disable(8dts)
Stops the DCE DTS entity on the local node
Synopsis
dtscp disable
Description
The disable command turns off the DCE DTS entity on the system where the command is entered. When the command is executed, the status attribute
state is set to off.
Privileges Required
You must have w (write) permission on the ACL associated with the DTS entity to execute the command.
Notes
The DCE DTS entity cannot be disabled until it is enabled with the enable command. You must enter the disable command before you can delete the
entity.
This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE.
Examples
dtscp> disable
Related Information
Commands: