To write C programs using character sets that do not contain all of C's punctuation characters, ANSI C allows the use of nine trigraph sequences in the source file. These three-character sequences are replaced by a single character in the first phase of compilation. (See Section 2.16 for an explanation of compilation phases.) Table 1-1 lists the valid trigraph sequences and their character equivalents.

Table 1-1 Trigraph Sequences

Trigraph Sequence	Character Equivalent
??=	#
??(	[
??/	\
??)	]
??'	^
??<	{
??!	|
??>	}
??-	~

No other trigraph sequences are recognized. A question mark (?) that does not begin a trigraph sequence remains unchanged during compilation. For example, consider the following source line:

printf ("Any questions???/n");

After the ??/ sequence is replaced, this line is translated as follows:

printf ("Any questions?\n");

1.1.2 Digraph Sequences

Digraph processing is supported when compiling in ISO C 94 mode (/STANDARD=ISOC94 on OpenVMS systems).

Digraphs are pairs of characters that translate into a single character, much like trigraphs, except that trigraphs get replaced inside string literals, but digraphs do not. Table 1-2 lists the valid digraph sequences and their character equivalents.

Table 1-2 Digraph Sequences

Digraph Sequence	Character Represented
<:	[
:>	]
<%	{
%>	}
%:	#
%:%:	##

1.2 Identifiers

An identifier is a sequence of characters that represents a name for the following:

• Variable
• Function
• Label
• Type definition
• Structure, enumeration, or union tag
• Structure, enumeration, or union member
• Enumeration constant
• Macro
• Macro parameter

The following rules apply to identifiers:

• Identifiers consist of a sequence of one or more uppercase or lowercase alphabetic characters, the digits 0 to 9, the dollar sign ($), and the underscore character (_).
  Using the $ character provokes a warning from the compiler in strict ANSI mode.
• Character case is significant in identifiers; for example, the identifier Test1 is different from the identifier test1 .
• Identifiers cannot begin with a digit.
• Do not begin identifiers with an underscore; the ANSI C standard reserves these identifiers for internal names.
• Keywords are not identifiers ( Section 1.4 lists the C keywords).
• Using the names of library functions for identifiers is bad practice (Chapter 9 lists the C library function names). A function with the same name as a library function will supersede the library function. This may be the desired outcome, but program maintenance can be confusing.
• In general, identifiers are separated by white space, punctuators, or operators. For example, the following code fragment has four identifiers:

  struct employee { int number; char sex; } emp;

  
  The identifiers are: employee , number , sex , and emp . ( struct , int , and char are keywords).

Identifiers that differ within their significant characters are different identifiers. If two or more identifiers differ in nonsignificant characters only, they are treated as the same identifier.

1.3 Comments

The /* character combination introduces a comment and the */ character combination ends a comment, except within a character constant or string literal.

Comments cannot be nested; once a comment is started, the compiler treats the first occurrence of */ as the end of the comment.

To comment out sections of code, avoid using the /* and */ sequences. Using the /* and */ sequences works only for code sections containing no comments, because comments do not nest. A better method is to use the #if and #endif preprocessor directives, as in the following example:

#if 0 /* This code is excluded from execution because ... */ code_to_be_excluded (); #endif

See Chapter 8 for more information on the preprocessing directives #if and #endif .

Comments cannot span source files. Within a source file, comments can be of any length and are interpreted as white space by both the compiler and the preprocessor.

1.4 Keywords

C defines several keywords, each with special meaning to the compiler. Keywords identify statement constructs and specify basic types and storage classes. Keywords cannot be used as identifiers and cannot be declared.

Table 1-3 lists the C keywords.

==:::::::::::::=

Table 1-3 Keywords

auto	double	int	struct
break	else	long	switch
case	enum	register	typedef
char	extern	return	union
const	float	short	unsigned
continue	for	signed	void
default	goto	sizeof	volatile
do	if	static	while =,==,==,==,==,==,==,==,==,==,==,==,==,=

In addition to the keywords listed in Table 1-3, the compiler reserves all identifiers that begin with two underscores (__) or with an underscore followed by an uppercase letter. User variable names must never begin with one of these sequences.

Keywords are used as follows:

• To assign a storage class to a variable or function ( auto , extern , register , static )
• To construct or qualify a data type ( char , const , double , enum , float , int , long , short , signed , struct , union , unsigned , void , volatile )
• As part of a statement ( break , case , continue , default , do , else , for , goto , if , return , switch , while )
• To define a new named type ( typedef )
• To perform an operation ( sizeof , __typeof__ )

The following VAX C keywords are also sometimes ¹ recognized by the compiler:

_align globaldef globalref globalvalue noshare readonly variant_struct variant_union

The following C99 Standard keywords are also sometimes ² recognized by the compiler:

inline restrict

Use of a keyword as a superfluous macro name is not recommended, but is legal; for example, to change the default size of a basic data type:

#define int short

Here, the keyword int has been redefined as short , which causes all data objects declared with the int data type to be stored as short objects.

1.5 Operators

An operator is a token that specifies an operation on at least one operand, and yields some result (a value, designator, side effect, or some combination). Operands are expressions or constants (a form of expression). Operators with one operand are unary operators, and operators with two operands are binary operators. For example:

x = -b; /* Unary minus operator */ y = a - c; /* Binary minus operator */

Operators with three operands are called ternary operators.

All operators are ranked by precedence, a ranking system determining which operators are evaluated before others in a statement. See Chapter 6 for information on what each operator does and for the rules of operator precedence.

Some operators in C are composed of more than one character, while others are single characters. The single-character operators in C are:

! % ^ & * - + = ~ | . < > / ? : , [ ] ( ) #

The multiple-character operators in C are:

++ -- -> << >> <= >= == != *= /= %= += -= <<= >>= &= ^= |= ## && ||

The # and ## operators can only be used in preprocessor macro definitions. See Chapter 8 for more information on predefined macros and preprocessor directives.

The sizeof operator determines the size of a data type. See Chapter 6 for more information on the sizeof operator.

The old form for compound assignment operators ( =+ , =- , =* , =/ , =% , =<< , =>> , =& , =^ , and =| ) is not supported by the ANSI C standard. Use of these operators in a program is unsupported, and will produce unpredictable results. For example:

x =-3;

This construction means x is assigned the value -3 , not x is assigned the value x - 3 .

The error-checking compiler option provides a warning message when the old form of compound assignment operators is encountered.

1.6 Punctuators

Some characters in C are used as punctuators, which have their own syntactic and semantic significance. Punctuators are not operators or identifiers. Table 1-4 lists the C punctuators.

Table 1-4 Punctuators

Punctuator	Use	Example
< >	Header name	<limits.h>
[ ]	Array delimiter	char a[7];
{ }	Initializer list, function body, or compound statement delimiter	char x[4] = {'H', 'i', '!', '\0' };
( )	Function parameter list delimiter; also used in expression grouping	int f (x,y)
*	Pointer declaration	int *x;
,	Argument list separator	char x[4] = { 'H', 'i', '!', '\0'};
:	Statement label	labela: if (x == 0) x += 1;
=	Declaration initializer	char x[4] = { "Hi!" };
;	Statement end	x += 1;
...	Variable-length argument list	int f ( int y, ...)
#	Preprocessor directive	#include <limits.h>
' '	Character constant	char x = 'x';
" "	String literal or header name	char x[] = "Hi!";

The following punctuators must be used in pairs:

< >
[ ]
( )
' '
" "
{ }

Some characters can be used either as a punctuator or as an operator, or as part of an operator. The context of the occurrence specifies the meaning. Punctuators usually delineate a specific type of C construct, as shown in Table 1-4.

1.7 String Literals

Strings are sequences of zero or more characters. String literals are character strings surrounded by quotation marks. String literals can include any valid character, including white-space characters and character escape sequences. Once stored as a string literal, modification of the string leads to undefined results.

In the following example, ABC is the string literal. It is assigned to a character array where each character in the string literal is stored as one array element. Storing a string literal in a character array lets you modify the characters of the array.

char x[] = "ABC";

String literals are typically stored as arrays of type char (or wchar_t ) if prefaced with an L , and have static storage duration.

The following declaration declares a character array to hold the string "Hello!":

char s[] = "Hello!";

The character array s is initialized with the characters specified in the double quotation marks, and terminated with a null character ( \0 ) . The null character marks the end of each string, and is automatically concatenated to the end of the string literal by the compiler. Adjacent string literals are automatically concatenated (with a single null character added at the end) to reduce the need for the line continuation character (the backslash at the end of a line).

Following are some valid string literals:

"" /* Here's a string with only the null character */ "You can have many characters in a string." "\"You can mix characters and escape sequences.\"\n" "Long lines of text can be continued on the next line \ by using the backslash character at the end of a line." "Or, long lines of text can be continued by using " "ANSI's concatenation of adjacent string literals." "\'\n" /* Only escape sequences are in this string */

To determine the length of a given string literal (not including the null character), use the strlen function. See Chapter 9 for more information on other library routines available for string manipulation.

1.8 Constants

There are four categories of constants in C:

• Integer constants (such as 63 , 0 , and 42L )
• Floating-point constants (such as 1.2 , 0.00 , and 77E+2 )
• Character constants (such as 'A' , '0' , and L'\n' )
• Enumeration constants (such as enum boolean { NO, YES }; ), where NO and YES are the enumeration constants

The following sections describe these constants.

The value of any constant must be within the range of representable values for the specified type. Regardless of its type, a constant is a literal or symbolic value that does not change. A constant is also an rvalue, as defined in Section 2.14.

privacy and legal statement