| Previous | Contents | Index |
The following sections contain sample logs of DCE configurations.
C.1 Initial Client Configuration
$ @SYS$MANAGER:DCE$SETUP
DCE System Management Main Menu
DCE for OpenVMS VAX V1.5
1) Configure Configure DCE services on this system
2) Show Show DCE configuration and active daemons
3) Stop Terminate all active DCE daemons
4) Start Start all DCE daemons
5) Restart Terminate and restart all DCE daemons
6) Clean Terminate all active DCE daemons and remove
all temporary local DCE databases
7) Clobber Terminate all active DCE daemons and remove
all permanent local DCE databases
8) Test Run Configuration Verification Program
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection: 1
DCE Configuration Menu
1) RPC_Only Provide DCE RPC services only
2) Client Configure this host as a DCE client system
3) Server Configure this host as a full DCE server system
4) Custom Define a customized DCE configuration for this host
5) IntLogin Enable or disable DCE integrated login support
6) Rebuild Rebuild DCE on this host using the current
configuration
7) Add_SecRep Add a Security Replica to the configuration on this host
8) Add_CdsRep Add a CDS Replica clearinghouse to the configuration
on this host
0) Exit Return to previous menu
?) Help Display helpful information
Please enter your selection: 2
Starting DCE client configuration . . .
This system has no current DCE configuration.
Based on this configuration, there should be no active DCE daemons.
At each prompt, enter your response. You may enter <RETURN> for
the default response, displayed in [brackets], or '?' for help.
Entering a CONTROL-Z will terminate this configuration request.
Press <RETURN> to continue . . .
Removing temporary local DCE databases . . .
Removing permanent local DCE databases . . .
Starting Remote Procedure Call Services daemon (DCE$RPCD) . . .
%RUN-S-PROC_ID, identification of created process is 00000EED
Please enter the DCE hostname for this system [excess]:
Do you wish to search the LAN for known DCE cells (YES/NO/?) [Y]?
Searching, please wait . . .
The following cells were discovered within broadcast range of this system:
opnfst_cell.dce.zko.dec.com
opndce_cell.dce.zko.dec.com
openup_cell.dce.zko.dec.com
reaper_cell.dce.zko.dec.com
Please enter the name for your DCE cell [opnfst_cell.dce.zko.dec.com]:
reaper_cell.dce.zko.dec.com
Hostname: excess
Cellname: reaper_cell.dce.zko.dec.com
Do you want to save these names for your DCE configuration (YES/NO/?) [Y]?
Please enter the hostname of the DCE security registry [reaper]:
Checking TCP/IP local host database for address of "reaper".
Please wait . . .
Checking BIND servers for address of "reaper". Please wait . . .
Please enter the principal name to be used [cell_admin]:
Please enter the password for principal "cell_admin" (or ? for help):
Some form of synchronized time is required for proper DCE security
operation...
Do you want to enable DCE DTS (YES/NO/?) [Y]?
Do you want to accept time from DECnet/DTSS servers (YES/NO/?) [N]?
Do you want this host to be a DCE DTS Server (YES/NO/?) [N]?
Do you want to enable DCE integrated login support (YES/NO/?) [N]?
Remote Procedure Call Services Enabled
Security Services Client Enabled
CDS Name Service Client Enabled
PC Name Service Interface Disabled
Distributed Time Service Clerk Enabled
Accept DECnet time (DTSS) sources Disabled
Integrated login Disabled
Do you want to save this service configuration (YES/NO/?) [Y]?
Establishing security environment for principal "cell_admin" . . .
Starting Security Service Client daemon (DCE$SEC_CLIENTD) . . .
%RUN-S-PROC_ID, identification of created process is 00000DAE
Testing access to the security registry . . .
Initializing CDS...
Starting CDS Name Service Advertiser daemon (DCE$CDSADV) . . .
%RUN-S-PROC_ID, identification of created process is 00000EEF
Starting CDS Name Service Client daemon (DCE$CDSCLERK) . . .
%RUN-S-PROC_ID, identification of created process is 00000EC2
Configuring client host objects in the cell namespace . . .
Setting up required objects in namespace directory "/.:/hosts/excess" . . .
Testing for multi-LAN cell . . .
This cell has been configured to span multiple LAN's.
The known LAN's are:
43.7.12
Please enter the name of the LAN for this host [43.7.12]: 27.0.66
The requested LAN has not yet been defined in the namespace.
Do you want to define it (YES/NO/?) [Y]?
Creating namespace directories and objects . . .
Configuring required RPC information . . .
Modifying ACL's on namespace objects . . .
/.:/hosts/excess
/.:/hosts/excess/self
/.:/hosts/excess/cds-clerk
/.:/hosts/excess/profile
/.:/lan-27.0.66-profile
Starting Distributed Time Service daemon (DCE$DTSD) . . .
%RUN-S-PROC_ID, identification of created process is 00000EC3
Press <RETURN> to continue . . .
|
$ @SYS$MANAGER:DCE$SETUP
DCE System Management Main Menu
DCE for OpenVMS VAX V1.5
1) Configure Configure DCE services on this system
2) Show Show DCE configuration and active daemons
3) Stop Terminate all active DCE daemons
4) Start Start all DCE daemons
5) Restart Terminate and restart all DCE daemons
6) Clean Terminate all active DCE daemons and remove
all temporary local DCE databases
7) Clobber Terminate all active DCE daemons and remove
all permanent local DCE databases
8) Test Run Configuration Verification Program
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection: 1
DCE Configuration Menu
1) RPC_Only Provide DCE RPC services only
2) Client Configure this host as a DCE client system
3) Server Configure this host as a full DCE server system
4) Custom Define a customized DCE configuration for this host
5) IntLogin Enable or disable DCE integrated login support
6) Rebuild Rebuild DCE on this host using the current
configuration
7) Add_SecRep Add a Security Replica to the configuration on this host
8) Add_CdsRep Add a CDS Replica clearinghouse to the configuration
on this host
0) Exit Return to previous menu
?) Help Display helpful information
Please enter your selection: 3
Starting DCE server configuration . . .
This system has no current DCE configuration.
Based on this configuration, there should be no active DCE daemons.
At each prompt, enter your response. You may enter <RETURN> for
the default response, displayed in [brackets], or '?' for help.
Entering a CONTROL-Z will terminate this configuration request.
Press <RETURN> to continue . . .
Removing temporary local DCE databases . . .
Removing permanent local DCE databases . . .
Starting Remote Procedure Call Services daemon (DCE$RPCD) . . .
%RUN-S-PROC_ID, identification of created process is 00000405
Please enter the DCE hostname for this system [reaper]:
Do you wish to search the LAN for known DCE cells (YES/NO/?) [Y]? n
Please enter the name for your DCE cell [reaper_cell]:
reaper_cell.dce.zko.dec.com
Hostname: reaper
Cellname: reaper_cell.dce.zko.dec.com
Do you want to save these names for your DCE configuration (YES/NO/?) [Y]?
Please enter the principal name to be used [cell_admin]:
Please enter the password for principal "cell_admin" (or ? for help):
Please enter the password again to confirm it:
Does this cell use multiple LANs (YES/NO/?) [N]? ?
This cell uses multiple LANs if clients and servers are divided
into profile groups to facilitate performance. (Most cells will not
require this feature.)
Does this cell use multiple LANs (YES/NO/?) [N]? y
Checking TCP/IP local host database for address of "reaper".
Please wait . . .
Please enter the name of your LAN [43.7.12]:
Do you want to disble DECnet/DTSS, and use DCE DTS instead? (YES/NO/?) [Y]?
Do you want to accept time from DECnet/DTSS servers? (YES/NO/?) [N]?
Do you want to enable DCE integrated login support (YES/NO/?) [N]?
Remote Procedure Call Services Enabled
Security Services Server Enabled
CDS Name Service Master Server Enabled
Global Directory Agent Disabled
PC Name Service Interface Enabled
Distributed Time Service Server Enabled
Integrated login Disabled
Do you want to save this service configuration (YES/NO/?) [Y]?
Building security registry database . . .
Starting Security Service Server daemon (DCE$SECD) . . .
%RUN-S-PROC_ID, identification of created process is 00000412
Logging in to DCE using principal "cell_admin" . . .
Password must be changed!
Setting up security registry for cell_admin account . . .
Logging in to DCE using principal "cell_admin" . . .
Password must be changed!
Starting Security Service Client daemon (DCE$SEC_CLIENTD) . . .
%RUN-S-PROC_ID, identification of created process is 00000413
Testing access to the security registry . . .
Establishing security environment for principal "cell_admin" . . .
Setting up security registry for DTS Server . . .
Initializing CDS...
Starting CDS Name Service Advertiser daemon (DCE$CDSADV) . . .
%RUN-S-PROC_ID, identification of created process is 00000416
Starting CDS Name Service Client daemon (DCE$CDSCLERK) . . .
%RUN-S-PROC_ID, identification of created process is 00000417
Starting CDS Name Service Server daemon (DCE$CDSD) . . .
%RUN-S-PROC_ID, identification of created process is 00000419
Initializing the cell namespace . . .
Modifying ACL's on "/.:" . . .
Creating namespace directories and objects . . .
Configuring required RPC information . . .
Modifying ACL's on namespace objects . . .
/.:/cell-profile
/.:/hosts
/.:/hosts/reaper
/.:/hosts/reaper/self
/.:/hosts/reaper/cds-clerk
/.:/hosts/reaper/cds-server
/.:/hosts/reaper/profile
/.:/sec
/.:/sec-v1
/.:/subsys/dce/sec
/.:/reaper_ch
/.:/lan-profile
/.:/lan-43.7.12-profile
principal
principal/krbtgt
principal/krbtgt/reaper_cell.dce.zko.dec.com
principal/dce-ptgt
principal/dce-rgy
principal/hosts
principal/hosts/reaper
principal/hosts/reaper/self
principal/hosts/reaper/cds-server
principal/hosts/reaper/gda
group
group/acct-admin
group/subsys
group/subsys/dce
group/subsys/dce/sec-admin
group/subsys/dce/dts-admin
group/subsys/dce/dts-servers
group/subsys/dce/dfs-admin
group/subsys/dce/dfs-fs-servers
group/subsys/dce/dfs-bak-servers
group/subsys/dce/cds-admin
group/subsys/dce/cds-server
org
policy
principal/nobody
principal/root
principal/daemon
principal/sys
principal/bin
principal/uucp
principal/who
principal/mail
principal/tcb
principal/dce-ptgt
principal/dce-rgy
group/none
group/system
group/daemon
group/uucp
group/bin
group/kmem
group/mail
group/tty
group/tcb
org/none
/.:/fs
/.:/subsys/dce/dfs
/.:/subsys/dce/dfs/bak
/.:/subsys/DEC/pc
/.:/subsys/DEC/examples
Setting up security registry for DTS Server . . .
Starting Security Service Client daemon (DCE$SEC_CLIENTD) . . .
%RUN-S-PROC_ID, identification of created process is 0000041B
Testing access to the security registry . . .
Starting Distributed Time Service daemon (DCE$DTSD) . . .
%RUN-S-PROC_ID, identification of created process is 0000041C
Starting PC Name Service Interface daemon (DCE$NSID) . . .
%RUN-S-PROC_ID, identification of created process is 000002E7
Press <RETURN> to continue . . .
|
$ @SYS$MANAGER:DCE$SETUP
*** System Management Procedure, DCE V1.5 for OpenVMS Alpha ***
DCE System Management Main Menu
DCE V1.5 for OpenVMS Alpha
1) Configure Configure DCE services on this system
2) Show Show DCE configuration and active daemons
3) Stop Terminate all active DCE daemons
4) Start Start all DCE daemons
5) Restart Terminate and restart all DCE daemons
6) Clean Terminate all active DCE daemons and remove
all temporary local DCE databases
7) Clobber Terminate all active DCE daemons and remove
all permanent local DCE databases
8) Test Run Configuration Verification Program
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection: 2
This system has the following DCE configuration:
Hostname: reaper
Cellname: excess_cell.zko.dec.com
Remote Procedure Call Services Enabled
Security Services Replica Enabled
Security Replica Name reaper_rep
CDS Name Service Replica Server Enabled
Replica Clearinghouse Name reaper_ch
Global Directory Agent Disabled
PC Name Service Interface Disabled
Distributed Time Service Local Server Enabled
Accept DECnet time (DTSS) sources Disabled
Integrated login Disabled
This system supports the following network transport protocols:
TCP/IP: [ncacn_ip_tcp]
UDP/IP: [ncadg_ip_udp]
DECnet: [ncacn_dnet_nsp]
TCP/IP services on this system are provided by: UCX
TCP/IP Services for OpenVMS
The current cell is: opnsea_cell
Based on this configuration, the following DCE daemons should be
active:
Daemon Process Name Process ID
Remote Procedure Call Services DCE$RPCD 000003ED
Security Service Client DCE$SEC_CLIENTD 00000403
Security Service Server DCE$SECD 00000402
CDS Name Service Advertiser DCE$CDSADV 000003AF
CDS Name Service Client DCE$CDSCLERK 000003B0
CDS Name Service Server DCE$CDSD 000003B1
Distributed Time Service DCE$DTSD 00000445
Press <RETURN> to continue . . .
DCE System Management Main Menu
DCE V1.5 for OpenVMS Alpha
1) Configure Configure DCE services on this system
2) Show Show DCE configuration and active daemons
3) Stop Terminate all active DCE daemons
4) Start Start all DCE daemons
5) Restart Terminate and restart all DCE daemons
6) Clean Terminate all active DCE daemons and remove
all temporary local DCE databases
7) Clobber Terminate all active DCE daemons and remove
all permanent local DCE databases
8) Test Run Configuration Verification Program
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection: 0
*** DCE System Management Procedure Complete ***
|
$ @SYS$MANAGER:DCE$SETUP.COM
DCE System Management Main Menu
DCE for OpenVMS VAX V1.5
1) Configure Configure DCE services on this system
2) Show Show DCE configuration and active daemons
3) Stop Terminate all active DCE daemons
4) Start Start all DCE daemons
5) Restart Terminate and restart all DCE daemons
6) Clean Terminate all active DCE daemons and remove
all temporary local DCE databases
7) Clobber Terminate all active DCE daemons and remove
all permanent local DCE databases
8) Test Run Configuration Verification Program
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection: 1
DCE Configuration Menu
1) RPC_Only Provide DCE RPC services only
2) Client Configure this host as a DCE client system
3) Server Configure this host as a full DCE server system
4) Custom Define a customized DCE configuration for this host
5) IntLogin Enable or disable DCE integrated login support
6) Rebuild Rebuild DCE on this host using the current
configuration
7) Add_SecRep Add a Security Replica to the configuration on this host
8) Add_CdsRep Add a CDS Replica clearinghouse to the configuration
on this host
0) Exit Return to previous menu
?) Help Display helpful information
Please enter your selection: 4
Starting DCE custom configuration . . .
This system has no current DCE configuration.
Based on this configuration, there should be no active DCE daemons.
At each prompt, enter your response. You may enter <RETURN> for
the default response, displayed in [brackets], or '?' for help.
Entering a CONTROL-Z will terminate this configuration request.
Press <RETURN> to continue . . .
Starting Remote Procedure Call Services daemon (DCE$RPCD) . . .
%RUN-S-PROC_ID, identification of created process is 000003ED
Please enter the DCE hostname for this system [reaper]:
Do you wish to search the LAN for known DCE cells (YES/NO/?) [Y]?
Searching, please wait . . .
The following cells were discovered within broadcast range of this system:
opndce_cell.dce.zko.dec.com
openup_cell.dce.zko.dec.com
excess_cell.dce.zko.dec.com
Please enter the name for your DCE cell [opndce_cell.dce.zko.dec.com]:
excess_cell.dce.zko.dec.com
**************************** WARNING ****************************
*** If you are configuring this host to be a CDS Master Server, this
*** cellname should not appear in the list of known cells.
Are you sure you want to use cellname EXCESS_CELL.DCE.ZKO.DEC.COM
(YES/NO/?) [Y]? y
Hostname: reaper
Cellname: excess_cell.dce.zko.dec.com
Do you want to save these names for your DCE
configuration (YES/NO/?) [Y]?
Do you wish to configure reaper as the Security Master
server (YES/NO/?) [N]?
Do you wish to configure reaper as a Security Replica
server (YES/NO/?) [N]? y
Please enter a unique name for this security replica
(without prefixing subsys/dce/sec/ ) [reaper_rep]:
Please enter the hostname of the DCE security registry [excess]:
Checking TCP/IP local host database for address of "excess".
Please wait . . .
Please enter the principal name to be used [cell_admin]:
Please enter the password for principal "cell_admin" (or ? for help):
Do you wish to configure reaper as the CDS Master server
for the cell (YES/NO/?) [N]?
Do you wish to configure reaper as a CDS Replica server (YES/NO/?) [N]? y
Specify a name for this Replica clearinghouse that differs from the
CDS Master Server clearinghouse name of: excess_ch
Please enter the name for this clearinghouse? [reaper_ch]:
Do you want to enable DCE DTS (YES/NO/?) [N]? y
Do you want this host to be a DCE DTS Local Server (YES/NO/?) [N]? y
Do you want to configure the NSI Agent (YES/NO/?) [N]?
Do you want to enable DCE integrated login support (YES/NO/?) [N]?
Remote Procedure Call Services Enabled
Security Services Replica Enabled
Security Replica Name reaper_rep
CDS Name Service Replica Server Enabled
Replica Clearinghouse Name reaper_ch
Global Directory Agent Disabled
PC Name Service Interface Disabled
Distributed Time Service Server Enabled
Integrated login Disabled
Do you want to save this service configuration (YES/NO/?) [Y]?
Removing temporary local DCE databases . . .
Removing permanent local DCE databases . . .
Establishing security environment for principal "cell_admin" . . .
Setting up security registry for DTS Server . . .
Starting Security Service Client daemon (DCE$SEC_CLIENTD) . . .
%RUN-S-PROC_ID, identification of created process is 000003EE
Testing access to the security registry . . .
Initializing CDS...
Starting CDS Name Service Advertiser daemon (DCE$CDSADV) . . .
%RUN-S-PROC_ID, identification of created process is 000003AF
Starting CDS Name Service Client daemon (DCE$CDSCLERK) . . .
%RUN-S-PROC_ID, identification of created process is 000003B0
Starting CDS Name Service Server daemon (DCE$CDSD) . . .
%RUN-S-PROC_ID, identification of created process is 000003B1
Creating Clearinghouse "/.:/reaper_ch"
Enter the name of a CDS directory existing in the master CDS
namespace that you would like to replicate on this system.
Do not include the /.:/ prefix to the directory name --
This will be done for you."
*** When you are done, press only the <RETURN> key ***
Enter the name of a CDS directory to be replicated
(or ? for help):subsys/dce
Enter the name of a CDS directory to be replicated
(or ? for help):
Configuring client host objects in the cell namespace . . .
Setting up required objects in namespace
directory "/.:/hosts/reaper" . . .
Testing for multi-LAN cell . . .
Creating namespace directories and objects . . .
Configuring required RPC information . . .
Modifying ACL's on namespace objects . . .
/.:/hosts/reaper
/.:/hosts/reaper/self
/.:/hosts/reaper/cds-clerk
/.:/hosts/reaper/cds-server
/.:/hosts/reaper/profile
Logging in to DCE using principal "cell_admin" . . .
Password must be changed!
Modifying ACLS on /.:/replist
/.:/subsys/dce/sec
/.:/sec
Building security registry replica database . . .
Starting Security Service Server daemon (DCE$SECD) . . .
%RUN-S-PROC_ID, identification of created process is 00000402
Logging in to DCE using principal "cell_admin" . . .
Password must be changed!
Setting up security registry for DTS Server . . .
Terminating Security Service Client daemon (DCE$SEC_CLIENTD) . . .
Starting Security Service Client daemon (DCE$SEC_CLIENTD) . . .
%RUN-S-PROC_ID, identification of created process is 00000403
Testing access to the security registry . . .
Starting Distributed Time Service daemon (DCE$DTSD) . . .
%RUN-S-PROC_ID, identification of created process is 00000445
|
$ @SYS$MANAGER:DCE$SETUP.COM
DCE System Management Main Menu
DCE for OpenVMS VAX V1.5
1) Configure Configure DCE services on this system
2) Show Show DCE configuration and active daemons
3) Stop Terminate all active DCE daemons
4) Start Start all DCE daemons
5) Restart Terminate and restart all DCE daemons
6) Clean Terminate all active DCE daemons and remove
all temporary local DCE databases
7) Clobber Terminate all active DCE daemons and remove
all permanent local DCE databases
8) Test Run Configuration Verification Program
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection: 1
DCE Configuration Menu
1) RPC_Only Provide DCE RPC services only
2) Client Configure this host as a DCE client system
3) Server Configure this host as a full DCE server system
4) Custom Define a customized DCE configuration
for this host
5) IntLogin Enable or disable DCE integrated login support
6) Rebuild Rebuild DCE on this host using the current
configuration
7) Add_SecRep Add a Security Replica to the configuration on this host
8) Add_CdsRep Add a CDS Replica clearinghouse to the configuration
on this host
0) Exit Return to previous menu
?) Help Display helpful information
Please enter your selection: 7
Testing access to the security registry . . .
Please enter a unique name for this security replica
(without prefixing subsys/dce/sec/ ) [reaper_rep]:
Logging in to DCE using principal "cell_admin" . . .
Modifying ACLS on /.:/replist
/.:/subsys/dce/sec
/.:/sec
Building security registry replica database . . .
Starting Security Service Server daemon (DCE$SECD) . . .
%RUN-S-PROC_ID, identification of created process is 00000B31
Press <RETURN> to continue . . .
DCE Configuration Menu
1) RPC_Only Provide DCE RPC services only
2) Client Configure this host as a DCE client system
3) Server Configure this host as a full DCE server system
4) Custom Define a customized DCE configuration for this host
5) IntLogin Enable or disable DCE integrated login support
6) Rebuild Rebuild DCE on this host using the current
configuration
7) Del_SecRep Delete the Security Replica from this host
8) Del_CdsRep Delete the Cds Replica clearinghouse from this host
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection: 7
Please confirm the deletion of the security replica (YES/NO/?) [N]? y
Logging in to DCE using principal "cell_admin" . . .
Deleting security replica subsys/dce/sec/reaper_rep
Terminating Security Service Server daemon (DCE$SECD) . . .
Press <RETURN> to continue . . .
DCE Configuration Menu
1) RPC_Only Provide DCE RPC services only
2) Client Configure this host as a DCE client system
3) Server Configure this host as a full DCE server system
4) Custom Define a customized DCE configuration for this host
5) IntLogin Enable or disable DCE integrated login support
6) Rebuild Rebuild DCE on this host using the current configuration
7) Add_SecRep Add a Security Replica to the configuration on this host
8) Del_CdsRep Delete the Cds Replica clearinghouse from this host
0) Exit Exit this procedure
?) Help Display helpful information
Please enter your selection:0
*** DCE System Management Procedure Complete ***
|
| Index | Contents |