Example 2-2 is a simple server that receives transactions and events.

Example 2-2 Example Server

rtr_open_channel() ! open a channel to the desired facility rtr_receive_message() ! get the completion status of the open call ! success returns rtr_mt_opened rcv_loop: rtr_receive_message() ! Find out what RTR wants to tell us next CASE message_received_type OF rtr_mt_msg1: Do_Some_SQL_And_Maybe_Send_A_Reply; rtr_mt_msgn: Do_Some_More_SQL_And_Maybe_Send_A_Reply; rtr_mt_prepare: Accept_or_Reject_Tx ; rtr_mt_rtr_event: Process_RTR_Event; rtr_mt_user_event: Process_User_Event; rtr_mt_accepted: Commit_DB ; rtr_mt_rejected: Rollback_DB ; END_CASE; GOTO rcv_loop

2.6 Using the C Programming API

As can be seen from the examples in the previous section, an application first opens one or more channels by calling rtr_open_channel .

The application can then process transactions and events on the channels it has opened. When a channel is no longer needed, the application closes it by calling rtr_close_channel .

A transaction becomes associated with a channel in one of the following circumstances:

1. When a client issues the first rtr_send_to_server call on a previously idle channel.
2. When a server receives from a client the first message belonging to a transaction by calling rtr_receive_message .
3. When a client issues a rtr_start_tx call on a previously idle channel.

From this point on the channel remains associated with the transaction until one of the following occurs:

1. The application rejects the transaction using rtr_reject_tx .
   • The transaction is over, no more messages will be received on behalf of this transaction.
   • The channel becomes idle, ready for initiation/reception of another transaction.
2. The application accepts the transaction using rtr_accept_tx .
   • After calling rtr_accept_tx the application may continue receiving messages belonging to the transaction. However, it cannot subsequently either reverse its decision to accept by calling rtr_reject_tx , or (in the case of a client application) make additional calls to rtr_send_to_server .
   • The final message received for a transaction will always be a transaction completion status; either rtr_mt_rejected or rtr_mt_accepted .
   • The channel becomes idle, ready for initiation or reception of another transaction.
3. The application receives, by a call to rtr_receive_message , a completion status indicating that the transaction has been rejected by some other participant.
   • The transaction is over. No more messages will be received, and no more calls may be made on behalf of this transaction.
   • The channel becomes idle, ready for initiation or reception of another transaction.

Note that RTR considers a transaction to have been committed to the database (so that it does not need to replay it in case of failure) when the server indicates willingness to receive a new transaction by calling rtr_receive_message on the channel, after having received the transaction completion status.

Using RTR_ANYCHAN for the prcvchan argument implies that the transactions are committed on all channels, and calling rtr_receive_message on a single channel implies that the transaction on that channel is committed.

Calling rtr_close_channel also indicates to RTR that the last transaction has been committed.

2.7 Concurrency

The routine rtr_receive_message is used by an application to receive all incoming messages, responses and events. This provides a single consistent method of information delivery.

All RTR routines other than rtr_receive_message complete immediately, and any responses are queued for later reception by rtr_receive_message .

The application calling rtr_receive_message may choose whether (and how long) it should wait for an incoming message to arrive (if there is no message available for immediate reception).

In addition, the application may optionally specify a "wakeup routine" to be called by RTR when a message becomes available for reception.

2.8 Using the RTR Set Wakeup Routine

An application program may typically wish to respond to input from more than one source. An example of this is an application program that prompts for user input in a window and at the same time displays information received asynchronously via broadcast events.

To avoid the application polling its various input sources, RTR provides the rtr_set_wakeup routine. This allows the application to specify a routine to be called when there is data to be received from RTR but no call to rtr_receive_message is currently active. The application program can then be coded as follows:

#include <stdlib.h> void app_wakeup_routine (void) { /* NB This is called from an AST, ALRM or IO signal handler, * or another thread depending on the platform. * Although RTR blocks signals, ASTs and the wakeup thread * until it is safe and convenient, * you may prefer to just set a flag or generate an event and * perform the receive_message in your main thread instead. */ /* Get all outstanding rtr messages */ do { sts = rtr_receive_message(..., /* timoutms */ 0 ) ; check ( sts ) ; process_message () ; } while ( sts != RTR_STS_TIMOUT ) ; } static void app_cancel_wakeup (void) { rtr_set_wakeup( NULL ); } main () { sts = rtr_set_wakeup( app_wakeup_routine ); atexit(app_cancel_wakeup); . . }

If RTR data is available when rtr_set_wakeup is called, the application's wakeup routine is called immediately.

Note that the wakeup handler itself is not permitted to call any function that might have to wait; the only RTR call allowed in the wakeup handler is rtr_receive_message called with a zero timeout.

2.9 API Optimizations

Reliable Transaction Router provides client and server optimizations for greater performance and programming ease.

2.9.1 Client Optimization

Reliable Transaction Router introduces greater flexibility and efficiency in how transactions are packaged at the client.

The total sequence of events that a client application has to execute are as follows:

1. Start a transaction.
2. Send one or more transaction messages, optionally receive one or more transaction messages.
3. Either accept or reject the transaction.
4. Wait for the transaction accept or reject message and process accordingly.
5. Return to Step 1.

In Reliable Transaction Router, all these steps can be followed if required, but optimizations allow some of the steps to be handled implicitly.

• The call to rtr_start_tx (Step 1) may be omitted if, for example, no timeout is required for the transaction. A call to rtr_send_to_server on a channel that does not have an active transaction automatically implies a call to rtr_start_tx .
• Step 3 may be handled implicitly if the client wishes to accept the transaction. This is done by setting the RTR_F_SEN_ACCEPT flag on the last (or only) call to rtr_send_to_server .

Reliable Transaction Router introduces greater flexibility and efficiency in how transaction voting (acceptance by servers) is handled; RTR allows implicit voting.

In detail, the sequence of events that a server executes is as follows:

1. Get one or more transaction messages from RTR and process them.
2. Get the vote request message from RTR.
3. Issue the accept (commit).
4. Get the final transaction state.
5. Return to Step 1.

This scheme is not efficient in some cases. For example, a callout (authentication) server may only need to receive the first message of a multiple message transaction, whereupon it can vote immediately.

In Reliable Transaction Router, all these steps can be enforced if required, but optimizations allow some of the steps to be handled implicitly.

An implicit accept allows Step 3 to be omitted; the transaction is accepted by the server when it does the next call to rtr_receive_message .

These optimizations are controlled by flags ( RTR_F_OPE_EXPLICIT_PREPARE and RTR_F_OPE_EXPLICIT_ACCEPT ) on the call used to open a server channel.

2.9.2.1 The RTR_F_OPE_EXPLICIT_PREPARE Flag

A server channel may be opened with the RTR_F_OPE_EXPLICIT_PREPARE flag; this specifies that it will receive prepare messages (messages of type rtr_mt_prepare ). The server is then expected to accept or reject a transaction on receipt of this message (or earlier). The server may accept the transaction before the prepare message is sent: in this case, the prepare message is not delivered to the server.

The default behaviour of RTR (that is, when this flag is not set in the call to rtr_open_channel ) is to not send prepare messages to the server application. In this case, RTR expects the server to accept or reject transactions without RTR triggering it into voting activity by sending prepare messages.

2.9.2.2 The RTR_F_OPE_EXPLICIT_ACCEPT Flag

A server channel may be opened with the RTR_F_OPE_EXPLICIT_ACCEPT flag; this specifies that it will accept transactions only by making an explicit call to rtr_accept_tx .

The default behaviour of RTR (that is, when this flag is not set) is to treat a server's call to rtr_receive_message (after the last transaction message has been received) as an implicit acceptance of the transaction.

If a transaction has been accepted before the last message has been received, the setting of the RTR_F_OPE_EXPLICIT_ACCEPT is irrelevant.

However, if a transaction has not been prematurely accepted, when the server's vote is required by RTR, the setting of the flags have the following effects:

1. When both RTR_F_OPE_EXPLICIT_PREPARE and RTR_F_OPE_EXPLICIT_ACCEPT are set, the rtr_mt_prepare message is returned to the server, and the server must accept or reject the transaction.
2. When RTR_F_OPE_EXPLICIT_PREPARE is set but RTR_F_OPE_EXPLICIT_ACCEPT is not set, the rtr_mt_prepare message is also returned to the server, but if the server does not perform an explicit accept or reject, then a subsequent call to rtr_receive_message implies an accept of the transaction.
3. When RTR_F_OPE_EXPLICIT_PREPARE is not set but RTR_F_OPE_EXPLICIT_ACCEPT is set, no rtr_mt_prepare message is returned to the server, and no implicit accept of the transaction will be performed: It is assumed that some other event will trigger the application into voting.
4. With neither RTR_F_OPE_EXPLICIT_PREPARE nor RTR_F_OPE_EXPLICIT_ACCEPT set, no rtr_mt_prepare message is returned to the server. An implicit transaction accept is performed.

All RTR calls return a completion status immediately except rtr_receive_message . If the immediate status is successful, many calls will also result in a further message or messages being delivered on the channel.

All RTR received messages are of a defined message type. The message type is given in the message status block. (See pmsgsb on rtr_receive_message in Chapter 3).

The message type allows your application to handle the message appropriately; the message type indicates whether this message contains information that is part of a transaction, or a broadcast, or RTR informational, and so on.

The use of rtr_receive_message for both RTR status messages and application data messages requires the application designer to consider how to respond to the different message types. Message types for server and client applications are listed in Table 2-2 and Table 2-3.

All received messages cause the message status block (pmsgsb on rtr_receive_message ) to be filled; most message types also put data into the user buffer (pmsg on rtr_receive_message ). Only the rtr_mt_prepare message type does not fill the user buffer.

Table 2-4 provides information put in the user buffer for each message type. Table 2-2 and Table 2-3 list all the message types that server channels or client channels can receive, together with a description of their meaning and the recommended application behavior. Order is alphabetical.

Table 2-2 RTR Received Message Types for Server Applications

Message Type	Description	Recommended Action
rtr_mt_accepted	The specified transaction has been accepted by all participants.	Commit the transaction in the database and release database locks.
rtr_mt_closed	Channel has been closed. Sent by RTR if an rtr_open_channel fails (that is, no such facility) or as a result of an operator command such as DELETE FACILITY, or the last message from a rtr_request_info or rtr_set_info call.	Examine reason status. Roll back database for any active transaction.
rtr_mt_msg1	This is the first application message of a transaction, sent by a client.	Process the message.
rtr_mt_msg1_uncertain	This is the first application message of a replayed transaction, that is, a previous incarnation of the server failed during the voting phase.	Check in database to see if the transaction has been processed. If not processed, redo the transaction; else forget the transaction.
rtr_mt_msgn	This is the nth application message (that is, not the first) of a transaction, sent by a client.	Process the message.
rtr_mt_opened	Channel has been opened.	Use the channel.
rtr_mt_prepare	The specified transaction is complete (that is, all messages from the client have been received). This message type is only received by a server that specified that it requires a prepare. (Servers specify this by using the RTR_F_OPE_EXPLICIT_PREPARE flag on the rtr_open_channel call.)	Call either rtr_reject_tx to reject the transaction, or have all required database records locked before calling rtr_accept_tx to accept the transaction.
rtr_mt_rejected	The specified transaction has been rejected by a participant.	Roll back the transaction.
rtr_mt_request_info	Message from a previous call to rtr_request_info .	Use information as required.
rtr_mt_rtr_event	An RTR event with an associated message.	evtnum describes which RTR event occurred. See Table 2-5.
rtr_mt_set_info	Message from a previous call to rtr_set_info .	Use information as required.
rtr_mt_user_event	A user event with an associated message.	evtnum has an application-specific meaning.

Table 2-3 RTR Received Message Types for Client Applications

Message Type	Description	Recommended Action
rtr_mt_accepted	The specified transaction has been accepted by all participants.	Inform user of successful completion.
rtr_mt_closed	Channel has been closed. Sent by RTR if an rtr_open_channel fails (for example, no such facility) or as a result of an operator command such as DELETE FACILITY, or the last message from an rtr_request_info or rtr_set_info call.	Examine reason status.
rtr_mt_opened	Channel has been opened.	Use the channel.
rtr_mt_prepared	The specific nested transaction has been prepared by all participants. (First phase of the two-phase commit protocol on servers has been completed).	Call rtr_accept_tx to accept or rtr_reject_tx to reject the transaction.
rtr_mt_rejected	The specified transaction has been rejected by a participant.	Inform user of reason for failure.
rtr_mt_reply	This is an application reply message sent by a server.	Process message.
rtr_mt_request_info	Message from a previous call to rtr_request_info .	Use information as required.
rtr_mt_rettosend	This message (which had been sent with the RTR_F_SEN_RETURN_TO_SENDER flag) could not be delivered and has been returned.	Take appropriate action for the transaction as required by your application.
rtr_mt_rtr_event	An RTR event with an associated message.	evtnum describes which RTR event occurred. See Table 2-5.
rtr_mt_set_info	Message from a previous call to rtr_set_info .	Use information as required.
rtr_mt_user_event	A user event with an associated message.	evtnum has an application-specific meaning.

Table 2-4 Contents of the User Buffer for Different Message Types

Message Type	Buffer Contents
rtr_mt_accepted	rtr_status_data_t , see Example 2-3.
rtr_mt_closed	rtr_status_data_t , see Example 2-3.
rtr_mt_msg1	The first application message of a transaction, sent by a client.
rtr_mt_msg1_uncertain	The first application message of a replayed transaction.
rtr_mt_msgn	The nth application message (that is, not the first) of a transaction, sent by a client.
rtr_mt_opened	rtr_status_data_t , see Example 2-3.
rtr_mt_prepare	None.
rtr_mt_prepared	rtr_status_data_t , see Example 2-3.
rtr_mt_rejected	rtr_status_data_t , see Example 2-3.
rtr_mt_reply	An application reply message sent by a server.
rtr_mt_request_info	Requested information from rtr_request_info .
rtr_mt_rettosend	Returned message.
rtr_mt_rtr_event	RTR event message.
rtr_mt_set_info	Set information from rtr_set_info .
rtr_mt_user_event	The user broadcast message.

Example 2-3 shows the data type that is returned in the user buffer with message types rtr_mt_accepted, rtr_mt_rejected, rtr_mt_opened and rtr_mt_closed. You can find the meaning of rtr_status_t using the call rtr_error_text .

Example 2-3 Type rtr_status_data_t

/* Type returned with rtr_mt_rejected,*/ typedef struct /* rtr_mt_accepted, rtr_mt_opened */ { /* and rtr_mt_closed messages. */ rtr_status_t status; /* RTR status */ rtr_reason_t reason; /* User-supplied reason */ } rtr_status_data_t;