Compaq Advanced Server for OpenVMS
Server Administrator's Guide

You can display events recorded in the event log file in either of the following ways:

• If the Advanced Server is running, use the ADMINISTER command SHOW EVENTS.
• If the Advanced Server is not running, use the ELFREAD utility.

These methods are described below.

6.1.3.1.1 Displaying Events When the Advanced Server Is Running

The following example shows how to display events while the Advanced Server is running, using the SHOW EVENTS command. Use the /TYPE qualifier to specify one of the types of events, as follows: SYSTEM (default), SECURITY, or APPLICATION. In this example, the SHOW EVENTS command displays the system events.

LANDOFOZ\\TINMAN> SHOW EVENTS T Date Time Source Category Event User Computer - -------- ----------- ------- ----------- ----- ---- ----------- I 08/26/98 11:49:56 AM SYSTEM None 528 N/A TINMAN W 08/27/98 12:07:01 PM Eventlog None 603 N/A TINMAN I 08/27/98 12:15:31 PM Print None 604 N/A TINMAN W 08/27/98 12:46:31 PM BROWSER None 605 N/A TINMAN Total of 4 events LANDOFOZ\\TINMAN>

You can display detailed information for each event, as generated by the application that was the source of the event record, by specifying the SHOW EVENTS/FULL command. The information might include such additional information as the domain and system names. Not all sources or events generate event details. The following example shows a portion of the data that might be displayed with the SHOW EVENTS/FULL command:

E 06/17/00 12:13:50 PM NETLOGON None 5513 N/A TINMAN NET5513: The computer DOROTHY tried to connect to the server TINMAN using the trust relationship established by the LANDOFOZ domain. However, the computer lost the correct security identifier (SID) when the domain was reconfigured. Reestablish the trust relationship. E 06/17/00 12:13:48 PM NETLOGON None 5513 N/A TINMAN NET5513: The computer DOROTHY tried to connect to the server TINMAN using the trust relationship established by the LANDOFOZ domain. However, the computer lost the correct security identifier (SID) when the domain was reconfigured. Reestablish the trust relationship. E 06/17/00 12:13:48 PM NETLOGON None 5513 N/A TINMAN NET5513: The computer DOROTHY tried to connect to the server TINMAN using the trust relationship established by the LANDOFOZ domain. However, the computer lost the correct security identifier (SID) when the domain was reconfigured. Reestablish the trust relationship. . . .

6.1.3.1.2 Displaying Events When the Advanced Server Is Not Running

To display events when the Advanced Server is not running, use the ELFREAD utility. The ELFREAD utility allows you to display records in the event file in the following ways:

• In reverse chronological order (default)
• In chronological order

You can view records in brief (default) or detail format.

The ELFREAD command is defined as part of the Advanced Server command set in the SYS$STARTUP:PWRK$DEFINE_COMMANDS.COM command procedure.

The syntax for the ELFREAD command is:

ELFREAD [-o] [-d] event-type

Use the optional parameters to control the ELFREAD output as described in Table 6-4, ELFREAD Command Options.

Table 6-4 ELFREAD Command Options

To display...	Include:
Records in chronological order	-o
Detail records	-d
event-type	The event log file specified, one of the following: SYSTEM SECURITY APPLICATION

6.1.3.2 Saving and Clearing the Event Logs

You can display the event logs and, when necessary, clear the event logs. The Alerter service sends you a message advising you when an event log becomes 80% or more full. When an event file is full, no additional event logging will take place until the event file is cleared. Before clearing an event file, you should save it to a backup file for future reference. The maximum size of an event file is specified by server configuration parameters in the OpenVMS Registry. The server parameter controlling the event log file size is stored in the key associated with each event log and is called MaxSize. (See Appendix A, Server Configuration Parameters, for more information.)

When an event log becomes full, you can save and clear the event log:

• Saving an event log causes the current event log entries to be written to a specified archive file on the local computer.
• Clearing an event log causes the current event log entries to be deleted.

To save an event log, use the SAVE EVENTS command. The event log is stored, using the file name and location that you specify in the command line. For example, to save the Security event log to the file SEVENTS.BKP, enter the following command:

LANDOFOZ\\TINMAN> SAVE EVENTS SEVENTS.BKP/TYPE=SECURITY %PWRK-S-ELFSAVE, Security Event Log from server "TINMAN" saved LANDOFOZ\\TINMAN>

If you do not specify a path as part of the file name, the event file is created in the PWRK$LMLOGS: directory. You can save the event log file of a remote Advanced Server by specifying the server name with the /SERVER qualifier, as in the following example:

LANDOFOZ\\TINMAN> SAVE EVENTS SYSTEM.BKP/TYPE=SYSTEM/SERVER=DOROTHY %PWRK-S-ELFSAVE, System Event Log from server "DOROTHY" saved

This saves the system event log file of server DOROTHY to the file PWRK$LMLOGS:SYSTEM.BKP on server DOROTHY.

You can display the saved event file by using the ADMINISTER SHOW EVENTS /TYPE command, specifying the event file name and location and the types of events to be viewed. See Section 6.1.3.1.1, Displaying Events When the Advanced Server Is Running.

6.1.3.2.2 Clearing an Event Log

To clear an event log, enter the CLEAR EVENTS command. The specified event log entries are deleted. For example:

LANDOFOZ\\TINMAN> CLEAR EVENTS/TYPE=SECURITY Clear the Security Event Log [YES or NO] (YES) : YES %PWRK-S-ELFCLEARED, Security Event Log on server "TINMAN" cleared

If you do not specify the event log type, the default is to clear the system event log.

6.1.3.3 Auditing Security Events Domain-Wide

The Advanced Server can track selected activities of users by auditing security events and then placing entries in a server's security log. You must enable auditing in order for the server to record security events. By default, auditing is not enabled.

To enable auditing, you must use the SET AUDIT POLICY command, as documented in Section 6.1.3.3.1, Enabling Security Event Auditing. You can use the command to establish an audit policy for the entire domain. (The command affects the security logs of the domain controller and of all server domain controllers in the domain: they all share the same audit policy. Member servers maintain their own auditing policy.) You can select any of several types of security events to be logged in the domain. For example, you can log:

• A systemwide event such as a user logging on or off
• An attempt by a user to access a specific directory or file
• An attempt by a user to rename a user account or change a password

You can select whether successful or unsuccessful attempts at specific operations are to generate event messages.

For more information on setting an auditing policy, see Section 6.1.3.4, Establishing the Audit Policy.

6.1.3.3.1 Enabling Security Event Auditing

To enable auditing on the server, use the SET AUDIT POLICY command with the /AUDIT qualifier. For example:

LANDOFOZ\\TINMAN> SET AUDIT POLICY/AUDIT %PWRK-S-AUDPOLSET, audit policy set for domain "LANDOFOZ"

6.1.3.3.2 Disabling Auditing

To disable auditing on the domain, use the SET AUDIT POLICY command with the /NOAUDIT qualifier.

6.1.3.4 Establishing the Audit Policy

The audit policy defines the types of events to be included in the Security event log. You can change the audit policy for the domain using the SET AUDIT POLICY command.

The SET AUDIT POLICY command lets you specify event results for which auditing is enabled, including both successful and failed attempts to perform certain functions. Include the /SUCCESS qualifier to specify successful completion of operations, and the /FAILURE qualifier to specify failed operations.

The following list shows the events you can specify:

• All events
• None of the events
• Attempts to access a directory or file set for auditing or to send a print job to a shared print queue set for auditing
• Attempts to create, change, and delete user accounts and groups; attempts to rename, disable, and enable a user account; attempts to set or change a password
• Attempts to log on to the domain, log off the domain, and make server connections
• Attempts to change user rights policies, auditing policies, or trust relationships
• Attempts to invoke a program, and handle duplication, indirect accesses, and process exits
• Attempts to restart or shut down the system, and events that affect system security or the security log
• Attempts to exercise a user right (except those associated with logging on and logging off)

For more information about using the SET AUDIT POLICY command, refer to the Compaq Advanced Server for OpenVMS Commands Reference Manual or the ADMINISTER command interface online help.

6.1.3.4.1 Example: Setting the Audit Policy

The following example shows how to use the SET AUDIT POLICY command to log all failures of logon and logoff attempts:

LANDOFOZ\\TINMAN> SET AUDIT POLICY/AUDIT/FAILURE=(LOGONOFF) %PWRK-S-AUDPOLSET, audit policy set for domain "LANDOFOZ" LANDOFOZ\\TINMAN>

6.1.3.5 Displaying the Audit Policy

To display the audit policy, enter the SHOW AUDIT POLICY command. This displays the audit policy currently established for the server. For example:

LANDOFOZ\\TINMAN> SHOW AUDIT POLICY Audit Policy for domain "LANDOFOZ": Auditing is currently Enabled. Audit Event states: Audit Event Success Failure ------------------ -------- -------- ACCESS Disabled Disabled ACCOUNT_MANAGEMENT Disabled Disabled LOGONOFF Disabled Enabled POLICY_CHANGE Disabled Disabled PROCESS Disabled Disabled SYSTEM Disabled Disabled USER_RIGHTS Disabled Disabled LANDOFOZ\\TINMAN>

6.1.3.6 Setting and Displaying Security Event Auditing for Files and Directories

You can set and display the audit trail for a specific file or directory using the SET FILE and SHOW FILE commands.

Use the SET FILE command with the /AUDIT qualifier to specify the events to audit.

The following list shows the types of operations you can audit for files and directories:

• All events
• Attempts to display file names, attributes, permissions, owner, or data
• Attempts to create subdirectories and files, change attributes, and display permissions and owner
• Attempts to display attributes, permissions, and owner; attempts to change subdirectories; and attempts to run program files
• Attempts to delete a directory or file
• Attempts to change directory or file permissions
• Attempts to change directory or file ownership

For more information about using the SET FILE command, refer to the Compaq Advanced Server for OpenVMS Commands Reference Manual or the ADMINISTER command interface online help.

For example, to set auditing of operations on the user file SIMIANS.DAT, enter the following command:

LANDOFOZ\\TINMAN> SET FILE \WITCH\MKEY\SIMIANS.DAT- _LANDOFOZ\\TINMAN>/AUDIT=(SUCCESS=ALL,FAILURE=ALL) %PWRK-S-FILEMOD, "\\TINMAN\WITCH\MKEY\SIMIANS.DAT" modified %PWRK-S-FILESMODIFIED, total of 1 file modified LANDOFOZ\\TINMAN>

6.1.3.6.1 Example: Displaying the Audit Settings for a File

The following example shows how to display the audit settings for a file, using the SHOW FILES /AUDIT command:

LANDOFOZ\\TINMAN> SHOW FILES \WITCH\MKEY\SIMIANS.DAT/AUDIT \\TINMAN \WITCH\MKEY\SIMIANS.DAT SIMIANS.DAT Audit Events: Success Failure LION RWXDPO RWXDPO Total of 1 file LANDOFOZ\\TINMAN>

6.1.4 Advanced Server Log Files

The Advanced Server records several types of messages in log files in the following locations:

• PWRK$LOGS:, the logical name for the directory PWRK$COMMONROOT:[LOGS]
• PWRK$LMLOGS:, the logical name for the directory
  PWRK$LMROOT:[LANMAN.LOGS]

Table 6-5, Log File Names, lists the log files kept in the PWRK$LOGS and PWRK$LMLOGS areas. In each case, nodename refers to the name of the server node.

Table 6-5 Log File Names

Log File Name	Message Type
In PWRK$LOGS:
NETBIOS_ nodename.LOG	NetBIOS protocol over DECnet
NETBIOS_ERROR.LOG	NetBIOS protocol over DECnet error
NETBIOS_OUTPUT.LOG	NetBIOS protocol over DECnet output
PWRK$CONFIG_INFO_ nodename.LOG	Configuration information
PWRK$CONFIG_ERROR_ nodename.LOG	Configuration errors
PWRK$KNBDAEMON_ nodename.LOG	NetBIOS protocol over TCP/IP
PWRK$LICENSE_R_ nodename.LOG	License Registrar
PWRK$LICENSE_REGISTRAR_ nodename.LOG	License Registrar
PWRK$LICENSE_S_ nodename.LOG	License Server
PWRK$LICENSE_SERVER_ nodename.LOG	License Server
PWRK$MASTER_ nodename.LOG	Master process (process start and shutdown)
PWRK$NBDAEMON_ nodename.LOG	NetBIOS protocol over NetBEUI
In PWRK$LMLOGS:
PWRK$ADMIN_ n _ nodename .LOG	Remote task command
PWRK$LMMCP_ nodename. LOG	Master control process
PWRK$LMSRV_ nodename.LOG	File server process
PWRK$LMBROWSER_ nodename.LOG	Browser
PWRK$UPGRADE.LOG	Upgrade utility

6.1.4.1 Displaying Log Files

You can use any ASCII text editor to look at log files, so long as the log files are not open (that is, in use by the Advanced Server). Even if open, most log files can be read using the TYPE command. A convenient way to view the end of most log files is to include the /TAIL and /PAGE qualifiers with the TYPE command, as in the following example, where nodename is the name of the server node:

$ TYPE/TAIL=50/PAGE PWRK$LMLOGS:PWRK$LMSRV_nodename.LOG

The log files record messages that have occurred during server operation. Not all the messages in the log need your attention. Many messages are caused by communication problems from which the server recovers automatically. If the server fails to recover from a problem, log files can provide you with information about the cause of the problem.

You can examine messages recorded in any log file. Each line in a log file provides information about logged entries, including a date and time stamp. For example, the PWRK$LMSRV_nodename.LOG file might contain information about cache exhaustion conditions.

To examine log files that are in use, use the OpenVMS DCL command BACKUP/IGNORE=INTERLOCK to back them up to a text file, as in the following example:

$ BACKUP/IGNORE=INTERLOCK PWRK$LOGS:NETBIOS_DOROTHY.LOG;- _$ PWRK$LOGS:NETBIOS_DOROTHY.TXT

6.1.4.2 The Advanced Server Common Event Log

The Advanced Server provides its own common event log for recording events that cannot be recorded in the System, Security, or Application event logs. These events include process startup and shutdown, autoshare errors, problems caused by underlying OpenVMS errors (such as disk quota exceeded), and failed attempts to connect because of licensing problems.

The Advanced Server provides the ADMIN/ANALYZE utility for viewing events in Advanced Server common event log files. The events are logged in the file PWRK$COMMON:EVTLOG.DAT on each server.

To view output or to purge the EVTLOG.DAT file, enter the following command:

$ ADMINISTER/ANALYZE

Table 6-6, Event Logger Command Qualifiers, lists the qualifiers you can use with the ADMINISTER/ANALYZE command.

Table 6-6 Event Logger Command Qualifiers

Qualifier	Description
/AFTER= dd-mmm-yy hh:mm:ss.cc	Restricts the report or the purge operation to events after the specified time.
/BEFORE= dd-mmm-yy hh:mm:ss.cc	Restricts the report or the purge operation to events before the specified time.
/CLASS= event_class	Filters the logged events that are written to the report or purged from the EVTLOG.DAT file. The available classes are: ALL---all events; the default ERROR---events that affect server operation, but are not necessarily fatal WARNING---events that do not directly affect server operation; informational
/FULL or /BRIEF	The /FULL qualifier generates a report that includes all information logged for each event. The /BRIEF qualifier outputs only the event header and is the default.
/INPUT= event_log_file	Specifies the name of the event log file. The default file is: SYS$SYSDEVICE:[PWRK$ROOT]EVTLOG.DAT
/OUTPUT= report_file	Specifies the name of the output file you want the report written to. The default output is written to SYS$OUTPUT.
/PID= pid	Specifies the process ID whose events you want to display.
/PURGE	Purges entries from the EVTLOG.DAT file on the local server. If you use the /PURGE qualifier without other qualifiers, all entries are purged and EVTLOG.DAT file is empty. You can use /PURGE with other qualifiers to specify which entries you want to purge. For example, to purge all events in the EVTLOG.DAT file on the server that are classed as ERROR and written to the file before October 1, 2000, enter the following command: $ ADMIN/ANALYZE/PURGE/CLASS=ERROR/BEFORE=01-OCT-2000
/SOURCE= event_source	Filters the logged events that are written to the report or purged from the EVTLOG.DAT file. The available sources are: ALL---includes events from all sources; this is the default COMMON_SERVICES---events originating from common components, such as the PATHWORKS lock manager and PATHWORKS file system LAN_MANAGER---events originating from LAN Manager LICENSE_MANAGER---events originating from the license management utility MANAGEMENT---events originating from the Monitor process or Configurator MASTER_PROCESS---events originating from the master process, PWRK$MASTER TRANSPORT---events originating from any of the transports

Example 6-1, ADMINISTER/ANALYZE Command and Display, shows a sample report from the Event logger generated by the following command executed on the server TINMAN.

Example 6-1 ADMINISTER/ANALYZE Command and Display

$ ADMINISTER/ANALYZE/INPUT=EVTLOG.DAT :::::::::: PATHWORKS Error Log Report :::::::::: DATE: 25-OCT-2000 15:52:06.88 ================= EVENT #1 ================== Event Time: 18-OCT-2000 17:14:09.04 Node: TINMAN Process Id: 000001DB Event: Master Process starting Event Source: Master Process Event Class: Audit Process Id: 000001DB(X) ================= EVENT #2 ================== Event Time: 18-OCT-2000 17:14:19.57 Node: TINMAN Process Id: 000001DB Event: NetBEUI Daemon process starting Event Source: Master Process Event Class: Audit Process Id: 000002DE(X) ================= EVENT #3 ================== Event Time: 18-OCT-2000 17:14:23.26 Node: TINMAN Process Id: 000001DB Event: NetBEUI Daemon process shutting down Event Source: Master Process Event Class: Audit Process Id: 000002DE(X) Status: SYSTEM-S-NORMAL, normal successful completion ================= EVENT #4 ================== Event Time: 18-OCT-2000 17:14:29.04 Node: TINMAN Process Id: 000001DB Event: NetBIOS transport process starting Event Source: Master Process Event Class: Audit Process Id: 00000262(X) ================= EVENT #5 ================== Event Time: 18-OCT-2000 17:14:37.19 Node: TINMAN Process Id: 000001DB Event: LANman Controller process starting Event Source: Master Process Event Class: Audit Process Id: 00000282(X) ================= EVENT #6 ================== Event Time: 18-OCT-2000 17:14:50.93 Node: TINMAN Process Id: 000001DB Event: License Registrar process starting Event Source: Master Process Event Class: Audit Process Id: 000002D1(X) . . . ================= EVENT #19 ================== Event Time: 19-OCT-2000 09:23:34.63 Node: TINMAN Process Id: 000003DE Event: No license for client - access denied Event Source: LAN Manager Server Event Class: Warning Client: PCGURU . . . =============== EVENT #25 =================== Event Time: 19-OCT-2000 10:38:11.85 Node: TINMAN Process Id: 555749340 Event: Unexpected System Error Encountered Event Source: PATHWORKS Printing Services Event Class: Error

Example 6-2, ADMINISTER/ANALYZE/FULL Command and Display, shows a portion of the more detailed report generated when you use the /FULL qualifier.

Example 6-2 ADMINISTER/ANALYZE/FULL Command and Display

$ ADMINISTER/ANALYZE/FULL/INPUT=EVTLOG.DAT :::::::::: PATHWORKS Error Log Report :::::::::: DATE: 25-OCT-2000 15:52:06.88 ================= EVENT #1 ================== Event Time: 18-OCT-2000 17:14:09.04 Node: TINMAN Process Id: 555749340 Event: PATHWORKS Lock Database is 90% full Event Source: Common Services PLM Event Class: Warning 0x00000032 Total Database Resources: 50 0x0000002D Current Resources in Use: 45 0x00000019 Currently open Streams: 25 0x00000017 Currently unique Opens: 23 0x00000004 Currently Locked Ranges: 4 Decode information unavailable (Hex. output): 0x62426141 0x64446343 0x66466545 0x68486747 0x00006949 . . .