DECdfs for OpenVMS Installation Guide


Previous Contents Index


Appendix B
Sample Installations for OpenVMS Systems

This appendix shows sample installations of DECdfs client and server software on the following systems:

B.1 Client-Only Installation on OpenVMS VAX Version 5.5-2 with DECnet-VAX

The following sample dialogue shows a typical installation of DECdfs client software on OpenVMS VAX Version 5.5-2 with DECnet-VAX.


$ @sys$update:vmsinstal 
 
 
        VAX/VMS Software Product Installation Procedure V5.5-2 
 
 
It is 27-OCT-1998 at 11:23. 
 
Enter a question mark (?) at any time for help. 
 
* Are you satisfied with the backup of your system disk [YES]? 
* Where will the distribution volumes be mounted: dua0:[kit] 
 
Enter the products to be processed from the first distribution volume set. 
* Products: DECDFS023 
* Enter installation options you wish to use (none): 
 
The following products will be processed: 
 
  DECDFS V2.3 
 
 
        Beginning installation of DECDFS V2.3 at 11:24 
 
%VMSINSTAL-I-RESTORE, Restoring product save set A ... 
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. 
* Do you want to run the IVP after the installation [YES]? 
* Do you want to purge files replaced by this installation [YES]? 
 
 Current configuration:    OpenVMS VAX V5.5-2 - DECnet Phase IV 
 
* Install the DFS files that support this configuration? [YES]? 
* Do you want to install the DECDFS V2.3 SERVER software on this node [YES]? 
 no 
 
 
        Product:      DFS-CLIENT 
        Producer:     DEC 
        Version:      2.0 
        Release Date: 20-JUN-1994 
 
 
* Does this product have an authorization key registered and loaded? yes 
 
         Installation will be complete in approximately 1 - 5 minutes 
         depending upon your configuration. 
 
         There are no more questions unless you chose to run the IVP. 
         Installing DECdfs software . . . 
 
%VMSINSTAL-I-RESTORE, Restoring product save set B ... 
 
        The following line should be added to your SYSTARTUP command 
        file to automatically start DFS at system startup time: 
                 "@SYS$STARTUP:DFS$STARTUP.COM" 
 
        Put DFS$STARTUP after the statement that invokes the DECnet 
        start-up command file (STARTNET.COM). The DECnet software 
        must be started before the DECdfs software. 
 
 
        Before starting DECdfs . . . 
 
        * You must execute SYS$STARTUP:DNS$CHANGE_DEF_FILE.COM. 
 
 
        Since DECdfs is not being started, we cannot 
        run the Installation Verification Procedure (IVP). 
        A copy of DFS$IVP.COM is in the SYS$TEST directory, 
        so you can run the IVP after you start DECdfs. 
 
 
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... 
 
        Installation of DECDFS V2.3 completed at 11:28 
 
Enter the products to be processed from the next distribution volume set. 
* Products:  Exit 
 
        VMSINSTAL procedure done at 11:28 
 
 
$ @SYS$STARTUP:DNS$CHANGE_DEF_FILE.COM 
Name of DNS server node? MURZIM 
%COPY-S-COPIED, MURZIM::SYS$SYSROOT:[SYSLIB]DNS$NS_DEF_FILE.DAT;3 copied to SYS$ 
COMMON:[SYSEXE]DNS$DEFAULT_FILE.DAT;1 (1 block) 
%SYSTEM-W-NONEXPR, nonexistent process 
%INSTALL-W-FAIL, failed to REMOVE entry for DISK$VAXVMSV055:<SYS0.SYSCOMMON.SYSL 
IB>DNS$CLIENT.EXE 
-INSTALL-E-NOKFEFND, Known File Entry not found 
%INSTALL-W-FAIL, failed to REMOVE entry for DISK$VAXVMSV055:<SYS0.SYSCOMMON.SYSL 
IB>DNS$RTL.EXE 
-INSTALL-E-NOKFEFND, Known File Entry not found 
%RUN-S-PROC_ID, identification of created process is 00000052 
$ 
$ 
$ @SYS$STARTUP:DFS$STARTUP 
% DECdfs starting up... 
% DECdfs startup completed. 
$ 
$ 
$ @SYS$TEST:DFS$IVP 
 
 
 
   ************************************************************************** 
   ***                                                                    *** 
   ***                             DECdfs V2.3                            *** 
   ***                                                                    *** 
   ***                     Distributed  File  Service                     *** 
   ***                                                                    *** 
   ***                  Installation Verification Procedure               *** 
   ***                                                                    *** 
   ************************************************************************** 
 
 
                COPYRIGHT (C) 1987, 1988, 1989, 1992, 1994, 1998 
                    DIGITAL EQUIPMENT CORPORATION, MAYNARD 
                     MASSACHUSETTS.  ALL RIGHTS RESERVED. 
     THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED 
     ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION 
     OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY OTHER COPIES 
     THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER 
     PERSON.  NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED. 
 
     THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND 
     SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION. 
 
     DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS 
     SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL. 
 
 
  This system will run as a DECdfs Client. To verify the installation, 
  you must supply the name of an access point now being served by a 
  DFS server node.  This node and username should have proxy access 
  to the file service named by the access point. 
 
 * Enter an Access Point name [] ? DFSTEST:.MURZIM_SYS 
 
 * Enter the node which serves this access point [] : MURZIM 
$ DFSCP MOUNT DFSTEST:.MURZIM_SYS DFS$IVP_DISK 
%MOUNT-I-MOUNTED, DFSTEST:.MURZIM_SYS mounted on _DFSC1001: 
 
    If available, enter the specification for an accessible directory within 
    the filesystem identified by this access point, e.g. [JONES].  A read 
    access on the directory will be tested.  If a valid proxy does not 
    exist on the server for this node and user, a protection violation will 
    be reported, but that will not terminate the IVP. If you enter a null 
    specification, the read access will not be attempted. 
 
 * Enter directory specification: [000000] 
 
Directory DFS$IVP_DISK:[000000] 
 
000000.DIR;1        BACKUP.SYS;1        BADBLK.SYS;1        BADLOG.SYS;1        
BITMAP.SYS;1        CONTIN.SYS;1        CORIMG.SYS;1        DFSTEST.DIR;1 
DNS$SERVER.DIR;1    INDEXF.SYS;1        SECURITY.SYS;1      SYS0.DIR;1          
SYSEXE.DIR;1        UCX$FTP.DIR;1       UCX$REXEC.DIR;1     UCX$RSH.DIR;1       
USER.DIR;1          VMS$COMMON.DIR;1    VOLSET.SYS;1 
 
Total of 31 files. 
% Directory access was successful. 
$ DFSCP DISMOUNT DFS$IVP_DISK 
%DFS-S-DISMNT_SUCCESS, Dismount was successfully performed 
 
******************************************************************************** 
                             DECdfs V2.3 IVP Successful 
******************************************************************************** 
 
$ 

B.2 Server Installation on OpenVMS Alpha Version 7.1-1H1 with DECnet-Plus

The following sample dialogue shows a typical installation of DECdfs server software on OpenVMS Alpha Version 7.1-1H1 with DECnet-Plus.


$ @sys$update:vmsinstal.com 
 
 
        OpenVMS AXP Software Product Installation Procedure V7.1-1H2 
 
 
It is 29-OCT-1998 at 08:47. 
 
Enter a question mark (?) at any time for help. 
 
* Are you satisfied with the backup of your system disk [YES]? 
* Where will the distribution volumes be mounted: dka0:[kit] 
 
Enter the products to be processed from the first distribution volume set. 
* Products: DECDFS023 
* Enter installation options you wish to use (none): 
 
The following products will be processed: 
 
  DECDFS V2.3 
 
 
        Beginning installation of DECDFS V2.3 at 08:47 
 
%VMSINSTAL-I-RESTORE, Restoring product save set A ... 
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. 
* Do you want to run the IVP after the installation [YES]? 
* Do you want to purge files replaced by this installation [YES]? 
 
 Current configuration:    OpenVMS Alpha V7.1-1H2 - DECnet-Plus 
 
* Install the DFS files that support this configuration? [YES]? 
* Install DFS Help Message file [YES]? 
 
    Add SYS$HELP:DFS.MSGHLP$DATA to the searchlist defined by 
    MSGHLP$LIBRARY in order to include the DFS messages in your 
    HELP/MESSAGE search. Please refer to the OpenVMS SYSTEM 
    MANAGER'S MANUAL: ESSENTIALS for more information. 
 
* Do you want to install the DECDFS V2.3 SERVER software on this node [YES]? 
 
        Product:      DFS 
        Producer:     DEC 
        Version:      2.0 
        Release Date: 20-JUN-1994 
 
* Does this product have an authorization key registered and loaded? YES 
 
         Installation will be complete in approximately 1 - 5 minutes 
         depending upon your configuration. 
 
         There are no more questions unless you chose to run the IVP. 
         Installing DECdfs software . . . 
 
%VMSINSTAL-I-RESTORE, Restoring product save set G ... 
 
        The following line should be added to your SYSTARTUP command 
        file to automatically start DFS at system startup time: 
                 "@SYS$STARTUP:DFS$STARTUP.COM" 
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... 
% DECdfs starting up... 
 
Node 0 Session Control Application DFS$COM_ACP 
at 1998-10-29-08:49:09.654-07:00I9.254 
 
Characteristics 
 
    Node Synonym                      = True 
 
% DECdfs startup completed. 
 
    The Installation Verification Procedure will now be run.  Please 
    review preceeding messages and take note of post-installation actions 
    that may be required (such as editing the SYSTARTUP procedure). 
 
Begin the DECdfs IVP? [YES] 
 
   ************************************************************************** 
   ***                                                                    *** 
   ***                             DECdfs V2.3                            *** 
   ***                                                                    *** 
   ***                     Distributed  File  Service                     *** 
   ***                                                                    *** 
   ***                  Installation Verification Procedure               *** 
   ***                                                                    *** 
   ************************************************************************** 
 
                COPYRIGHT (C) 1987, 1988, 1989, 1992, 1994, 1998 
                    DIGITAL EQUIPMENT CORPORATION, MAYNARD 
                     MASSACHUSETTS.  ALL RIGHTS RESERVED. 
     THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED 
     ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION 
     OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY OTHER COPIES 
     THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER 
     PERSON.  NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED. 
 
     THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND 
     SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION. 
 
     DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS 
     SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL. 
 
   This system will run as a DECdfs Server. To verify the 
   installation, an Access Point must be ADDed on the Server. 
   This procedure creates an Access Point for its own use. You must 
   supply a name for this Access Point that does not already exist 
   and is consistent with the DECdns naming policy used in your network. 
 
 * Enter an Access Point name [] ? DFSTEST:.IVP_TEST 
 
$ DFSCP ADD ACCESS_POINT DFSTEST:.IVP_TEST SYS$SYSDEVICE:[000000] 
$ DFSCP MOUNT DFSTEST:.IVP_TEST DFS$IVP_DISK 
%MOUNT-I-MOUNTED, DFSTEST:.IVP_TEST mounted on _DFSC1001: 
 
Directory DFS$IVP_DISK:[000000] 
 
000000.DIR;1        BACKUP.SYS;1        BADBLK.SYS;1        BADLOG.SYS;1 
BITMAP.SYS;1        CONTIN.SYS;1        CORIMG.SYS;1        DFSTEST.DIR;1 
INDEXF.SYS;1        KIT.DIR;1           SECURITY.SYS;1      SYS0.DIR;1 
VMS$COMMON.DIR;1    VOLSET.SYS;1 
 
Total of 16 files. 
% Directory access was successful. 
$ DFSCP DISMOUNT DFS$IVP_DISK 
%DFS-S-DISMNT_SUCCESS, Dismount was successfully performed 
$ DFSCP REMOVE ACCESS_POINT DFSTEST:.IVP_TEST 
 
******************************************************************************** 
                             DECdfs V2.3 IVP Successful 
******************************************************************************** 
 
        Installation of DECDFS V2.3 completed at 08:49 
 
    Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY 
 
    Creating installation data file: VMI$ROOT:[SYSUPD]DECDFS023.VMI_DATA 
 
Enter the products to be processed from the next distribution volume set. 
* Products:  Exit 
 
        VMSINSTAL procedure done at 08:50 


Index Contents