Reliable Transaction Router
Installation Guide
Previous Contents

1.4 Installing RTR for SunOS

Your Reliable Transaction Router for SunOS kit is supplied on :CD-ROM. The Release Notes are also on the :CD-ROM; you are advised to read the Release Notes before using RTR.

The installation requires about 2950 KB on the partition given in response to the package base directory prompt (usually /opt). The installation procedure takes about two minutes to complete.

Note that the Installation Verification Procedure (IVP) requires a working C language compiler to run.

1.4.1 Installation Procedure

  1. Login as user root or su to root .
  2. First check whether RTR is already installed, stop, and disconnect rtr: 


    # pkginfo -l rtr 
# rtr stop rtr 
# rtr disconnect server

  3. If it is, deinstall using the following command. 


    # pkgrm rtr

  4. Insert the :CD-ROM and mount the volume at a convenient mount point (for example, /cdrom).
  5. Install RTR from the :CD-ROM directory where the kit is located, for example: 


    # cd /cdrom/rtr_kit 
# pkgadd -d .

  6. RTR is now installed in /opt/rtr .

Section 1.4.3 shows an example installation of RTR for the SunOS.

1.4.2 Running the IVP

The Installation Verification Procedure (IVP) requires a working C language compiler to run.

Note
Do not run the IVP program on a production system, as it may alter the RTR journal or interrupt processing of transactions. You will be prompted to abort the IVP before it can do any damage. Consider your situation carefully before running the IVP.

You may run the IVP separately from the installation procedure. If you are not using the C shell, start it by typing /usr/bin/csh and run the IVP by typing the following:- 


# setenv BASEDIR /opt

and then executing the file pkg/rtr/reloc/rtr/RTRxxx/examples/rtr/rtr_ivp_osf.sh.

1.4.3 Sample SunOS Installation


 
sunbox# pkgadd -d . 
 
The following packages are available: 
  1  rtr     Reliable Transaction Router 
             (sun4u) 320 
 
Select package(s) you wish to process (or 'all' to process 
all packages). (default: all) [?,??,q]: 1 
 
Processing package instance <rtr> from </kit238sun_ins/pkg> 
 
Reliable Transaction Router 
(sun4u) 320 
COMPAQ 
 
Enter path to package base directory [?,q] /opt 
Using </opt> as the package base directory. 
## Processing package information. 
## Processing system information. 
   1 package pathname is already properly installed. 
## Verifying disk space requirements. 
## Checking for conflicts with packages already installed. 
## Checking for setuid/setgid programs. 
 
This package contains scripts which will be executed with super-user 
permission during the process of installing this package. 
 
Do you want to continue with the installation of <rtr> [y,n,?] 
Do you want to continue with the installation of <rtr> [y,n,?] y 
 
Installing Reliable Transaction Router as <rtr> 
 
## Installing part 1 of 1. 
/opt/rtr/RTR320/bin/rtr 
/opt/rtr/RTR320/bin/rtr_r 
/opt/rtr/RTR320/bin/rtr_remote 
/opt/rtr/RTR320/bin/rtr_rqif 
/opt/rtr/RTR320/bin/rtr_snapshot.sh 
/opt/rtr/RTR320/examples/rtr/crtr.cxx 
/opt/rtr/RTR320/examples/rtr/crtr.hxx 
/opt/rtr/RTR320/examples/rtr/cslb.hxx 
/opt/rtr/RTR320/examples/rtr/example_cli.cxx 
/opt/rtr/RTR320/examples/rtr/example_cslb.hxx 
/opt/rtr/RTR320/examples/rtr/example_srv.cxx 
/opt/rtr/RTR320/examples/rtr/rtr_ivp_osf.sh 
/opt/rtr/RTR320/examples/rtr/rtrreq.c 
/opt/rtr/RTR320/examples/rtr/rtrsrv.c 
/opt/rtr/RTR320/hlp/copyright.txt 
/opt/rtr/RTR320/hlp/license.txt 
/opt/rtr/RTR320/hlp/rtr.hlb 
/opt/rtr/RTR320/hlp/rtr.hlp 
/opt/rtr/RTR320/lib/rtr.h 
/opt/rtr/RTR320/mon/accfail.mon 
/opt/rtr/RTR320/mon/acp2app.mon 
/opt/rtr/RTR320/mon/active.mon 
/opt/rtr/RTR320/mon/app2acp.mon 
/opt/rtr/RTR320/mon/broadcast.mon 
/opt/rtr/RTR320/mon/calls.mon 
/opt/rtr/RTR320/mon/channel.mon 
/opt/rtr/RTR320/mon/connects.mon 
/opt/rtr/RTR320/mon/ddtm.mon 
/opt/rtr/RTR320/mon/dtx.mon 
/opt/rtr/RTR320/mon/dtxrec.mon 
/opt/rtr/RTR320/mon/event.mon 
/opt/rtr/RTR320/mon/facility.mon 
/opt/rtr/RTR320/mon/flow.mon 
/opt/rtr/RTR320/mon/frontend.mon 
/opt/rtr/RTR320/mon/group.mon 
/opt/rtr/RTR320/mon/ipc.mon 
/opt/rtr/RTR320/mon/ipcrate.mon 
/opt/rtr/RTR320/mon/jcalls.mon 
/opt/rtr/RTR320/mon/journal.mon 
/opt/rtr/RTR320/mon/link.mon 
/opt/rtr/RTR320/mon/netbytes.mon 
/opt/rtr/RTR320/mon/netstat.mon 
/opt/rtr/RTR320/mon/partit.mon 
/opt/rtr/RTR320/mon/queues.mon 
/opt/rtr/RTR320/mon/quorum.mon 
/opt/rtr/RTR320/mon/rdm.mon 
/opt/rtr/RTR320/mon/recovery.mon 
/opt/rtr/RTR320/mon/rejects.mon 
/opt/rtr/RTR320/mon/rejhist.mon 
/opt/rtr/RTR320/mon/response.mon 
/opt/rtr/RTR320/mon/rfb.mon 
/opt/rtr/RTR320/mon/rolequor.mon 
/opt/rtr/RTR320/mon/routers.mon 
/opt/rtr/RTR320/mon/routing.mon 
/opt/rtr/RTR320/mon/rscbe.mon 
/opt/rtr/RTR320/mon/rtr.mon 
/opt/rtr/RTR320/mon/stalls.mon 
/opt/rtr/RTR320/mon/system.mon 
/opt/rtr/RTR320/mon/tps.mon 
/opt/rtr/RTR320/mon/tpslo.mon 
/opt/rtr/RTR320/mon/traffic.mon 
/opt/rtr/RTR320/mon/trans.mon 
/opt/rtr/RTR320/mon/v2calls.mon 
/opt/rtr/RTR320/mon/xa.mon 
/opt/rtr/RTR320/shlib/librtr.so 
/opt/rtr/RTR320/shlib/librtr_r.so 
[ verifying class <none> ] 
## Executing postinstall script. 
# Copyright 1994, 1999  Digital Equipment Corporation. 
# 
# Restricted Rights: Use, duplication, or disclosure by the U.S. Government 
# is subject to restrictions as set forth in subparagraph (c) (1) (ii) of 
# DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, as 
# applicable. 
# 
# This software is proprietary to and embodies the confidential technology 
# of Compaq Computer Corporation and Digital Equipment Corporation. 
# Possession, use, or copying of this software and media is authorized 
# only pursuant to a valid written license from Compaq or an 
# authorized sublicensor. 
# 
# Compaq, the Compaq logo, and the Digital logo are registered in the 
# U.S. Patent and Trademark Office. 
 
 
This kit will only run on Sun Solaris 2.5 and higher. 
 
Installation should complete in approximately 1 minute.

1.4.4 Sample IVP Output


 
  Copyright 1994, 1999 Digital Equipment Corporation. 
 
  Restricted Rights: Use, duplication, or disclosure by the U.S. Government 
  is subject to restrictions as set forth in subparagraph (c) (1) (ii) of 
  DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, as 
  applicable. 
 
  This software is proprietary to and embodies the confidential technology 
  of Compaq Computer Corporation and Digital Equipment Corporation. 
  Possession, use, or copying of this software and media is authorized 
  only pursuant to a valid written license from Compaq or an 
  authorized sublicensor. 
 
  Compaq, the Compaq logo, and the Digital logo are registered in the 
  U.S. Patent and Trademark Office. 
 
 
  Starting     Reliable Transaction Router V3.2 for SunOS 
  Installation Verification Procedure 
 
 
IVP: This is not a clean start: 
IVP: Result may be affected by previous settings in shared memory. 
IVP: Result may be affected by existing processes. 
IVP: Result may be affected by locks held by existing processes. 
IVP: Existing pipe files will normally be recycled correctly. 
 
IVP: Any existing journal will be used and modified. 
IVP: Facilities RTR_IVP_FACILITY and RTR will be created. 
IVP: Result may be affected by size and contents of any existing journal. 
IVP: The sample client and server do not necessarily complete 
IVP: if they encounter previously journalled transactions. 
 
IVP: The following question is ignored in a non-interactive install 
IVP: unless NONABI_SCRIPTS=TRUE, see man pkgadd for details... 
IVP: Would you like to abort the IVP? (y/n) 
n 
 
  keeping any existing log file settings (RTR_DBG not set) 
  starting RTR . . . 
  creating a journal, if not already created  . . . 
  creating test facility . . . 
  stopping RTR. 
 
  [OPTIONAL] attempting to compile and link rtr test applications . . . 
 
  If this system is not configured with an application development 
  environment, or the platform does not support threads, then some 
  messages about application compilation not succeeding are normal. 
 
  multithreaded server rtr application compiled 
  single-threaded client rtr application compiled 
  applications rtrreq and rtrsrv available 
  starting rtr and creating default facility 
%RTR-S-RTRSTART, RTR started on node sunbox 
%RTR-S-FACCREATED, facility RTR$DEFAULT_FACILITY created 
  starting an rtr server application 
  running an rtr client application, should complete in a few seconds 
  stopping rtr 
%RTR-S-RTRSTOP, RTR stopped on node sunbox 
 
 © 1999 Compaq Computer Corporation and Digital Equipment Corporation. 
 All rights reserved. 
 
      Reliable Transaction Router V3.2 for SunOS 
 
  Installation Verification Procedure successful

1.5 Installing RTR for AIX

Your Reliable Transaction Router for AIX kit is supplied on :CD-ROM. The Release Notes are also on the :CD-ROM; you are advised to read the Release Notes before using RTR.

The installation requires about 3000KB free disk space. The installation procedure takes about two minutes to complete.

Note
Running RTR on AIX requires that asynchronous I/O (aio) is available. If aio is not available, the following messages appear: 


0509-037 System error - error data is: rtr 
0509-023 Symbol kaio_rdwr in /usr/lib/libc_r.a is not defined. 
0509-023 Symbol listio in /usr/lib/libc_r.a is not defined. 
0509-023 Symbol acancel in /usr/lib/libc_r.a is not defined. 
0509-023 Symbol iosuspend in /usr/lib/libc_r.a is not defined. 
0509-022 Cannot load library librtr_r.a. 
0509-026 System error: Cannot run a file that does not have a valid form


To check for aio, issue the following command: 


$ lsdev -C | grep aio 
aio0       Defined                Asynchronous I/O


To configure aio, use one of the following methods: 


# smit aio 
Configure defined aio 
... mkdev -l aio0 
 
# lsdev -C | grep aio 
aio0       Available              Asynchronous I/O


or 


# mkdev -1 aio0 
# chdev -1 aio0 -P -a autoconfig 
# lsattr -El aio0 -a autoconfig


1.5.1 Installation Procedure
  1. If you have any previous version of RTR, make sure that it is not running:- 


    # rtr stop rtr 
# rtr disconnect server

  2. Become root and invoke the SMIT system management interface tool. You can either type the command smit and navigate through the menus, or type the command with a parameter to start SMIT at a particular menu.
  3. Type smit install_remove or navigate to Remove Software Product and select any previously installed versions of RTR; then remove them. (Check that the "Preview Only" field is set to "No" otherwise the remove does not execute.)
  4. Type smit install_latest or navigate to Install New Software at Latest Level and then select the source media (i.e. the :CD-ROM) from the list. Select RTR.
    After entering OK to the prompts, installation proceeds automatically. If successful, the output looks similar to that shown in Section 1.5.2.

1.5.2 Sample AIX Installation

 


 
+-----------------------------------------------------------------------------+ 
                    Pre-installation Verification... 
+-----------------------------------------------------------------------------+ 
Verifying selections...done 
Verifying requisites...done 
Results... 
 
SUCCESSES 
--------- 
  Filesets listed in this section passed pre-installation verification 
  and will be installed. 
    -- Filesets are listed in the order in which they will be installed. 
    -- The reason for installing each fileset is indicated with a keyword 
       in parentheses and explained by a "Success Key" following this list. 
 
  RTR320.rte x.xx.xxx.x (Selected) 
    Reliable Transaction Router 
 
 
  Success Key: 
  Selected    -- Explicitly selected by user for installation. 
  Maintenance -- Maintenance Level fileset update; being installed 
                 automatically to enable the level of the system to be 
                 tracked. 
  Mandatory   -- Considered to be important to the system; will always 
                 be installed when detected on the installation media. 
  Requisite   -- Requisite of other filesets being installed. 
  P_Requisite -- Previously installed fileset's requisite; being installed 
                 automatically now to ensure system's consistency.  (Only 
                 installed automatically when "auto-install" (-g flag) 
                 is specified.) 
  Supersedes  -- Superseding fileset update; not selected, chosen instead 
                 of an older, selected update.  (Only chosen in this fashion 
                 when "auto-install" is specified (-g flag)). 
 
  << End of Success Section >> 
 
FILESET STATISTICS  
------------------ 
    1  Selected to be installed, of which: 
        1  Passed pre-installation verification 
  ---- 
    1  Total to be installed 
 
+-----------------------------------------------------------------------------+ 
                         Installing Software... 
+-----------------------------------------------------------------------------+ 
 
installp:  APPLYING software for: 
        RTR320.rte x.xx.xxx.x 
 
 
. . . . . << Copyright notice for RTR320 >> . . . . . . . 
# Copyright 1994, 1999  Digital Equipment Corporation. 
# 
# Restricted Rights: Use, duplication, or disclosure by the U.S. Government 
# is subject to restrictions as set forth in subparagraph (c) (1) (ii) of 
# DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, as 
# applicable. 
# 
# This software is proprietary to and embodies the confidential technology 
# of Compaq Computer Corporation and Digital Equipment Corporation. 
# Possession, use, or copying of this software and media is authorized 
# only pursuant to a valid written license from Compaq or an 
# authorized sublicensor. 
# 
# Compaq, the Compaq logo, and the Digital logo are registered in the 
# U.S. Patent and Trademark Office. 
. . . . . << End of copyright notice for RTR320 >>. . . .  
 
New volume on /usr/users/zhang/kit238install/output/usr/sys/inst.images/RTR320: 
Cluster size is 51200 bytes (100 blocks). 
The volume number is 1. 
The backup date is: Fri May 28 14:31:21 EDT 1999 
Files are backed up by name. 
The user is scrtest. 
The number of restored files is 73. 
x            0 ./usr/lpp/RTR320 
x            0 ./usr/lpp/RTR320/bin 
x         2450 ./usr/lpp/RTR320/bin/rtr 
x        10083 ./usr/lpp/RTR320/bin/rtr_rqif 
x         4027 ./usr/lpp/RTR320/bin/rtr_snapshot.sh 
x            0 ./usr/lpp/RTR320/shlib 
x      8048187 ./usr/lpp/RTR320/shlib/librtr_r.a 
x            0 ./usr/lpp/RTR320/lib 
x            0 ./usr/lpp/RTR320/lib/doclib 
x       577269 ./usr/lpp/RTR320/lib/rtr.h 
x            0 ./usr/lpp/RTR320/examples 
x            0 ./usr/lpp/RTR320/examples/rtr 
x        11736 ./usr/lpp/RTR320/examples/rtr/rtrreq.c 
x         8317 ./usr/lpp/RTR320/examples/rtr/rtrsrv.c 
x        11464 ./usr/lpp/RTR320/examples/rtr/crtr.cxx 
x         6139 ./usr/lpp/RTR320/examples/rtr/crtr.hxx 
x          378 ./usr/lpp/RTR320/examples/rtr/cslb.hxx 
x          501 ./usr/lpp/RTR320/examples/rtr/example_cslb.hxx 
x          897 ./usr/lpp/RTR320/examples/rtr/example_srv.cxx 
x          933 ./usr/lpp/RTR320/examples/rtr/example_cli.cxx 
x        13319 ./usr/lpp/RTR320/examples/rtr/rtr_ivp_osf.sh 
x            0 ./usr/lpp/RTR320/mon 
x         3477 ./usr/lpp/RTR320/mon/accfail.mon 
x         7657 ./usr/lpp/RTR320/mon/acp2app.mon 
x         1080 ./usr/lpp/RTR320/mon/active.mon 
x         3926 ./usr/lpp/RTR320/mon/app2acp.mon 
x         2295 ./usr/lpp/RTR320/mon/broadcast.mon 
x        10621 ./usr/lpp/RTR320/mon/calls.mon 
x          955 ./usr/lpp/RTR320/mon/channel.mon 
x         2633 ./usr/lpp/RTR320/mon/connects.mon 
x         6629 ./usr/lpp/RTR320/mon/ddtm.mon 
x         4953 ./usr/lpp/RTR320/mon/dtx.mon 
x         4681 ./usr/lpp/RTR320/mon/dtxrec.mon 
x         1847 ./usr/lpp/RTR320/mon/event.mon 
x         5596 ./usr/lpp/RTR320/mon/facility.mon 
x         4081 ./usr/lpp/RTR320/mon/flow.mon 
x         1432 ./usr/lpp/RTR320/mon/frontend.mon 
x         2546 ./usr/lpp/RTR320/mon/group.mon 
x         3150 ./usr/lpp/RTR320/mon/ipc.mon 
x         3398 ./usr/lpp/RTR320/mon/ipcrate.mon 
x         6375 ./usr/lpp/RTR320/mon/jcalls.mon 
x         4899 ./usr/lpp/RTR320/mon/journal.mon 
x         3873 ./usr/lpp/RTR320/mon/link.mon 
x         2561 ./usr/lpp/RTR320/mon/netbytes.mon 
x         3960 ./usr/lpp/RTR320/mon/netstat.mon 
x        15563 ./usr/lpp/RTR320/mon/rdm.mon 
x         1181 ./usr/lpp/RTR320/mon/partit.mon 
x         1289 ./usr/lpp/RTR320/mon/queues.mon 
x         1276 ./usr/lpp/RTR320/mon/quorum.mon 
x         1502 ./usr/lpp/RTR320/mon/recovery.mon 
x         1372 ./usr/lpp/RTR320/mon/rejects.mon 
x         9108 ./usr/lpp/RTR320/mon/rejhist.mon 
x         1284 ./usr/lpp/RTR320/mon/response.mon 
x         3265 ./usr/lpp/RTR320/mon/rfb.mon 
x         2444 ./usr/lpp/RTR320/mon/rolequor.mon 
x         1796 ./usr/lpp/RTR320/mon/routers.mon 
x         1390 ./usr/lpp/RTR320/mon/routing.mon 
x        48092 ./usr/lpp/RTR320/mon/rscbe.mon 
x         2444 ./usr/lpp/RTR320/mon/rtr.mon 
x         2859 ./usr/lpp/RTR320/mon/stalls.mon 
x         6271 ./usr/lpp/RTR320/mon/system.mon 
x         1786 ./usr/lpp/RTR320/mon/tps.mon 
x         1848 ./usr/lpp/RTR320/mon/tpslo.mon 
x         2844 ./usr/lpp/RTR320/mon/traffic.mon 
x         2018 ./usr/lpp/RTR320/mon/trans.mon 
x         5271 ./usr/lpp/RTR320/mon/v2calls.mon 
x         3873 ./usr/lpp/RTR320/mon/xa.mon 
x            0 ./usr/lpp/RTR320/hlp 
x       726615 ./usr/lpp/RTR320/hlp/rtr.hlb 
x          708 ./usr/lpp/RTR320/hlp/copyright.txt 
x         4425 ./usr/lpp/RTR320/hlp/license.txt 
x       700198 ./usr/lpp/RTR320/hlp/rtr.hlp 
x            0 ./usr/lpp/RTR320/inst_root 
The total size is 10339047 bytes. 
# Copyright 1994, 1999  Digital Equipment Corporation. 
# 
# Restricted Rights: Use, duplication, or disclosure by the U.S. Government 
# is subject to restrictions as set forth in subparagraph (c) (1) (ii) of 
# DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, as 
# applicable. 
# 
# This software is proprietary to and embodies the confidential technology 
# of Compaq Computer Corporation and Digital Equipment Corporation. 
# Possession, use, or copying of this software and media is authorized 
# only pursuant to a valid written license from Compaq or an 
# authorized sublicensor. 
# 
# Compaq, the Compaq logo, and the Digital logo are registered in the 
# U.S. Patent and Trademark Office. 
aio0 Available  Asynchronous I/O 
autoconfig available STATE to be configured at system restart True 
aio0 Available 
aio0 changed 
aio0 Available  Asynchronous I/O 
autoconfig available STATE to be configured at system restart True 
Installation of RTR V3.2 complete 
Finished processing all filesets.  (Total time:  19 secs). 
 
+-----------------------------------------------------------------------------+ 
                                Summaries: 
+-----------------------------------------------------------------------------+ 
 
Installation Summary 
-------------------- 
Name                        Level           Part        Event       Result 
------------------------------------------------------------------------------- 
RTR320.rte                  x.xx.xxx.x      USR         APPLY       SUCCESS     
RTR320.rte                  x.xx.xxx.x      ROOT        APPLY       SUCCESS

1.5.3 Sample IVP Output

The following shows output from an AIX IVP.

Note
Do not run the IVP program on a production system, as it may alter the RTR journal or interrupt processing of transactions. You will be prompted to abort the IVP before it can do any damage. Consider your situation carefully before running the IVP. 


 
  Copyright 1994, 1999 Digital Equipment Corporation. 
 
  Restricted Rights: Use, duplication, or disclosure by the U.S. Government 
  is subject to restrictions as set forth in subparagraph (c) (1) (ii) of 
  DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, as 
  applicable. 
 
  This software is proprietary to and embodies the confidential technology 
  of Compaq Computer Corporation and Digital Equipment Corporation. 
  Possession, use, or copying of this software and media is authorized 
  only pursuant to a valid written license from Compaq or an 
  authorized sublicensor. 
 
  Compaq, the Compaq logo, and the Digital logo are registered in the 
  U.S. Patent and Trademark Office. 
 
 
  Starting     Reliable Transaction Router V3.2 for AIX 
  Installation Verification Procedure 
 
 
IVP: This is not a clean start: 
IVP: Result may be affected by previous settings in shared memory. 
IVP: Result may be affected by existing processes. 
IVP: Result may be affected by locks held by existing processes. 
IVP: Existing pipe files will normally be recycled correctly. 
 
IVP: Any existing journal will be used and modified. 
IVP: Facilities RTR_IVP_FACILITY and RTR will be created. 
IVP: Result may be affected by size and contents of any existing journal. 
IVP: The sample client and server do not necessarily complete 
IVP: if they encounter previously journalled transactions. 
 
IVP: Would you like to abort the IVP? (y/n) 
n 
 
  keeping any existing log file settings (RTR_DBG not set) 
  starting RTR . . . 
  creating a journal, if not already created  . . . 
  creating test facility . . . 
  stopping RTR. 
  [OPTIONAL] attempting to compile and link rtr test applications . . . 
 
  If this system is not configured with an application development 
  environment, or the platform does not support threads, then some 
  messages about application compilation not succeeding are normal. 
 
  multithreaded server rtr application compiled 
  single-threaded client rtr application compiled 
  applications rtrreq and rtrsrv available 
  starting rtr and creating default facility 
%RTR-S-RTRSTART, RTR started on node nodeA 
%RTR-S-FACCREATED, facility RTR$DEFAULT_FACILITY created 
  starting an rtr server application 
  running an rtr client application, should complete in a few seconds 
  stopping rtr 
%RTR-S-RTRSTOP, RTR stopped on node nodeA 
 
 © 1999 Compaq Computer Corporation and Digital Equipment Corporation. 
 All rights reserved. 
 
      Reliable Transaction Router V3.2 for AIX 
 
  Installation Verification Procedure successful

Previous Next Contents