double erand48 (unsigned short int xsubi[3]);


Argument

xsubi

An array of three short int , which form a 48-bit integer when concatentated together.

Description

This function generates pseudorandom numbers using the linear congruential algorithm and 48-bit integer arithmetic.

It returns nonnegative, double-precision, floating-point values uniformly distributed over the range of y values, such that, 0.0 <= y < 1.0.

The erand48 function works by generating a sequence of 48-bit integer values, Xi, according to the linear congruential formula:


       Xn+1 = (aXn+c)mod m        n >= 0 

The argument m equals 248 , so 48-bit integer arithmetic is performed. Unless you invoke the lcong48 function, the multiplier value a and the addend value c are:


      a = 5DEECE66D16 = 2736731631558
      c = B16 = 138

The erand48 function requires that the calling program pass an array as the xsubi argument. For the first call, the array must be initialized to the value of the pseudorandom number sequence. Unlike the drand48 function, it is not necessary to call an initialization function prior to the first call.

By using different arguments, the erand48 function allows separate modules of a large program to generate several independent sequences of pseudorandom numbers; for example, the sequence of numbers that one module generates does not depend upon how many times the function is called by other modules.


Return Values

n A nonnegative, double-precision, floating-point value.

[w]erase

Erase the window by painting it with blanks. The erase function acts on the stdscr window.

Format

#include <curses.h>

int erase();

int werase (WINDOW *win);


Argument

win

A pointer to the window.

Description

Both the erase and werase functions leave the cursor at the current position on the terminal screen after completion; they do not return the cursor to the home coordinates of (0,0).

Return Values

OK Indicates success.
ERR Indicates an error.

erf

Returns the error function of its argument.

Format

#include <math.h>

double erf (double x);

float erff (float x); (ALPHA ONLY)

long double erfl (long double x); (ALPHA ONLY)

double erfc (double x); (ALPHA ONLY)

float erfcf (float x); (ALPHA ONLY)

long double erfcl (long double x); (ALPHA ONLY)


Argument

x

A radian expressed as a real number.

Description

The erf functions return the error function of x, where erf (x), erff (x), and erfl (x) equal (2/sqrt(pi)) times the area under the curve e**(-t**2) between 0 and x.

The erfc functions return (1.0 - erf(x)). The erfc function can result in an underflow as x gets large.


Return Values

x The value of the error function ( erf ) or complementary error function ( erfc ).
NaN x is NaN; errno is set to EDOM.
0 Underflow ocurred; errno is set to ERANGE.

execl

Passes the name of an image to be activated in a child process. This function is nonreentrant.

Format

#include <unistd.h>

int execl (const char *file_spec, const char *arg0, ..., (char *)0); (ISO POSIX-1)

int execl (char *file_spec, ...); (COMPATABILITY)


Arguments

file_spec

The full file specification of a new image to be activated in the child process.

arg0, ...

A sequence of pointers to null-terminated character strings.

If the POSIX-1 format is used, at least one argument must be present and must point to a string that is the same as the new process file name (or its last component). (This pointer can also be the NULL pointer, but then execle would accomplish nothing.) The last pointer must be the NULL pointer. This is also the convention if the compatibility format is used.


Description

To understand how the exec functions operate, consider how the OpenVMS system calls any Compaq C program, as shown in the following syntax:

int main (int argc, char *argv[], char *envp[]);

The identifier argc is the argument count; argv is an array of argument strings. The first member of the array (argv[0]) contains the name of the image. The arguments are placed in subsequent elements of the array. The last element of the array is always the NULL pointer.

An exec function calls a child process in the same way that the run-time system calls any other Compaq C program. The exec functions pass the name of the image to be activated in the child; this value is placed in argv[0]. However, the functions differ in the way they pass arguments and environment information to the child:

  • Arguments can be passed in separate character strings ( execl , execle , and execlp ) or in an array of character strings ( execv , execve , and execvp ).
  • The environment can be explicitly passed in an array ( execle and execve ) or taken from the parent's environment ( execl , execv , execlp , and execvp ).

If vfork was called before invoking an exec function, then when the exec function completes, control is returned to the parent process at the point of the vfork call. If vfork was not called, the exec function waits until the child has completed execution and then exits the parent process. See vfork in this section and Chapter 5 for more information.


Return Value

--1 Indicates failure.

execle

Passes the name of an image to be activated in a child process. This function is nonreentrant.

Format

#include <unistd.h>

int execle (char *file_spec, char *arg0, ..., (char *)0, char *envp[]); (ISO POSIX-1)

int execle (char *file_spec, ...); (COMPATABILITY)


Arguments

file_spec

The full file specification of a new image to be activated in the child process.

arg0, ...

A sequence of pointers to null-terminated character strings.

If the POSIX-1 format is used, at least one argument must be present and must point to a string that is the same as the new process file name (or its last component). (This pointer can also be the NULL pointer, but then execle would accomplish nothing.) The last pointer must be the NULL pointer. This is also the convention if the compatibility format is used.

envp

An array of strings that specifies the program's environment. Each string in envp has the following form:

name = value

The name can be one of the following names and the value is a null-terminated string to be associated with the name:

  • HOME---Your login directory
  • TERM---The type of terminal being used
  • PATH---The default device and directory
  • USER---The name of the user who initiated the process

The last element in envp must be the NULL pointer.

When the operating system executes the program, it places a copy of the current environment vector (envp) in the external variable environ.


Description

See execl in this section for a description of how the exec functions operate.

Return Value

--1 Indicates failure.

execlp

Passes the name of an image to be activated in a child process. This function is nonreentrant.

Format

#include <unistd.h>

int execlp (const char *file_name, const char *arg0, ..., (char *)0); (ISO POSIX-1)

int execlp (char *file_name, ...); (COMPATABILITY)


Arguments

file_name

The file name of a new image to be activated in the child process. The device and directory specification for the file is obtained by searching the environment name VAXC$PATH.

argn

A sequence of pointers to null-terminated character strings. By convention, at least one argument must be present and must point to a string that is the same as the new process file name (or its last component).

...

A sequence of pointers to strings. At least one pointer must exist to terminate the list. This pointer must be the NULL pointer.

Description

See execl in this section for a description of how the exec functions operate.

Return Value

--1 Indicates failure.

execv

Passes the name of an image to be activated in a child process. This function is nonreentrant.

Format

#include <unistd.h>

int execv (char *file_spec, char *argv[]);


Arguments

file_spec

The full file specification of a new image to be activated in the child process.

argv

An array of pointers to null-terminated character strings. These strings constitute the argument list available to the new process. By convention, argv[0] must point to a string that is the same as the new process file name (or its last component). argv is terminated by a NULL pointer.

Description

See execl in this section for a description of how the exec functions operate.

Return Value

--1 Indicates failure.

execve

Passes the name of an image to be activated in a child process. This function is nonreentrant.

Format

#include <unistd.h>

int execve (const char *file_spec, char *argv[], char *envp[]);


Arguments

file_spec

The full file specification of a new image to be activated in the child process.

argv

An array of pointers to null-terminated character strings. These strings constitute the argument list available to the new process. By convention, argv[0] must point to a string that is the same as the new process file name (or its last component). argv is terminated by a NULL pointer.

envp

An array of strings that specifies the program's environment. Each string in envp has the following form:

name = value

The name can be one of the following names and the value is a null-terminated string to be associated with the name:

  • HOME---Your login directory
  • TERM---The type of terminal being used
  • PATH---The default device and directory
  • USER---The name of the user who initiated the process

The last element in envp must be the NULL pointer.

When the operating system executes the program, it places a copy of the current environment vector (envp) in the external variable environ .


Description

See execl in this section for a description of how the exec functions operate.

Return Value

--1 Indicates failure.

execvp

Passes the name of an image to be activated in a child process. This function is nonreentrant.

Format

#include <unistd.h>

int execvp (const char *file_name, char *argv[]);


Arguments

file_name

The file name of a new image to be activated in the child process. The device and directory specification for the file is obtained by searching the environment name VAXC$PATH.

argv

An array of pointers to null-terminated character strings. These strings constitute the argument list available to the new process. By convention, argv[0] must point to a string that is the same as the new process file name (or its last component). argv is terminated by a NULL pointer.

Description

See execl in this section for a description of how the exec functions operate.

Return Value

--1 Indicates failure.

exit, _exit

Terminate execution of the program from which they are called. These functions are nonreentrant.

Format

#include <stdlib.h>

void exit (int status);

#include <unistd.h>

void _exit (int status);


Argument

status

A status value of EXIT_SUCCESS (0), EXIT_FAILURE (1), or a number from 2 to 255:
  • A status value of 0 or EXIT_SUCCESS is translated to the OpenVMS SS$_NORMAL status code to return the OpenVMS success value.
  • A status value of 1 or EXIT_FAILURE is translated to an error-level exit status. The status value is passed to the parent process.
  • Any other status value is left the same.

To use these status values as described, include <unistd.h> and compile with the _POSIX_EXIT feature-test macro set (either with /DEFINE=_POSIX_EXIT or with #define _POSIX_EXIT at the top of your file, before any file inclusions). This behavior is available only on OpenVMS Version 7.0 and higher systems.


Description

If the process was invoked by the DIGITAL Command Language (DCL), the status is interpreted by DCL and a message is displayed.

If the process was a child process created using vfork or an exec function, then the child process exits and control returns to the parent. The two functions are identical; the _exit function is retained for reasons of compatibility with VAX C.

The exit and _exit functions make use of the $EXIT system service. If your process is being invoked by the RUN command using any of the hibernation and scheduled wakeup qualifiers, the process might not correctly return to hibernation state when an exit or _exit call is made.

Note

EXIT_SUCCESS and EXIT_FAILURE are portable across any ANSI C compiler to indicate success or failure. On OpenVMS systems, they are mapped to OpenVMS condition codes with the severity set to success or failure, respectively. Values in the range of 2 to 255 can be used by a child process to communicate a small amount of data to the parent. The parent retreives this data using the wait , wait3 , wait4 , or waitpid functions.


Previous Next Contents Index
Buy Online or Call 1.800.888.0220      privacy statement and legal notices 
STORES CONTACT US SEARCH PRODUCTS SOLUTIONS OPTIONS DEVELOPERS