The #if directive has the following syntax:

#if constant-expression newline

This directive checks whether the constant-expression is true (nonzero). The operand must be a constant integer expression that does not contain any increment (++), decrement (-- --), sizeof , pointer (*), address (&), and cast operators.

Identifiers in the constant expression either are or are not macro names. There are no keywords, enumeration constants, and so on. The constant expression can also include the defined preprocessing operator (see Section 8.2.7).

The constant expression in an #if directive is subject to text replacement and can contain references to identifiers defined in previous #define directives. The replacement occurs before the expression is evaluated. Each preprocessing token that remains after all macro replacements have occurred is in the lexical form of a token.

If an identifier used in the expression is not currently defined, the compiler treats the identifier as though it were the constant zero.

8.2.2 The #ifdef Directive

The #ifdef directive has the following syntax:

#ifdef identifier newline

This directive checks whether the identifier is currently defined. Identifiers can be defined by a #define directive or on the command line. If such identifiers have not been subsequently undefined, they are considered currently defined.

8.2.3 The #ifndef Directive

The #ifndef directive has the following syntax:

#ifndef identifier newline

This directive checks to see if the identifier is not currently defined.

8.2.4 The #else Directive

The #else directive has the following syntax:

#else newline

This directive delimits alternative source text to be compiled if the condition tested for in the corresponding #if , #ifdef , or #ifndef directive is false. An #else directive is optional.

8.2.5 The #elif Directive

The #elif directive has the following syntax:

#elif constant-expression newline

The #elif directive performs a task similar to the combined use of the else-if statements in C. This directive delimits alternative source lines to be compiled if the constant expression in the corresponding #if , #ifdef , #ifndef , or another #elif directive is false and if the additional constant expression presented in the #elif line is true. An #elif directive is optional.

8.2.6 The #endif Directive

The #endif directive has the following syntax:

#endif newline

This directive ends the scope of the #if , #ifdef , #ifndef , #else , or #elif directive.

The number of necessary #endif directives changes according to whether the elif or #else directive is used. Consider the following equivalent examples:

#if true #if true . . . . . . #elif true . . #else . #if false . . #endif . . #endif #endif

8.2.7 The defined Operator

Another way to verify that a macro is defined is to use the defined unary operator. The defined operator has one of the following forms:

defined name

defined (name)

An expression of this form evaluates to 1 if name is defined and to 0 if it is not.

The defined operator is especially useful for checking many macros with just a single use of the #if directive. In this way, you can check for macro definitions in one concise line without having to use many #ifdef or #ifndef directives.

For example, consider the following macro checks:

#ifdef macro1 printf( "Hello!\n" ); #endif #ifndef macro2 printf( "Hello!\n" ); #endif #ifdef macro3 printf( "Hello!\n" ); #endif

Another use of the defined operator is in a single #if directive to perform similar macro checks:

#if defined (macro1) || !defined (macro2) || defined (macro3) printf( "Hello!\n" ); #endif

Note that defined operators can be combined in any logical expression using the C logical operators. However, defined can only be used in the evaluated expression of an #if or #elif preprocessor directive.

8.3 File Inclusion (#include)

The #include directive inserts the contents of a specified file into the text stream delivered to the compiler. Usually, standard headers and global definitions are included in the program stream with the #include directive. This directive has two forms:

#include "filename" newline

#include <filename> newline

The format of filename is platform-dependent. If the filename is enclosed in quotation marks, the search for the named file begins in the directory where the file containing the #include directive resides. If the file is not found there, or if the file name is enclosed in angle brackets (< >), the file search follows platform-defined search rules. In general, the quoted form of #include is used to include files written by users, while the bracketed form is used to include standard library files.

See your platform-specific Compaq C documentation for information on the search path rules used for file inclusion.

Macro substitution is allowed within the #include preprocessor directive.

For example, the following two directives can be used to include a file:

#define macro1 "file.ext" #include macro1

Defined macros used in #include directives must evaluate to one of the two following acceptable #include file specifications or an error is reported:

"filename"

<filename>

An included file may itself contain #include directives. Although the Compaq C compiler imposes no inherent limitation on the nesting level of inclusion, the permitted depth depends on hardware and operating system restrictions.

8.4 Explicit Line Numbering (#line)

The compiler keeps track of information about line numbers in each file involved in the compilation, and uses the line number when issuing diagnostic messages to the terminal or, when compiling in batch mode, to a log file.

The #line directive can be used to alter the line numbers assigned to source code. This directive gives a new line number to the following line, which is then incremented to derive the line number for subsequent lines. The directive can also specify a new file specification for the program source file. The #line directive does not change the line numbers in your compilation listing, only the line numbers given in diagnostic messages sent to the terminal screen or log file. This directive is useful for referring to original source files that are preprocessed into C code.

The #line directive has three forms:

#line integer-constant newline

#line integer-constant "filename" newline

#line pp-tokens newline

In the first two forms, the compiler gives the line following a #line directive the number specified by the integer constant. The optional filename in quotation marks indicates the name of the source file that the compiler will provide in its diagnostic messages. If the file name is omitted, the file name used is the name of the current source file or the last file name specified in a previous #line directive.

In the third form, macros in the #line directive are expanded before it is interpreted. This allows a macro call to expand into the integer-constant, filename, or both. The resulting #line directive must match one of the other two forms, and is then processed as appropriate.

8.5 Implementation-Specific Preprocessor Directive (#pragma)

The #pragma directive is a standard method for implementing platform-dependent features. This directive has the following syntax:

#pragma pp-tokensopt newline

The supported pragmas vary across platforms. All unrecognized pragmas are diagnosed with an informational message. See your platform-specific Compaq C documentation for a list of supported pragmas.

Some pragma directives are subject to macro expansion. A macro reference can occur anywhere after the keyword pragma . For example:

#define opt inline #define f func #pragma opt(f)

After both macros are expanded, the #pragma directive becomes #pragma inline (func) .

The following pragmas are subject to macro expansion:

builtins inline linkage standard dictionary noinline module nostandard extern_model member_alignment message use_linkage extern_prefix nomember_alignment

The following pragmas are also subject to macro expansion, primarily for use in preprocess-only mode (that is, with the /PREPROCESS_ONLY qualifier on OpenVMS systems or the -E switch on Tru64 UNIX systems), and are not normally used when generating an object module with the Compaq C compiler:

• _KAP ---Relevant only to the KAPC product.
• define_template ---Relevant only to Compaq C++.
• code_psect
• linkage_psect

The following describes how the compiler decides whether or not to macro-expand a given pragma:

In compilation modes other than /STANDARD=COMMON (OpenVMS systems) or -std0 (Tru64 UNIX systems), do Step 1:

Step 1:

The token following the keyword pragma is first checked to see if it is a currently-defined macro. If it is a macro and the identifier does not match the name of a pragma that is not subject to macro expansion, then just that macro (with its arguments, if function-like) is expanded. The tokens produced by that macro expansion are then processed along with the rest of the tokens on the line in Step 2.

In all compilation modes, do Step 2:

Step 2:

The first token following the keyword pragma is checked to see if it matches the name of a pragma that is subject to macro expansion. If it does, then macro expansion is applied to that token and to the rest of tokens on the line.

The test for matching a known pragma permits an optional double leading underscore. For example, #pragma __nostandard is equivalent to #pragma standard .

Example

The following example illustrates that for pragmas coded directly with a name that matches a known pragma, the macro-expansion behavior is generally the same in all modes and is backward-compatible. It is only in cases where a pragma was coded with a name that was not the name of a known pragma, expecting macro expansion to produce the pragma name, that backward-compatibility is broken, and then only in common mode. The exception is made in common mode to maintain compatibility with the Tru64 UNIX preprocessor.

#define pointer_size error #define m1 e1 #define e1 pointer_size 32 #define standard message #define x disable(all) #define disable(y) enable(y) #pragma pointer_size 32 /* In common mode, Step 1 skipped. In other modes, Step 1 finds that pointer_size is known not to expand. In any mode, Step 2 finds pointer_size is not a pragma requiring expansion. */ #pragma m1 /* In common mode, Step 1 skipped. In other modes, Step 1 expands m1 to pointer_size 32. In common mode, Step 2 finds m1 is not a pragma requiring expansion. In other modes, Step 2 finds pointer_size is not a pragma requiring expansion. */ #pragma standard x /* In common mode, Step 1 skipped. In other modes, Step 1 expands to message x. In common mode, Step 2 expands to message enable(all). In other modes, Step 2 expands message x to message enable(all). */

8.6 Error Directive (#error)

The #error preprocessor directive issues a diagnostic message and ends compilation. This directive has the following syntax:

#error messageopt newline

8.7 Null Directive (#)

A preprocessing directive of the form # newline is a null directive and has no effect.

8.8 Predefined Macro Names

The following sections describe the predefined macro names that are provided to assist in transporting code and performing simple tasks common to many programs.

8.8.1 The __DATE__ Macro

The __DATE__ macro evaluates to a string literal specifying the date on which the compilation started. The date has the following format:

"Mmm dd yyyy"

The names of the months are the same as those generated by the asctime library function. The first d is a space if dd is less than 10. For example:

printf("%s",_ _DATE_ _);

The value of this macro remains constant throughout the translation unit.

8.8.2 The __FILE__ Macro

The __FILE__ macro evaluates to a string literal specifying the file specification of the current source file. For example:

printf("file %s", _ _FILE_ _);

8.8.3 The __FUNC__ Macro

The __FUNC__ macro evaluates to a static array of char initialized with the spelling of the function's name. It is visible anywhere within the body of a function definition.

For example, a function defined as follows will print "f1".

void f1(void) {printf("%s\n", __FUNC__);}

8.8.4 The __LINE__ Macro

The __LINE__ macro evaluates to a decimal constant specifying the number of the line in the source file containing the macro reference. For example:

printf("At line %d in file %s", _ _LINE_ _, _ _FILE_ _);

8.8.5 The __TIME__ Macro

The __TIME__ macro evaluates to a string specifying the time that the compilation started. The time has the following format (the same as the asctime function):

hh:mm:ss

For example:

printf("%s", _ _TIME_ _);

The value of this macro remains constant throughout the translation unit.

8.8.6 The __STDC__ Macro

The __STDC__ macro evaluates to the integer constant 1, which indicates a conforming implementation.

The value of this macro remains constant throughout the translation unit.

8.8.7 System-Identification Macros

See your platform-specific Compaq C documentation for a list of the system-identification macros.

privacy and legal statement