OpenVMS DCL Dictionary

Document revision date: 19 July 1999

OpenVMS DCL Dictionary

Contents

Index

SET KEY

Sets and locks the key definition state for keys defined with the DEFINE/KEY command.

Format

SET KEY

Description

When you define keypad keys using the DEFINE/KEY command, you can assign a specific state name to the key definition. If that state is not set when you press the key, the definition is not processed. Use the SET KEY command to change the current state to the appropriate state.

Qualifiers

/LOG (default)

/NOLOG
Controls whether the system displays a message indicating that the key state has been set.
/STATE=state-name

/NOSTATE
Specifies the name of the state. The state name can be any alphanumeric string. If you omit the /STATE qualifier or use the /NOSTATE qualifier, the current state is left unchanged. The default state is DEFAULT.

Example


$ SET KEY /STATE=EDITING

The SET KEY command in this example sets the key state to the state EDITING. You can now use the key definitions that were defined for the state EDITING.

SET LOGINS

Sets the interactive limit (number of interactive users allowed on the system), or displays the interactive limit and the current number of interactive users.
Requires OPER (operator) privilege to set the login limit.

Format

SET LOGINS

Parameters

None.

Description

The SET LOGINS command is not retroactive. All users logged in to the system before you enter the SET LOGINS command are not affected by the command. However, once the limit you set is reached, no more users can log in to the system until someone else logs out. Users with the OPER privilege are not affected by the limit.
If you do not specify a parameter value with the /INTERACTIVE=n qualifier, the SET LOGINS command displays the following information:
Login quotas - Interactive limit=x, Current interactive value=y
The value x represents the current interactive limit, and the value y represents the number of users currently logged in to the system.

Qualifier

/INTERACTIVE[=n]
Establishes the number of interactive users allowed to gain access to the system. If the parameter n is specified, the interactive limit is set to the value n. If the parameter n is not specified, the SET LOGINS command displays the current interactive limit and the number of interactive users.

Examples

#1
$ SET LOGINS/INTERACTIVE=5 %SET-I-INTSET, login interactive limit=5, current interactive value=3

In this example, the SET LOGINS command specifies that only five interactive users can be logged in to the system.

#2
$ SET LOGINS/INTERACTIVE %SET-I-INTSET, login interactive limit=9, current interactive value=6

When the SET LOGINS command is entered without a parameter, as shown in this example, the /INTERACTIVE qualifier requests that the current status of the login quotas be displayed. The message returned indicates that the maximum number of interactive users allowed on the system is 9 and that the number of interactive users currently logged in is 6. No change is made.

SET MAGTAPE

Defines the default characteristics associated with a specific magnetic tape device for subsequent file operations.
The SET MAGTAPE command is valid for magnetic tape devices mounted with foreign volumes.

Format

SET MAGTAPE device-name[:]

Parameter

device-name[:]
Specifies the name of the magnetic tape device for which the characteristics are to be set. The device must not be currently allocated to any other user.

Qualifiers

/DENSITY=density-value
Specifies the default density, in bits per inch (bpi), for all write operations on the magnetic tape device when the volume is mounted as a foreign tape or as an unlabeled tape.
Valid density values are:

Keyword Meaning

DEFAULT Default density

800 NRZI 800 bits per inch (BPI)

1600 PE 1600 BPI

6250 GRC 6250 BPI

3480 IBM 3480 HPC 39872 BPI

3490E IBM 3480 compressed

833 DLT TK50: 833 BPI

TK50 DLT TK50: 833 BPI

TK70 DLT TK70: 1250 BPI

6250 RV80 6250 BPI EQUIVALENT

NOTE: Only the keywords above are understood by TMSCP/TUDRIVER code prior to OpenVMS Version 7.2.

TK85 DLT Tx85: 10625 BPI - Cmpt III

TK86 DLT Tx86: 10626 BPI - Cmpt III

TK87 DLT Tx87: 62500 BPI - Cmpt III

TK88 DLT Tx88: (Quantum 4000) - Cmpt IV

TK89 DLT Tx89: (Quantum 7000) - Cmpt IV

QIC All QIC drives are drive-settable only

8200 Exa-Byte 8200

8500 Exa-Byte 8500

DDS1 Digital Data Storage 1 - 2G

DDS2 Digital Data Storage 2 - 4G

DDS3 Digital Data Storage 3 - 8-10G

DDS4 Digital Data Storage 4

AIT1 Sony Advanced Intelligent Tapes

/END_OF_FILE
Writes a tape mark at the current position on the magnetic tape volume.
/FAST_SKIP=option
Allows you to skip by file mark or by record.

Note
This tape positioning qualifier is for use on local SCSI tape drives only.

PER_IO (default) Allows a local MK device to use the skip-by-filemarks function. The tape drive must be able to do a SCSI READ POSITION command and report blank check at end-of-data. The IO$M_ALLOWFAST function modifier must be supplied with IO$_SKIPFILE. Otherwise, the tape will skip files using the skip-by-records function.

ALWAYS Allows a local MK device to use the skip-by-filemarks function. The tape drive must be able to support the skip-by-filemarks function, and no modifications should be needed to the IO$_SKIPFILE function.

NEVER Specifies that a local MK device skip only by records. If you use a utility that depends on the semantics of skipping with skip-records, you may also need to use this option since it causes BACKUP or COPY to use the previous positioning.

/LOG

/NOLOG
Displays information about the operations performed on the magnetic tape volume.
/LOGSOFT (default)

/NOLOGSOFT
Controls whether soft errors on the specified device are to be logged in the error log file. Soft errors are errors corrected by the hardware without software intervention. This qualifier affects only devices that support hardware error correction, such as the TU78 magnetic tape drive. When used with other devices, this qualifier has no effect.
/MEDIA_FORMAT=[NO]COMPACTION
Controls whether data records are automatically compacted and blocked together on a TA90E tape drive. Data compaction and record blocking increase the amount of data that can be stored on a single tape cartridge.
Note that once data compaction or noncompaction has been selected for a given cartridge, that same status applies to the entire cartridge.
/RETENSION
Moves a TZK10 tape cartridge to the end of the tape, and then back to the beginning of the tape. Use the /RETENSION qualifier on a regular basis to help maintain the integrity of TZK10 tape cartridges.
The /RETENSION qualifier must be used in conjunction with the /REWIND or /UNLOAD qualifier. The /RETENSION qualifier completes its action before /REWIND or /UNLOAD. Use /RETENSION/REWIND when you want the tape cartridge to remain loaded in the drive. Use /RETENSION/UNLOAD when you want to unload the tape cartridge after the retension operation.
This qualifier only affects TZK10 tape cartridge drives and has no effect on non-SCSI drives.
/REWIND
Requests that the volume on the specified device be rewound to the beginning of the magnetic tape.
/SKIP=option
Requests that the magnetic tape volume be positioned according to any of the following options:

BLOCK: n Skips the specified number of blocks.

END_OF_TAPE Positions the volume at the end-of-tape (EOT) mark.

FILES: n Skips the specified number of tape marks (not files).
The tape is positioned just past the nth tape mark. If n is negative, the tape is still positioned after the nth tape mark, not before it. If the tape is already positioned immediately after a tape mark, a skip of -1 results in no net movement. (The tape moves to the preceding mark, but is then repositioned to the end of the mark, where it began.) For more information on tape marks and files, refer to the OpenVMS System Manager's Manual.

RECORD: n Skips the specified number of records up to 32767.

/UNLOAD
Requests that the volume on the specified device be rewound and unloaded.

Keyword	Meaning
DEFAULT	Default density
800	NRZI 800 bits per inch (BPI)
1600	PE 1600 BPI
6250	GRC 6250 BPI
3480	IBM 3480 HPC 39872 BPI
3490E	IBM 3480 compressed
833	DLT TK50: 833 BPI
TK50	DLT TK50: 833 BPI
TK70	DLT TK70: 1250 BPI
6250	RV80 6250 BPI EQUIVALENT
NOTE: Only the keywords above are understood by TMSCP/TUDRIVER code prior to OpenVMS Version 7.2.
TK85	DLT Tx85: 10625 BPI - Cmpt III
TK86	DLT Tx86: 10626 BPI - Cmpt III
TK87	DLT Tx87: 62500 BPI - Cmpt III
TK88	DLT Tx88: (Quantum 4000) - Cmpt IV
TK89	DLT Tx89: (Quantum 7000) - Cmpt IV
QIC	All QIC drives are drive-settable only
8200	Exa-Byte 8200
8500	Exa-Byte 8500
DDS1	Digital Data Storage 1 - 2G
DDS2	Digital Data Storage 2 - 4G
DDS3	Digital Data Storage 3 - 8-10G
DDS4	Digital Data Storage 4
AIT1	Sony Advanced Intelligent Tapes

Examples

#1
$ MOUNT MTB1:/FOREIGN $ SET MAGTAPE MTB1: /DENSITY=800

The MOUNT command in this example mounts a foreign tape on the device MTB1. The SET MAGTAPE command defines the density for writing the magnetic tape at 800 bpi.

#2
$ MOUNT MTA0:/FOREIGN $ SET MAGTAPE MTA0:/SKIP=FILES:4

The MOUNT command in this example mounts a foreign tape on the device MTA0; the SET MAGTAPE command directs the magnetic tape position to skip four files.

SET MESSAGE

Sets the format for system messages or specifies a process level message file. Lets you override or supplement the system messages.

Format

SET MESSAGE [filespec]

Parameter

filespec
Specifies the name of the process level message file. Messages in this file supersede messages for the same conditions in the system message file or in an existing process message file. The file type defaults to .EXE. The asterisk (*) and the percent sign (%) wildcard characters are not allowed. If you do not specify this parameter, the qualifiers apply to the system message file.

Description

The SET MESSAGE command specifies which message fields the OpenVMS system displays. The message format is as follows:
%FACILITY-L-IDENT, text
When a process is created, the default is to display all four message fields: facility, severity, identification, and text. To control which fields of a message are displayed, specify the appropriate qualifiers. For example, to omit the FACILITY field in message displays, specify SET MESSAGE /NOFACILITY.
By including the SET MESSAGE command in your login command file, you can select specific portions of the messages for your process.
Use the SET MESSAGE command, also, to override or supplement system messages. Whenever any software detects an error and invokes the $GETMSG system service, the message files are searched in the following order: image message sections first, process-permanent message files second, and the system message file last. Thus, with the SET MESSAGE command, you can introduce messages earlier in the searching order; you can either override or supplement the system messages. (Note that the new message definitions affect only your process.)
If a process-permanent message file exists when you specify the SET MESSAGE command with a file specification, the old file is removed and the new file is added.
The message definitions you specify must result from a successful compilation with the MESSAGE command. For full details on how to create your own messages with the Message utility, refer to the OpenVMS Command Definition, Librarian, and Message Utilities Manual.

Qualifiers

/DELETE
Removes any process-permanent message files currently in effect. Do not specify the filespec parameter with the /DELETE qualifier.
/FACILITY (default)

/NOFACILITY
Formats messages so that the facility name prefix appears.
/IDENTIFICATION (default)

/NOIDENTIFICATION
Formats messages so that the message identification prefix appears.
/SEVERITY (default)

/NOSEVERITY
Formats messages so that the severity level appears.
/TEXT (default)

/NOTEXT
Formats messages so that the message text appears.

Examples

#1
$ TYPE XXX %TYPE-W-OPENIN, error opening DB1:[MALCOLM]XXX.LIS; as input -RMS-E-FNF, file not found . . . $ SET MESSAGE/NOIDENTIFICATION . . . $ TYPE XXX %TYPE-W, error opening DB1:[MALCOLM]XXX.LIS; as input -RMS-E, file not found

$ TYPE XXX
%TYPE-W-OPENIN, error opening DB1:[MALCOLM]XXX.LIS; as input
-RMS-E-FNF, file not found
   .
   .
   .
$  SET MESSAGE/NOIDENTIFICATION
   .
   .
   .
$ TYPE XXX
%TYPE-W, error opening DB1:[MALCOLM]XXX.LIS; as input
-RMS-E, file not found

When the first TYPE command is entered in this example, the error messages include all fields. Later, the SET MESSAGE command establishes that the IDENT portion (the abbreviation for the message text) is omitted in future messages.

#2
$ SET MESSAGE NEWMSG

The SET MESSAGE command in this example specifies that the message text in NEWMSG.EXE supplements the existing system messages.

SET NETWORK

Registers the attributes of a network service.
Requires SYSNAM (system name) privilege.

Format

SET NETWORK network-service

Parameter

network-service
Specifies the name of a network service.

Description

The SET NETWORK command allows you to control information about network services on an OpenVMS system. This information is contained in structures pointed to by executive mode logical names SYS$NET_SERVICES_1 to SYS$NET_SERVICES_12. Each structure defines a particular network service and contains the following information:

Product name
Manufacturer
Type of network
Node name
Address(es)
Interface(s) (OpenVMS device driver)
Vendor-specific data
Status
Connections
Counters
Start command
Stop command
Path to the Point-to-Point Protocol utility (PPPD) shareable image

The following items are required for network registration: product name, manufacturer, type of network, node name, address. For each network service that supports the Point-to-Point Protocol (PPP), the file name of the PPPD shareable image must also be specified using the /PPPD_CALLOUT qualifier.
The SET NETWORK command allows you to perform the following actions on the information on network services:

Add a service (use the /REGISTER qualifier)
Delete a service (use the /REMOVE qualifier)
Modify the information for a service (use the /UPDATE qualifier)

The /REGISTER qualifier is the default, if you do not specify an action.

Qualifiers

/ADDRESS=address[es]
Specifies the network address of the local node.
/CONNECTIONS=
Specifies a command to be executed to display the number of network connections.
/COUNTERS=
Specifies a command to be executed to display the number of network counters.
/DATA=
Specifies a character string provided by the network service vendor.
/INTERFACE=
Specifies the OpenVMS driver for the network service.
/MANUFACTURER=
Specifies the manufacturer of the network service.
/NETWORK_TYPE=
Specifies the protocol for the network service.
/NODE=
Specifies the name of the local node.
/PPPD_CALLOUT=image-name
Specifies the name of the protected shareable image activated by PPPD. This image contains the routine PPPD$OPEN_CONNECT, which notifies the network service that a new physical transport exists that supports PPP. If the image resides in the SYS$SHARE directory, enter the file name of the image without the suffix (such as, PPPD_CALLOUT instead of PPPD_CALLOUT.EXE). Otherwise, enter the system logical that identifies the location of the image.
/REGISTER
Defines a new network service.
/REMOVE
Deletes a network service from the database.
/START=
Specifies an image to be executed when you issue the START/NETWORK command for the network service.
/STATUS=
Specifies a command to be executed to display additional status information.
/STOP=
Specifies an image to be executed when you issue the STOP/NETWORK command for the network service.
/UPDATE
Allows you to modify the specified data for the network service.

Examples

#1
$ SET NETWORK DECnet/OSI - /MANUFACTURER= "Digital Equipment Corporation" /NODE="GALENA" /ADDRESS="19.129" /NETWORK_TYPE="DNA V" /INTERFACE="net 0" /DATA="Router: No" /STATUS="mcr ncl show node 0 all" /CONNECTIONS="mcr ncl show node 0 session control port * all" /COUNTERS="mcr ncl show node 0 session control all counters" /START="@sys$startup:net$startup" /STOP="@sys$manager:net$shutdown")

$ SET NETWORK DECnet/OSI -
    /MANUFACTURER= "Digital Equipment Corporation"
    /NODE="GALENA"
    /ADDRESS="19.129"
    /NETWORK_TYPE="DNA V"
    /INTERFACE="net 0"
    /DATA="Router: No"
    /STATUS="mcr ncl show node 0 all"
    /CONNECTIONS="mcr ncl show node 0 session control port * all"
    /COUNTERS="mcr ncl show node 0 session control all counters"
    /START="@sys$startup:net$startup"
    /STOP="@sys$manager:net$shutdown")

This command adds the network service DECnet-Plus (Phase V) to the database, with the specified characteristics.

#2
$ SET NETWORK TCP/IP /REGISTER- /MANUFACTURER="Digital Equipment Corporation" /NODE="ipv6.ucx.mars.univers.com" /ADDRESS="16.20.207.92" /NETWORK_TYPE="TCPIP" /STATUS="ucx show service" /CONNECTIONS="ucx show device" /PPPD_CALLOUT="ucx$pppd_callout"

$ SET NETWORK TCP/IP /REGISTER-
/MANUFACTURER="Digital Equipment Corporation"
/NODE="ipv6.ucx.mars.univers.com"
/ADDRESS="16.20.207.92"
/NETWORK_TYPE="TCPIP"
/STATUS="ucx show service"
/CONNECTIONS="ucx show device"
/PPPD_CALLOUT="ucx$pppd_callout"

This command creates a new TCP/IP network service, adds it to the database, and enables the PPPD utility by supplying a logical that identifies the location of the shareable image.

SET ON

Enables error checking by the command interpreter after the execution of each command in a command procedure. Specify SET NOON to disable error checking.

Format

SET [NO]ON

Parameters

None.

Description

During the execution of command procedures, the command interpreter normally checks the status code returned when a DCL command or program image completes and saves the numeric value of this code in the reserved symbol named $STATUS. The low-order 3 bits of this value are also saved in the reserved symbol $SEVERITY. Command procedure execution aborts when either an error or fatal error is detected.
Use the SET NOON command to override default error checking. When SET NOON is in effect, the command interpreter continues to place the status code value in $STATUS and the severity level in $SEVERITY, but does not perform any action based on the values. As a result, the command procedure continues to execute no matter how many errors are returned.
The SET ON or SET NOON command applies only at the current command level. If you use the SET NOON command in a command procedure that executes another procedure, the default, SET ON, is established while the second procedure executes.

Example


$ SET NOON $ DELETE .SAV; $ SET ON $ COPY .OBJ .SAV

This command procedure routinely copies all object modules into new files with the file type .SAV. The DELETE command first deletes all existing files with the .SAV file type, if any. The SET NOON command ensures that the procedure continues executing even if there are no files with the .SAV file type in the current directory. Following the DELETE command, the SET ON command restores error checking. Then the COPY command makes copies of all existing files with .OBJ file type.

Contents

Index

privacy and legal statement

9996PRO_054.HTML

PER_IO (default)	Allows a local MK device to use the skip-by-filemarks function. The tape drive must be able to do a SCSI READ POSITION command and report blank check at end-of-data. The IO$M_ALLOWFAST function modifier must be supplied with IO$_SKIPFILE. Otherwise, the tape will skip files using the skip-by-records function.
ALWAYS	Allows a local MK device to use the skip-by-filemarks function. The tape drive must be able to support the skip-by-filemarks function, and no modifications should be needed to the IO$_SKIPFILE function.
NEVER	Specifies that a local MK device skip only by records. If you use a utility that depends on the semantics of skipping with skip-records, you may also need to use this option since it causes BACKUP or COPY to use the previous positioning.

BLOCK: n	Skips the specified number of blocks.
END_OF_TAPE	Positions the volume at the end-of-tape (EOT) mark.
FILES: n	Skips the specified number of tape marks (not files). The tape is positioned just past the nth tape mark. If n is negative, the tape is still positioned after the nth tape mark, not before it. If the tape is already positioned immediately after a tape mark, a skip of -1 results in no net movement. (The tape moves to the preceding mark, but is then repositioned to the end of the mark, where it began.) For more information on tape marks and files, refer to the OpenVMS System Manager's Manual.
RECORD: n	Skips the specified number of records up to 32767.