BASEstar^tm Open DAS
for Modicon®
on OpenVMS^tm
Installation and User's Guide

Example 2-4 and Example 2-5 are samples of the ODS and BSTR configuration files for the DAS for Modicon programmable controllers.

Example 2-4 ODS Configuration File

$ ! $ !********************************************************************! $ ! ! $ ! This is a template for the Modicon-specific ! $ ! ODS configuration command file. Rename and edit this command ! $ ! procedure template to reflect your site-specific ! $ ! configuration. You must manually execute this command ! $ ! procedure to configure ODS to provide line configuration ! $ ! information for your devices. ! $ ! ! $ ! Add comments to the site-specific changes here. ! $ ! ! $ !********************************************************************! $ ! $ODSCL := $ODS:[EXE]ODSCL.EXE $ ! $ ! Register the ODS definitions. $ ! $ODSCL REGISTER DIRECTORY NAME "/LINE=MODBUS_LINE" ATTRIBUTES "OC=MODBUS_LINE /PORT=LTA207:/RETRIES=3/SPEED=9600/PARITY=none/MODEM=0/TIMEOUT=3/TRACE=0" REGISTER DIRECTORY NAME "/LINE=MODPLUS_LINE" ATTRIBUTES "OC=MODPLUS_LINE /PORT=MPA1:/RETRIES=2/TIMEOUT=2/TRACE=0" REGISTER DIRECTORY NAME "/PATH=MOD984_PATH" ATTRIBUTES "OC=MODBUS_PATH /LINE_NAME=(/LINE=MODBUS)/SLAVE_ADDRESS=20" REGISTER DIRECTORY NAME "/PATH=MODPLUS984_SLAVE_PATH" ATTRIBUTES "OC=MODPLUS_SLAVE_PATH/LINE_NAME=(/LINE=MODPLUS_LINE) /SLAVE_ROUTING=03.00.00.00.00/TRACE=0" REGISTER DIRECTORY NAME "/PATH=MODPLUS984_NODE_PATH" ATTRIBUTES "OC=MODPLUS_NODE_PATH/LINE_NAME=(/LINE=MODPLUS_LINE)/NODE_ADDRESS=4/TRACE=0" REGISTER DIRECTORY NAME "/PATH=MOD884_PATH" ATTRIBUTES "OC=MODBUS_PATH /LINE_NAME=(/LINE=MODBUS)/SLAVE_ADDRESS=21/TRACE=0" REGISTER DIRECTORY NAME "/PATH=MOD584_PATH" ATTRIBUTES "OC=MODBUS_PATH /LINE_NAME=(/LINE=MODBUS)/SLAVE_ADDRESS=22/TRACE=0" REGISTER DIRECTORY NAME "/PATH=MOD484_PATH" ATTRIBUTES "OC=MODBUS_PATH /LINE_NAME=(/LINE=MODBUS)/SLAVE_ADDRESS=23/TRACE=0" REGISTER DIRECTORY NAME "/PATH=MODTCP984_PATH" ATTRIBUTES "OC=MODTCP_PATH /IP_ADDRESS=19.20.20.5" EXIT

To execute the ODS command file, enter the following command at the user prompt:

@ODS:[SCRIPTS]ODS_MOD_CONFIG.TEMPLATE

Example 2-5 BSTR Configuration File

! ! Create the protocol profile definitions for the Modicon Micro84, ! Modicon 184, Modicon 384, Modicon 484, Modicon 584, Modicon 884, ! and Modicon 984 family of programmable controllers. ! Protocol profile IDs uniquely identify protocol support to OMNI. ! CREATE PROTOCOL_PROFILE mod_m84 \ -APPLPROFID 101 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE mod_184 \ -APPLPROFID 102 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE mod_384 \ -APPLPROFID 103 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE mod_484 \ -APPLPROFID 104 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE mod_584 \ -APPLPROFID 105 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE mod_884 \ -APPLPROFID 106 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE mod_984 \ -APPLPROFID 107 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE modplus_984 \ -APPLPROFID 108 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG CREATE PROTOCOL_PROFILE modtcp_984 \ -APPLPROFID 109 -MAXPDUSIZE 1024 -SMA_MODE ENABLED -LOG ! ! Create VMD definitions. ! Use the ODS entries and protocol profile names created earlier. ! CREATE VMD mod_984 -MODEL "Modicon_984" \ -VENDOR "Modicon" \ -DVM_ACCESS_POINT "/PATH=MOD984_PATH":mod_984 \ -DESCRIPTION "Modicon 984 programmable controller" \ -LOG CREATE VMD modplus_984 -MODEL "Modicon_984" \ -VENDOR "Modicon" \ -DVM_ACCESS_POINT "/PATH=MODPLUS984_SLAVE_PATH":modplus_984 \ -DESCRIPTION "Modicon 984 programmable controller" \ -LOG CREATE VMD modtcp_984 -MODEL "Modicon_984" \ -VENDOR "Modicon" \ -DVM_ACCESS_POINT "/PATH=MODTCP984_PATH":modtcp_984 \ -DESCRIPTION "Quantum Automation Series" \ -LOG CREATE VMD mod_884 -MODEL "Modicon_884" \ -VENDOR "Modicon" \ -DVM_ACCESS_POINT "/PATH=MOD884_PATH":mod_884 \ -DESCRIPTION "Modicon 884 programmable controller" \ -LOG CREATE VMD mod_584 -MODEL "Modicon_584" \ -VENDOR "Modicon" \ -DVM_ACCESS_POINT "/PATH=MOD584_PATH":mod_584 \ -DESCRIPTION "Modicon 584 programmable controller" \ -LOG CREATE VMD mod_484 -MODEL "Modicon_484" \ -VENDOR "Modicon" \ -DVM_ACCESS_POINT "/PATH=MOD484_PATH":mod_484 \ -DESCRIPTION "Modicon 484 programmable controller" \ -LOG ! ! Create actors/activities for the VMDs ! CREATE NODE mod_node -PHYSICAL "your_node" -LOG CREATE DOMAIN /mod_984 CREATE DOMAIN /modplus_984 CREATE DOMAIN /modtcp_984 CREATE DOMAIN /mod_884 CREATE DOMAIN /mod_584 CREATE DOMAIN /mod_484 CREATE ACTOR /mod -LOG SET CONTEXT /mod CREATE PROGRAM mod_server -PROGRAM_KIND DATADEV -LOG CREATE PROGRAM modplus_server -PROGRAM_KIND DATADEV -LOG CREATE PROGRAM modtcp_server -PROGRAM_KIND DATADEV -LOG CREATE ACTIVITY modbus_984 -PROGRAM mod_server \ -NODES (mod_node) \ -DOMAINS (/mod_984) \ -VMDS (mod_984) \ -LOG CREATE ACTIVITY modplus_984 -PROGRAM modplus_server \ -NODES (mod_node) \ -DOMAINS (/modplus_984) \ -VMDS (modplus_984) \ -LOG CREATE ACTIVITY modtcp_984 -PROGRAM modtcp_server \ -NODES (mod_node) \ -DOMAINS (/modtcp_984) \ -VMDS (modtcp_984) \ -LOG CREATE ACTIVITY modbus_884 -PROGRAM mod_server \ -NODES (mod_node) \ -DOMAINS (/mod_884) \ -VMDS (mod_884) \ -LOG CREATE ACTIVITY modbus_584 -PROGRAM mod_server \ -NODES (mod_node) \ -DOMAINS (/mod_584) \ -VMDS (mod_584) \ -LOG CREATE ACTIVITY modbus_484 -PROGRAM mod_server \ -NODES (mod_node) \ -DOMAINS (/mod_484) \ -VMDS (mod_484) \ -LOG

To execute the BASEstar Open command file, enter the following command at the user prompt:

$CLI_BSTR -F BSTR_MOD_CONFIG.TEMPLATE

For more information about maintaining protocol profile and device definitions, refer to the BASEstar Open for OpenVMS Command Language Interface. For more information about maintaining ODS definitions, refer to the Compaq OMNI for OpenVMS Guide to Using Omni Directory Services.