Compaq Fortran Installation Guide for
OpenVMS Alpha Systems


Previous Contents


Appendix A
Files Added or Updated During Installation

This appendix lists, for each of the installable kits, the files that are added to or updated on your OpenVMS system during installation. Note that some files may not be installed depending on selected options or your system's configuration or operating system version. In the file names shown, a lowercase "n" indicates a version-dependent digit.

FORTRAN (Fortran Compiler)


[SYSEXE]F90$MAIN.EXE 
[SYSEXE]FORT$MAIN.EXE 
[SYSEXE]FORT$FSPLIT.EXE 
[SYSHLP]HELPLIB.HLB (updated) 
[SYSHLP]FORTRAN.RELEASE_NOTES 
[SYSHLP]FORTRAN_RELEASE_NOTES.PS 
[SYSLIB]DCLTABLES.EXE (updated) 
[SYSLIB]FORT$FORTRAN-F95.CLD 
[SYSLIB]FORT$FORTRAN-F77.CLD 
[SYSLIB]FORSYSDEF,TLB 
[SYSMSG]F90$MSG.EXE 
[SYSMSG]FORT$MSG.EXE 
[SYSMSG]FORT$MSG2.EXE 
[SYS$STARTUP]FORT$STARTUP.COM 
[SYSTEST]FORT$IVP.COM 

FORRTL (Fortran Run-Time Library)


[SYSHLP]FORTRAN.RELEASE_NOTES 
[SYSLIB]FORDEF.FOR 
[SYSLIB]FORIOSDEF.FOR 
[SYSLIB]DEC$FORRTL.EXE 
[SYSLIB]STARLET.OLB (updated) 
[SYSLIB]IMAGELIB.OLB (updated) 
[SYSUPD]FOR$INSTALL_FORRTL.COM 
[SYSTEST]FOR$RTL_IVP.COM 
[SYSTEST]FOR$RTL_IVP.OBJ 

CXML (Extended Math Library)


[SYSHLP]HELPLIB.HLB (updated) 
[SYSHLP]CXML_LAPACK_C.TXT 
[SYSHLP]CXML_LAPACK_D.TXT 
[SYSHLP]CXML_LAPACK_S.TXT 
[SYSHLP]CXML_LAPACK_Z.TXT 
[SYSHLP]CXML-Vnnnn-RELEASE-NOTES.TXT 
[SYSHLP]CXML-Vnnnn-RELEASE-NOTES.PS 
[SYSHLP.EXAMPLES.CXML]READ_ME.INDEX 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_LAPACK_1.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_LAPACK_2.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLES_SIG_PROC.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_ITSOL_1.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_ITSOL_2.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_ITSOL_3.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_ITSOL_4.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_ITSOL_5.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SKYSOL_1.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SKYSOL_2.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SKYSOL_3.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SKYSOL_4.FOR 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_ITSOL_1.C 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_LAPACK_1.C 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SFFT_1D.C 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SFFT_2D.C 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SKYSOL_1.C 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_ITSOL_1.CXX 
[SYSHLP.EXAMPLES.CXML]EXAMPLE_SKYSOL_1.CXX 
[SYSLIB]CXMLDEF.FOR 
[SYSLIB]CXML_DEF.FOR 
[SYSLIB]DXMLDEF.FOR 
[SYSLIB]DXML_DEF.FOR 
[SYSLIB]CXMLDEF.H 
[SYSLIB]CXML_DEF.H 
[SYSLIB]DXMLDEF.H 
[SYSLIB]DXML_DEF.H 
[SYSLIB]CXML_EQUIVALENCE_LAPACK.C 
[SYSLIB]CXML$EMACS.ML 
[SYSLIB]CXML$EVE.TPU 
[SYSLIB]CXML$FGS.OLB 
[SYSLIB]CXML$FGS_BLAS1.EXE 
[SYSLIB]CXML$FGS_BLAS1E.EXE 
[SYSLIB]CXML$FGS_BLAS2.EXE 
[SYSLIB]CXML$FGS_BLAS3.EXE 
[SYSLIB]CXML$FGS_COMMON.EXE 
[SYSLIB]CXML$FGS_LAPACK.EXE 
[SYSLIB]CXML$FGS_SCIPORT.OLB 
[SYSLIB]CXML$FGS_SIG_PROC.EXE 
[SYSLIB]CXML$FGS_SPARSE.EXE 
[SYSLIB]CXML$FGS_VLIB.EXE 
[SYSLIB]CXML$IMAGELIB_GS.OLB 
[SYSLIB]CXML$IMAGELIB_TS.OLB 
[SYSLIB]CXML$SET_LIB.COM 
[SYSLIB]CXML$STS.OLB 
[SYSLIB]CXML$STS_BLAS1.EXE 
[SYSLIB]CXML$STS_BLAS1E.EXE 
[SYSLIB]CXML$STS_BLAS2.EXE 
[SYSLIB]CXML$STS_BLAS3.EXE 
[SYSLIB]CXML$STS_COMMON.EXE 
[SYSLIB]CXML$STS_LAPACK.EXE 
[SYSLIB]CXML$STS_SCIPORT.OLB 
[SYSLIB]CXML$STS_SIG_PROC.EXE 
[SYSLIB]CXML$STS_SPARSE.EXE 
[SYSLIB]CXML$STS_VLIB.EXE 
[SYS$STARTUP]CXML$STARTUP.COM 
[SYSTEST]CXML_IVP.COM 
[SYSTEST.CXML]BLAS_BUILD_TEST.OBJ 
[SYSTEST.CXML]LAPACK_BUILD_TEST.OBJ 
[SYSTEST.CXML]SIG_PROC_BUILD_TEST.OBJ 
[SYSTEST.CXML]SPARSE_BUILD_TEST.OBJ 
[SYSTEST.CXML]VLIB_BUILD_TEST.OBJ 
[SYSTEST.CXML]IVP_LAPACK_VAX.OBJ 
[SYSTEST.CXML]IVP_LAPACK_IEEE.OBJ 
[SYSTEST.CXML]IVP_SIG_VAX.OBJ 
[SYSTEST.CXML]IVP_SIG_IEEE.OBJ 
[SYSTEST.CXML]IVP_SPARSE_B1_VAX.OBJ 
[SYSTEST.CXML]IVP_SPARSE_B1_IEEE.OBJ 
[SYSTEST.CXML]IVP_SPARSE_IS_VAX.OBJ 
[SYSTEST.CXML]IVP_SPARSE_IS_IEEE.OBJ 
[SYSTEST.CXML]IVP_SPARSE_SKY_VAX.OBJ 
[SYSTEST.CXML]IVP_SPARSE_SKY_IEEE.OBJ 
[SYSTEST.CXML]IVP_VLIB_VAX.OBJ 
[SYSTEST.CXML]IVP_VLIB_IEEE.OBJ 
[SYSUPD]CXML$REMOVE_FILES.COM 
ADB (Advanced Debugger)


[DECW$DEFAULTS.SYSTEM]VMSDEBUG_Vnn.DAT 
[SYSEXE]LINKER64.EXE 
[SYSEXE]DBGHK$PRCDUMP_KERNEL_Vnn.COM 
[SYSEXE]DBGHK$PRCDUMP_KERNEL_Vnn.EXE 
[SYSEXE]DBGHK$PRCDUMP_KERNEL_Vnn.MAP 
[SYSEXE]DBGHK$SYSDUMP_KERNEL_Vnn.COM 
[SYSEXE]DBGHK$SYSDUMP_KERNEL_Vnn.EXE 
[SYSEXE]DBGHK$SYSDUMP_KERNEL_Vnn.MAP 
[SYSEXE]DBGHK$HOST_KERNEL_Vnn.COM 
[SYSEXE]DBGHK$HOST_KERNEL_Vnn.EXE 
[SYSEXE]DBGHK$HOST_KERNEL_Vnn.MAP 
[SYSEXE]FORCE_PROCESS_DUMP.EXE 
[SYSHLP]ADBxxx.RELEASE_NOTES 
[SYSHLP]DBG$HELP_Vnn.HLB 
[SYSHLP]DBG$UIHELP_Vnn.HLB 
[SYSLIB]DCLTABLES.EXE (updated) 
[SYSLIB]CS_IN_DEBUG.CLD 
[SYSLIB]CS_OUT_DEBUG.CLD 
[SYSLIB]Vnn_Vnn_ANALYZE.CLD 
[SYSLIB]Vnn_ANALYZE.CLD 
[SYSLIB]DEBUG_Vnn.EXE 
[SYSLIB]DEBUG_Vnn.MAP 
[SYSLIB]DEBUGSHR_Vnn.EXE 
[SYSLIB]DEBUGSHR_Vnn.MAP 
[SYSLIB]TRACE_Vnn.EXE 
[SYSLIB]TRACE_Vnn.MAP 
[SYSLIB]DEBUGSRVSHR_Vnn.EXE 
[SYSLIB]DEBUGSRVSHR_Vnn.MAP 
[SYSLIB]DEBUGUISHR_Vnn.EXE 
[SYSLIB]DEBUGUISHR_Vnn.MAP 
[SYSLIB]VMSDEBUGUIL_Vnn.UID 
[SYSLIB]DBG$HA_Vnn.UID 
[SYSLIB]DBG$HA_KERNEL_Vnn.EXE 
[SYSLIB]DBG$HA_KERNEL_Vnn.MAP 
[SYSLIB]DBG$HA_MAIN_Vnn.EXE 
[SYSLIB]DBG$HA_MAIN_Vnn.MAP 
[SYSLIB]LIBRTL_INSTRUMENTED.EXE 
[SYSLIB]IMGDUMP_Vnn.EXE 
[SYSLIB]IMGDUMP_RIGHTS_Vnn.EXE 
[SYSLIB]SDA$SHARE_Vnn.EXE 
[SYSMSG]DBGTBKMSG_Vnn.EXE 
[SYSMSG]PRGDEVMSG_Vnn.EXE 
[SYSTEST]DBG$IVP.COM 
[SYSTEST]DBG$DW$IVP.COM 
[SYSTEST]IVP_IMAGE.PAS 
[SYSTEST]IVP_IMAGE.EXE 
[SYSTEST]IVP_SCRIPT.TXT 
[SYSTEST]IVP_SCRIPT.OUT_OLD 
[SYSUPD]DBGKITUNINSTAL.COM 
[SYS$STARTUP]DEBUG$SETUP.COM 
[SYS$STARTUP]DEBUG$STARTUP_Vnn.COM 


Appendix B
Installation Messages

This appendix lists the more common diagnostic messages you might see during product installation. If you encounter a message not shown here, use the HELP/MESSAGE command to display information about it. If you add the /LOG qualifier to the PRODUCT INSTALL command, many additional informational messages will be displayed - these can be ignored.


FAILCONF,  failed to resolve conflicting requirements for 'object- 
           type' 'object-name' 
 
 Explanation:  More than one product supplies a managed object of the same 
               name, type, and scope. They cannot coexist because of a 
               conflict in the objects' properties. Files, directories, and 
               library modules are examples of managed objects. 
 
 User Action:  If you are installing the FORRTL kit on OpenVMS 7.1, ignore this 
               message and continue the installation.  Otherwise, report the 
               problem to Compaq. 
 
 
 
INSTALLERR,  error executing DCL INSTALL command 
 
 Explanation:  The POLYCENTER Software Installation utility installs a file 
               as a known image by having the DCL command INSTALL execute in 
               a subprocess. The INSTALL command failed. 
 
 User Action:  Take action based on the accompanying messages. If you specify 
               the /TRACE qualifier when you retry the operation, you can   
               view the command sent to the subprocess. 
 
 
 
IVPFAILURE,  test procedure completed with an error status 
 
 Explanation:  The installation verification test procedure for the product 
               completed with an exit status that indicates a failure. If you 
               were executing a PRODUCT INSTALL command, the product has been 
               completely installed, but its test procedure failed. 
 
 User Action:  Take action based on the accompanying messages. If you specify 
               the /TRACE qualifier when you retry the operation, you can 
               view the commands sent to the subprocess and the output 
               generated when these commands are executed. 
 
 
 
RETAIN,  'object' 'object-name' was not replaced because 'object' 
          from kit does not have higher generation number 
 
 Explanation:  During installation of a software product (or a patch to 
               a software product), the specified object (either a file 
               or a library module) was not copied from the kit to the 
               destination disk. The installation utility found an object 
               with the same name already installed on the destination disk 
               and that object's generation (sequencing) number was the same 
               or greater than the generation number of the object from the 
               kit. Therefore, the object with the latest generation number 
               (the previously installed item) was left on your destination 
               disk. 
 
               This condition typically occurs when you install multiple 
               patches or updates to the same product. The installation 
               utility performs conflict detection and resolution so that 
               your system will always retain the most current files even if 
               updates are not installed in chronological order. 
 
 User Action:  None. 

Contents