Sample Environment File

The file entries are in the form:

variable=value

To change a value, simply replace it with the new value. The possible values are listed as comments (prefaced with #) just following the variable.

Sample Environment File

# This file contain most of the variable used by dce_config.
# You can pass this on the command line via the -e switch
# or dce_config will look at /etc/dce_config.conf by default.
#
# This is a shell script sourced in to dce_config at startup
# and can contain shell commands if you wish.
#

#
# General config values
#

EXIT_ON_ERROR=n # y/n Exit if fatal error encountered, default n
DO_CHECKS=n # y/n Prompt for continue after warnings, default y

CELL_ADMIN=cell_admin # Principal name of Cell Administrator
CELL_ADMIN_PW=-dce- # Password for CELL_ADMIN account

#TOLERANCE_SEC=120 # Number of seconds clients can differ from sec server
check_time=y # y/n if you want to check times, default y
SYNC_CLOCKS=y # y/n Sync our clock to $TIME_SERVER
TIME_SERVER="<host>" # Any host which has dts server on it,
# usually the security server ($SEC_SERVER)

#
# Install
#

REMOVE_PREV_INSTALL=y # y/n Remove previous install before
# installing anything.

mach=`uname`
case $mach in
OSF1) machine=at386;;
AIX) machine=rios;;
HP-UX) machine=hp800;;
esac
# path to install area
#FILESYSTEM="install/${machine}/opt/dce1.1"
#MEDIA="<device>" # device to read tape from

CP_OR_SYMLINK=copy # Use copy or sym-links(link) to install
USE_DEF_MSG_PATH=y # y/n use default message catalog path
USE_ETHER_FILE=y # y/n Trust /etc/ieee_802_addr file (OSF/1)
DO_LIB_ADMIN=y # y/n Install libdce.so on OSF/1 system

#
# DFS install
#

INSTALL_OPT_SERS=y # y/n install optional servers (bak, butc, etc)
INSTALL_OPT_CLIENT=y # y/n install optional client binaries (cm, etc)

#
# General config variables
#
REMOVE_PREV_CONFIG=y # y/n Remove previous config before config-ing anything

CELL_NAME="<cellname>" # Name of cell to configure

#HOST_NAME_IP="<ip_address>" # IP address of current host (if getip fails)

#
# DCE Client config
#
DTS_CONFIG=clerk # When doing DCE client config, what should
# we be? clerk, local, global, none

#
# Security Config
#

SEC_SERVER="<host>" # Hostname of security server
#SEC_SERVER_IP="<ip-address>" # fallback if getip program doesn't work
KEYSEED="garBageMan" # Keyseed for initial database master

#
# Default values are provided, for PWD_MGMT_SVR and PWD_MGMT_SVR_OPTIONS.
#

# PWD_MGMT_SVR="$DCELOCAL/bin/pwd_strengthd" # Path to Password Management Server
# PWD_MGMT_SVR_OPTIONS="-v" # Options for Password Management Server

#SEC_REPLICA="<hostname>" # Name of the security replica database

#
# CDS Config
#

CACHE_CDS_SERVER="<hostname>" # Name of a cds server to cache
#CACHE_CDS_SERVER_IP="<ip_address>" # fallback if getip program doesn't work
MULTIPLE_LAN=n # y/n do you have multiple LANs
#LAN_NAME="<name>" # Name of lan if MULTIPLE_LAN=y

#REP_CLEARINGHOUSE="<name_ch>" # Name for new replica clearing house
#DIR_REPLICATE="n" # y/n manually type in more directories
# to replicate.

#
# GDA
#

#
# DTS Config
#
NTP_HOST="<hostname>" # Name of ntp server

#SEC_REPLICA="<hostname>" # Name of the security replica database

#
# CDS Config
#
CACHE_CDS_SERVER="<hostname>" # Name of a cds server to cache
#CACHE_CDS_SERVER_IP="<ip_address>" # fallback if getip program doesn't work
MULTIPLE_LAN=n # y/n do you have multiple LANs
#LAN_NAME="<name>" # Name of lan if MULTIPLE_LAN=y

#REP_CLEARINGHOUSE="<name_ch>" # Name for new replica clearing house
#DIR_REPLICATE="n" # y/n manually type in more directories
# to replicate.

#
# GDA
#

#
# DTS Config
#
NTP_HOST="<hostname>" # Name of ntp server

#
# DFS Config
#

AGG_FS_TYPE=native # native/episode aggregate fs type to export
AGG_DEV_NAME="<device>" # device name for the aggregate to be exported
AGG_MOUNT_PATH="<path>" # mount path for aggregate
AGG_NAME="<name>" # Name of aggregate
AGG_ID="<number>" # numerical id of aggregate

CACHE_SIZE_RAM=10000 # number of bytes for memory cache
CACHE_SIZE_DISK=10000 # number of bytes for disk cache
CACHE_DIR_DISK="/opt/dcelocal/var/adm/dfs/cache" # pathname of disk cache
CLIENT_CACHE_LOC=disk # mem/disk where is the cache
CONFIG_NFS_GATEWAY=n # configure dfs client as nfs gateway

EPI_FORMAT_PART=n # y/n format partition as episode
EPI_FORCE_INIT=n # y/n force initialization, even if data loss
INIT_LFS=n # y/n initialize the LFS (using epiinit)?
LOAD_LFS_KEXT=n # y/n load LFS kernel extensions

ROOT_FILESET_NM="<name>" # Root fileset name
SCM_NAME="<hostname>" # System Control Machine name