OpenVMS System Management Utilities Reference Manual

Document revision date: 19 July 1999

OpenVMS System Management Utilities Reference Manual

Contents

Index

By default, a user has full access every day. See the DCL command SET DAY in the OpenVMS DCL Dictionary for information about overriding the defaults for primary and secondary day types.

All the list elements are optional. Unless you specify hours for a day type, access is permitted for the entire day. By specifying an access time, you prevent access at all other times. Adding NO to the qualifier denies the user access to the system for the specified period of time. See the following examples.

/ACCESS Allows unrestricted access

/NOACCESS=SECONDARY Allows access on primary days only

/ACCESS=(9-17) Allows access from 9 A.M. to 5:59 P.M. on all days

/NOACCESS=(PRIMARY, 9-17, SECONDARY, 18-8) Disallows access between 9 A.M. to 5:59 P.M. on primary days but allows access during these hours on secondary days

To specify access hours for specific types of access, see the /BATCH, /DIALUP, /INTERACTIVE, /LOCAL, /NETWORK, and /REMOTE qualifiers.

/ACCOUNT=account-name

Specifies the default name for the account (for example, a billing name or number). The name can be a string of 1 to 8 alphanumeric characters. By default, AUTHORIZE does not assign an account name.

/ADD_IDENTIFIER (default)

/NOADD_IDENTIFIER

Adds a user (user name and account name) to the rights database. The /NOADD_IDENTIFIER does not create a rights list identifier (user name and account name).

/ALGORITHM=keyword=type [=value]

Sets the password encryption algorithm for a user. The keyword VMS refers to the algorithm used in the operating system version that is running on your system, whereas a customer algorithm is one that is added through the $HASH_PASSWORD system service by a customer site, by a layered product, or by a third party. The customer algorithm is identified in $HASH_PASSWORD by an integer in the range of 128 to 255. It must correspond with the number used in the AUTHORIZE command MODIFY/ALGORITHM. By default, passwords are encrypted with the VMS algorithm for the current version of the operating system.

Keyword	Function
BOTH	Set the algorithm for primary and secondary passwords.
CURRENT	Set the algorithm for the primary, secondary, both, or no passwords, depending on account status. CURRENT is the default value.
PRIMARY	Set the algorithm for the primary password only.
SECONDARY	Set the algorithm for the secondary password only.

The following table lists password encryption algorithms:

Type Definition

VMS The algorithm used in the version of the operating system that is running on your system.

CUSTOMER A numeric value in the range of 128 to 255 that identifies a customer algorithm.

Type	Definition
VMS	The algorithm used in the version of the operating system that is running on your system.
CUSTOMER	A numeric value in the range of 128 to 255 that identifies a customer algorithm.

The following example selects the VMS algorithm for Sontag's primary password:

UAF> MODIFY SONTAG/ALGORITHM=PRIMARY=VMS

If you select a site-specific algorithm, you must give a value to identify the algorithm, as follows:

UAF> MODIFY SONTAG/ALGORITHM=CURRENT=CUSTOMER=128

/ASTLM=value

Specifies the AST queue limit, which is the total number of asynchronous system trap (AST) operations and scheduled wake-up requests that the user can have queued at one time. The default is 40 on VAX systems and 250 on Alpha systems.

/BATCH[=(range[,...])]

Specifies the hours of access permitted for batch jobs. For a description of the range specification, see the /ACCESS qualifier. By default, a user can submit batch jobs any time.

/BIOLM=value

Specifies a buffered I/O count limit for the BIOLM field of the UAF record. The buffered I/O count limit is the maximum number of buffered I/O operations, such as terminal I/O, that can be outstanding at one time. The default is 40 on VAX systems and 150 on Alpha systems.

/BYTLM=value

Specifies the buffered I/O byte limit for the BYTLM field of the UAF record. The buffered I/O byte limit is the maximum number of bytes of nonpaged system dynamic memory that a user's job can consume at one time. Nonpaged dynamic memory is used for operations such as I/O buffering, mailboxes, and file-access windows. The default is 32768 on VAX systems and 64000 on Alpha systems.

/CLI=cli-name

Specifies the name of the default command language interpreter (CLI) for the CLI field of the UAF record. The cli-name is a string of 1 to 31 alphanumeric characters and should be either DCL or MCR. The default is DCL. This setting is ignored for network jobs.

/CLITABLES=filespec

Specifies user-defined CLI tables for the account. The filespec can contain 1 to 31 characters. The default is SYS$LIBRARY:DCLTABLES. Note that this setting is ignored for network jobs to guarantee that the system-supplied command procedures used to implement network objects function properly.

/CPUTIME=time

Specifies the maximum process CPU time for the CPU field of the UAF record. The maximum process CPU time is the maximum amount of CPU time a user's process can take per session. You must specify a delta time value. For a discussion of delta time values, refer to the OpenVMS User's Manual. The default is 0, which means an infinite amount of time.

/DEFPRIVILEGES=([NO]privname[,...])

Specifies default privileges for the user; that is, those enabled at login time. A NO prefix removes a privilege from the user. By specifying the keyword [NO]ALL with the /DEFPRIVILEGES qualifier, you can disable or enable all user privileges. The default privileges are TMPMBX and NETMBX. Privname is the name of the privilege.

/DEVICE=device-name

Specifies the name of the user's default device at login. The device-name is a string of 1 to 31 alphanumeric characters. If you omit the colon from the device-name value, AUTHORIZE appends a colon. The default device is SYS$SYSDISK.

If you specify a logical name as the device-name (for example, DISK1: for DUA1:), you must make an entry for the logical name in the LNM$SYSTEM_TABLE in executive mode by using the DCL command DEFINE/SYSTEM/EXEC.

/DIALUP[=(range[,...])]

Specifies hours of access permitted for dialup logins. For a description of the range specification, see the /ACCESS qualifier. The default is full access.

/DIOLM=value

Specifies the direct I/O count limit for the DIOLM field of the UAF record. The direct I/O count limit is the maximum number of direct I/O operations (usually disk) that can be outstanding at one time. The default is 40 on VAX systems and 150 on Alpha systems.

/DIRECTORY=directory-name

Specifies the default directory name for the DIRECTORY field of the UAF record. The directory-name can be 1 to 39 alphanumeric characters. If you do not enclose the directory name in brackets, AUTHORIZE adds the brackets for you. The default directory name is [USER].

/ENQLM=value

Specifies the lock queue limit for the ENQLM field of the UAF record. The lock queue limit is the maximum number of locks that can be queued by the user at one time. The default is 200 on VAX systems and 2000 on Alpha systems.

/EXPIRATION=time (default)

/NOEXPIRATION

Specifies the expiration date and time of the account. The /NOEXPIRATION qualifier removes the expiration date on the account or resets the expiration time for expired accounts. The default expiration time period is 90 days for nonprivileged users.

/FILLM=value

Specifies the open file limit for the FILLM field of the UAF record. The open file limit is the maximum number of files that can be open at one time, including active network logical links. The default is 300 on VAX systems and 100 on Alpha systems.

/FLAGS=([NO]option[,...])

Specifies login flags for the user. The prefix NO clears the flag. The options are as follows:

AUDIT	Enables or disables mandatory security auditing for a specific user. By default, the system does not audit the activities of specific users (NOAUDIT).
AUTOLOGIN	Restricts the user to the automatic login mechanism when logging in to an account. When set, the flag disables login by any terminal that requires entry of a user name and password. The default is to require a user name and password (NOAUTOLOGIN).
CAPTIVE	Prevents the user from changing any defaults at login, for example, /CLI or /LGICMD. It prevents the user from escaping the captive login command procedure specified by the /LGICMD qualifier and gaining access to the DCL command level. Refer to "Guidelines for Captive Command Procedures" in the OpenVMS Guide to System Security. The CAPTIVE flag also establishes an environment where Ctrl/Y interrupts are initially turned off; however, command procedures can still turn on Ctrl/Y interrupts with the DCL command SET CONTROL=Y. By default, an account is not captive (NOCAPTIVE).
DEFCLI	Restricts the user to the default command interpreter by prohibiting the use of the /CLI qualifier at login; the MCR command can still be used. By default, a user can choose a CLI (NODEFCLI).
DISCTLY	Establishes an environment where Ctrl/Y interrupts are initially turned off and are invalid until a SET CONTROL=Y is encountered. This could happen in SYLOGIN.COM or in a procedure called by SYLOGIN.COM. Once a SET CONTROL=Y is executed (which requires no privilege), a user can enter a Ctrl/Y and reach the DCL prompt ($). If the intent of DISCTLY is to force execution of the login command files, then SYLOGIN.COM should issue the DCL command SET CONTROL=Y to turn on Ctrl/Y interrupts before exiting. By default, Ctrl/Y is enabled (NODISCTLY).
DISFORCE_PWD_CHANGE	Removes the requirement that a user must change an expired password at login. By default, a person can use an expired password only once (NODISFORCE_PWD_CHANGE) and then is forced to change the password after logging in. If the user does not select a new password, the user is locked out of the system. To use this feature, set a password expiration date with the /PWDLIFETIME qualifier.
DISIMAGE	Prevents the user from executing RUN, MCR, and foreign commands. By default, a user can execute RUN, MCR, and foreign commands (NODISIMAGE).
DISMAIL	Disables mail delivery to the user. By default, mail delivery is enabled (NODISMAIL).
DISNEWMAIL	Suppresses announcements of new mail at login. By default, the system announces new mail (NODISNEWMAIL).
DISPWDDIC	Disables automatic screening of new passwords against a system dictionary. By default, passwords are automatically screened (NODISPWDDIC).
DISPWDHIS	Disables automatic checking of new passwords against a list of the user's old passwords. By default, the system screens new passwords (NODISPWDHIS).
DISRECONNECT	Disables automatic reconnection to an existing process when a terminal connection has been interrupted. By default, automatic reconnection is enabled (NODISRECONNECT).
DISREPORT	Suppresses reports of the last login time, login failures, and other security reports. By default, login information is displayed (NODISREPORT).
DISUSER	Disables the account so the user cannot log in. For example, the DEFAULT account is disabled. By default, an account is enabled (NODISUSER).
DISWELCOME	Suppresses the welcome message (an informational message displayed during a local login). This message usually indicates the version number of the operating system that is running and the name of the node on which the user is logged in. By default, a system login message appears (NODISWELCOME).
EXTAUTH	Considers user to be authenticated by an external user name and password, not by the SYSUAF user name and password. (The system still uses the SYSUAF record to check a user's login restrictions and quotas and to create the user's process profile.)
GENPWD	Restricts the user to generated passwords. By default, users choose their own passwords (NOGENPWD).
LOCKPWD	Prevents the user from changing the password for the account. By default, users can change their passwords (NOLOCKPWD).
PWD_EXPIRED	Marks a password as expired. The user cannot log in if this flag is set. The LOGINOUT.EXE image sets the flag when both of the following conditions exist: a user logs in with the DISFORCE_PWD_CHANGE flag set, and the user's password expires. A system manager can clear this flag. By default, passwords are not expired after login (NOPWD_EXPIRED).
PWD2_EXPIRED	Marks a secondary password as expired. Users cannot log in if this flag is set. The LOGINOUT.EXE image sets the flag when both of the following conditions exist: a user logs in with the DISFORCE_PWD_CHANGE flag set, and the user's password expires. A system manager can clear this flag. By default, passwords are not set to expire after login (NOPWD2_EXPIRED).
RESTRICTED	Prevents the user from changing any defaults at login (for example, by specifying /LGICMD) and prohibits user specification of a CLI with the /CLI qualifier. The RESTRICTED flag establishes an environment where Ctrl/Y interrupts are initially turned off; however, command procedures can still turn on Ctrl/Y interrupts with the DCL command SET CONTROL=Y. Typically, this flag is used to prevent an applications user from having unrestricted access to the CLI. By default, a user can change defaults (NORESTRICTED).

/GENERATE_PASSWORD[=keyword]

/NOGENERATE_PASSWORD (default)

Invokes the password generator to create user passwords. Generated passwords can consist of 1 to 10 characters. Specify one of the following keywords:

BOTH	Generate primary and secondary passwords.
CURRENT	Do whatever the DEFAULT account does (for example, generate primary, secondary, both, or no passwords). This is the default keyword.
PRIMARY	Generate primary password only.
SECONDARY	Generate secondary password only.

When you modify a password, the new password expires automatically; it is valid only once (unless you specify /NOPWDEXPIRED). On login, users are forced to change their passwords (unless you specify /FLAGS=DISFORCE_PWD_CHANGE).

Note that the /GENERATE_PASSWORD and /PASSWORD qualifiers are mutually exclusive.

/INTERACTIVE[ =(range[,...])]

/NOINTERACTIVE

Specifies the hours of access for interactive logins. For a description of the range specification, see the /ACCESS qualifier. By default, there are no access restrictions on interactive logins.

/JTQUOTA=value

Specifies the initial byte quota with which the jobwide logical name table is to be created. By default, the value is 4096 on VAX systems and 4096 on Alpha systems.

/LGICMD=filespec

Specifies the name of the default login command file. The file name defaults to the device specified for /DEVICE, the directory specified for /DIRECTORY, a file name of LOGIN, and a file type of .COM. If you select the defaults for all these values, the file name is SYS$SYSTEM:[USER]LOGIN.COM.

/LOCAL[=(range[,...])]

Specifies hours of access for interactive logins from local terminals. For a description of the range specification, see the /ACCESS qualifier. By default, there are no access restrictions on local logins.

/MAXACCTJOBS=value

Specifies the maximum number of batch, interactive, and detached processes that can be active at one time for all users of the same account. By default, a user has a maximum of 0, which represents an unlimited number.

/MAXDETACH=value

Specifies the maximum number of detached processes with the cited user name that can be active at one time. To prevent the user from creating detached processes, specify the keyword NONE. By default, a user has a value of 0, which represents an unlimited number.

/MAXJOBS=value

Specifies the maximum number of processes (interactive, batch, detached, and network) with the cited user name that can be active simultaneously. The first four network jobs are not counted. By default, a user has a maximum value of 0, which represents an unlimited number.

/NETWORK[=(range[,...])]

Specifies hours of access for network batch jobs. For a description of how to specify the range, see the /ACCESS qualifier. By default, network logins have no access restrictions.

/OWNER=owner-name

Specifies the name of the owner of the account. You can use this name for billing purposes or similar applications. The owner name is 1 to 31 characters. No default owner name exists.

/PASSWORD=(password1[,password2])

/NOPASSWORD

Specifies up to two passwords for login. Passwords can be from 0 to 32 characters in length and can include alphanumeric characters, dollar signs, and underscores. Avoid using the word password as the actual password. Use the /PASSWORD qualifier as follows:

To set only the first password and clear the second, specify /PASSWORD=password.
To set both the first and second password, specify /PASSWORD=(password1, password2).
To change the first password without affecting the second, specify /PASSWORD=(password, "").
To change the second password without affecting the first, specify /PASSWORD=("", password).
To set both passwords to null, specify /NOPASSWORD.

When you modify a password, the new password expires automatically; it is valid only once (unless you specify /NOPWDEXPIRED). On login, the user is forced to change the password (unless you specify /FLAGS=DISFORCE_PWD_CHANGE).

Note that the /GENERATE_PASSWORD and /PASSWORD qualifiers are mutually exclusive.

By default, the ADD command assigns the password USER. When you create a new UAF record with the COPY or RENAME command, you must specify a password. Avoid using the word password as the actual password.

/PBYTLM

This flag is reserved for Compaq.

/PGFLQUOTA=value

Specifies the paging file limit. This is the maximum number of pages that the person's process can use in the system paging file. By default, the value is 32768 pages on VAX systems and 50000 pagelets on Alpha systems.

If decompressing libraries, make sure to set PGFLQUOTA to twice the size of the library.

/PRCLM=value

Specifies the subprocess creation limit. This is the maximum number of subprocesses that can exist at one time for the specified user's process. By default, the value is 2 on VAX systems and 8 on Alpha systems.

/PRIMEDAYS=([NO]day[,...])

Defines the primary and secondary days of the week for logging in. Specify the days as a list separated by commas, and enclose the list in parentheses. To specify a secondary day, prefix the day with NO (for example, NOFRIDAY). To specify a primary day, omit the NO prefix.

By default, primary days are Monday through Friday and secondary days are Saturday and Sunday. If you omit a day from the list, AUTHORIZE uses the default value. (For example, if you omit Monday from the list, AUTHORIZE defines Monday as a primary day.)

Use the primary and secondary day definitions in conjunction with such qualifiers as /ACCESS, /INTERACTIVE, and /BATCH.

/PRIORITY=value

Specifies the default base priority. The value is an integer in the range of 0 to 31 on VAX systems and 0 to 63 on Alpha systems. By default, the value is set to 4 for timesharing users.

/PRIVILEGES=([NO]privname[,...])

Specifies which privileges the user is authorized to hold, although these privileges are not necessarily enabled at login. (The /DEFPRIVILEGES qualifier determines which ones are enabled.) A NO prefix removes the privilege from the user. The keyword NOALL disables all user privileges. Many privileges have varying degrees of power and potential system impact (see the OpenVMS Guide to System Security for a detailed discussion). By default, a user holds TMPMBX and NETMBX privileges. Privname is the name of the privilege.

/PWDEXPIRED (default)

/NOPWDEXPIRED

Specifies the password is valid for only one login. A user must change a password immediately after login or be locked out of the system. The system warns users of password expiration. A user can either specify a new password, with the DCL command SET PASSWORD, or wait until expiration and be forced to change. By default, a user must change a password when first logging in to an account. The default is applied to the account only when the password is being modified.

/PWDLIFETIME=time (default)

/NOPWDLIFETIME

Specifies the length of time a password is valid. Specify a delta time value in the form [dddd-] [hh:mm:ss.cc]. For example, for a lifetime of 120 days, 0 hours, and 0 seconds, specify /PWDLIFETIME="120-". For a lifetime of 120 days 12 hours, 30 minutes and 30 seconds, specify /PWDLIFETIME="120-12:30:30". If a period longer than the specified time elapses before the user logs in, the system displays a warning message. The password is marked as expired.

To prevent a password from expiring, specify the time as NONE. By default, a password expires in 90 days.

/PWDMINIMUM=value

Specifies the minimum password length in characters. Note that this value is enforced only by the DCL command SET PASSWORD. It does not prevent you from entering a password shorter than the minimum length when you use AUTHORIZE to create or modify an account. By default, a password must have at least 6 characters. The value specified by the /PWDMINIMUM qualifier conflicts with the value used by the /GENERATE_PASSWORD qualifier or the DCL command SET PASSWORD/GENERATE, the operating system chooses the lesser value. The maximum value for generated passwords is 10.

/QUEPRIO=value

Reserved for future use.

/REMOTE[=(range[,...])]

Specifies hours during which access is permitted for interactive logins from network remote terminals (with the DCL command SET HOST). For a description of the range specification, see the /ACCESS qualifier. By default, remote logins have no access restrictions.

/SHRFILLM=value

Specifies the maximum number of shared files that the user can have open at one time. By default, the system assigns a value of 0, which represents an infinite number.

/TQELM

Specifies the total number of entries in the timer queue plus the number of temporary common event flag clusters that the user can have at one time. By default, a user can have 10.

/UIC=value

Specifies the user identification code (UIC). The UIC value is a group number in the range from 1 to 37776 (octal) and a member number in the range from 0 to 177776 (octal), which are separated by a comma and enclosed in brackets. Compaq reserves group 1 and groups 300--377 for its own use.

Each user must have a unique UIC. By default, the UIC value is [200,200].

/WSDEFAULT=value

Specifies the default working set limit. This represents the initial limit to the number of physical pages the process can use. (The user can alter the default quantity up to WSQUOTA with the DCL command SET WORKING_SET.) By default, a user has 256 pages on VAX systems and 2000 pagelets on Alpha systems.

The value cannot be greater than WSMAX. This quota value replaces smaller values of PQL_MWSDEFAULT.

/WSEXTENT=value

Specifies the working set maximum. This represents the maximum amount of physical memory allowed to the process. The system provides memory to a process beyond its working set quota only when it has excess free pages. The additional memory is recalled by the system if needed.

The value is an integer equal to or greater than WSQUOTA. By default, the value is 1024 pages on VAX systems and 16384 pagelets on Alpha systems. The value cannot be greater than WSMAX. This quota value replaces smaller values of PQL_MWSEXTENT.

/WSQUOTA=value

Specifies the working set quota. This is the maximum amount of physical memory a user process can lock into its working set. It also represents the maximum amount of swap space that the system reserves for this process and the maximum amount of physical memory that the system allows the process to consume if the systemwide memory demand is significant.

The value cannot be greater than the value of WSMAX and cannot exceed 64K pages. This quota value replaces smaller values of PQL_MWSQUOTA.

Description

When you do not specify a value for a field, AUTHORIZE uses values from the DEFAULT record (excluding the default password, which is always USER). The DEFAULT account serves as a template for creating user records in the system user authorization file.
On Alpha systems, the DEFAULT account is as follows:
Username: DEFAULT Owner: Account: UIC: [200,200] ([FIELD,USERP]) CLI: DCL Tables: DCLTABLES Default: SYS$SYSDEVICE:[USER] LGICMD: LOGIN Flags: DisUser Primary days: Mon Tue Wed Thu Fri Secondary days: Sat Sun No access restrictions Expiration: (none) Pwdminimum: 6 Login Fails: 0 Pwdlifetime: 90 00:00 Pwdchange: (pre-expired) Last Login: (none) (interactive), (none) (non-interactive) Maxjobs: 0 Fillm: 100 Bytlm: 64000 Maxacctjobs: 0 Shrfillm: 0 Pbytlm: 0 Maxdetach: 0 BIOlm: 150 JTquota: 4096 Prclm: 8 DIOlm: 150 WSdef: 2000 Prio: 4 ASTlm: 250 WSquo: 4000 Queprio: 0 TQElm: 10 WSextent: 16384 CPU: (none) Enqlm: 2000 Pgflquo: 50000 Authorized Privileges: TMPMBX NETMBX Default Privileges: TMPMBX NETMBX
On VAX systems, the DEFAULT account is as follows:
Username: DEFAULT Owner: Account: UIC: [200,200] ([DEFAULT]) CLI: DCL Tables: DCLTABLES Default: SYS$SYSDEVICE:[USER] LGICMD: LOGIN Flags: DisUser Primary days: Mon Tue Wed Thu Fri Secondary days: Sat Sun No access restrictions Expiration: (none) Pwdminimum: 6 Login Fails: 0 Pwdlifetime: 90 00:00 Pwdchange: (pre-expired) Last Login: (none) (interactive) (none) (non-interactive) Maxjobs: 0 Fillm: 300 Bytlm: 32768 Maxacctjobs: 0 Shrfillm: 0 Pbytlm: 0 Maxdetach: 0 BIOlm: 40 JTquota: 4096 Prclm: 2 DIOlm: 40 WSdef: 256 Prio: 4 ASTlm: 40 WSquo: 512 Queprio: 0 TQElm: 10 WSextent: 1024 CPU: (none) Enqlm: 200 Pgflquo: 32768 Authorized Privileges: TMPMBX NETMBX Default Privileges: TMPMBX NETMBX
When you add a new account, specify values for fields that you want to be different. Typically, changing the default values for limits¹, priority, privileges, or the command interpreter is not necessary. As a result, you enter only the password, UIC, directory, owner, account, and device.

Note

¹ Note that limits are also set by system parameters. To be effective, the limits you set through AUTHORIZE must be within the minimum limits determined by the corresponding system parameters (particularly those beginning with the PQL prefix).

Previous Next Contents Index

privacy and legal statement

6048PRO_009.HTML

/ACCESS	Allows unrestricted access
/NOACCESS=SECONDARY	Allows access on primary days only
/ACCESS=(9-17)	Allows access from 9 A.M. to 5:59 P.M. on all days
/NOACCESS=(PRIMARY, 9-17, SECONDARY, 18-8)	Disallows access between 9 A.M. to 5:59 P.M. on primary days but allows access during these hours on secondary days

OpenVMS System Management Utilities Reference Manual

/ACCOUNT=account-name

/ADD_IDENTIFIER (default)

/NOADD_IDENTIFIER

/ALGORITHM=keyword=type [=value]

/ASTLM=value

/BATCH[=(range[,...])]

/BIOLM=value

/BYTLM=value

/CLI=cli-name

/CLITABLES=filespec

/CPUTIME=time

/DEFPRIVILEGES=([NO]privname[,...])

/DEVICE=device-name

/DIALUP[=(range[,...])]

/DIOLM=value

/DIRECTORY=directory-name

/ENQLM=value

/EXPIRATION=time (default)

/NOEXPIRATION

/FILLM=value

/FLAGS=([NO]option[,...])

/GENERATE_PASSWORD[=keyword]

/NOGENERATE_PASSWORD (default)

/INTERACTIVE[ =(range[,...])]

/NOINTERACTIVE

/JTQUOTA=value

/LGICMD=filespec

/LOCAL[=(range[,...])]

/MAXACCTJOBS=value

/MAXDETACH=value

/MAXJOBS=value

/NETWORK[=(range[,...])]

/OWNER=owner-name

/PASSWORD=(password1[,password2])

/NOPASSWORD

/PBYTLM

/PGFLQUOTA=value

/PRCLM=value

/PRIMEDAYS=([NO]day[,...])

/PRIORITY=value

/PRIVILEGES=([NO]privname[,...])

/PWDEXPIRED (default)

/NOPWDEXPIRED

/PWDLIFETIME=time (default)

/NOPWDLIFETIME

/PWDMINIMUM=value

/QUEPRIO=value

/REMOTE[=(range[,...])]

/SHRFILLM=value

/TQELM

/UIC=value

/WSDEFAULT=value

/WSEXTENT=value

/WSQUOTA=value

Description

1 Note that limits are also set by system parameters. To be effective, the limits you set through AUTHORIZE must be within the minimum limits determined by the corresponding system parameters (particularly those beginning with the PQL prefix).

¹ Note that limits are also set by system parameters. To be effective, the limits you set through AUTHORIZE must be within the minimum limits determined by the corresponding system parameters (particularly those beginning with the PQL prefix).