Document revision date: 19 July 1999
[Compaq] [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]
[OpenVMS documentation]

OpenVMS VAX System Dump Analyzer Utility Manual


Previous Contents Index

SHOW LAN

Displays information contained in various local area network (LAN) data structures. The default qualifiers are /CSMACD/FDDI.


Format

SHOW LAN [/qualifier[,...]]


Parameters

None.

Qualifiers

/CLIENT=xx

Specifies that information be displayed for the specified client. Valid client designators are SCA, DECNET, LAT, MOPRC, TCPIP, DIAG, ELN, BIOS, LAST, USER, ARP, MOPDL, LOOP, BRIDGE, DNAME, ENCRY, DTIME, and LTM. /CLIENT, /DEVICE, and /UNIT are synonymous and mutually exclusive; each must be the last qualifier stated on an SDA command line.

/CLUEXIT

Specifies that cluster protocol information be displayed.

/COUNTERS

Specifies that the LAN station block (LSB) and unit control block (UCB) counters be displayed.

/CSMACD

Specifies that Carrier Sense, Multiple Access with Collision Detect (CSMACD) information for the LAN be displayed.

/CSMACD/FDDI (default)

Displays both Ethernet and FDDI information.

/DEVICE=xx[dn]

Specifies that information be displayed for the specified device. Device designators are specified in the format xxdn, where xx is the type of device, d is the device letter, and n is the unit number. The device letter and unit number are optional. /CLIENT, /DEVICE, and /UNIT are synonymous and mutually exclusive; each must be the last qualifier stated on an SDA command line.

/ERRORS

Specifies that the LSB and UCB error counters be displayed.

/FDDI

Specifies that Fiber Distributed Data Interface (FDDI) controller information for the LAN be displayed.

/FULL

Specifies that all information from the LAN, LSB, and UCB data structures be displayed.

/SUMMARY

Specifies that only a summary of LAN information (a list of flags, LSBs, UCBs, and base addresses) be printed. This is the default.

/TIMESTAMPS

Specifies to print time information (start and stop times and error times) from the device and unit data structures. SDA displays the data in chronological order.

/UNIT=xx/[dn]

Specifies that information be displayed for the specified unit. Unit designators are specified in the format xx/[dn], where xx is the type of unit, d is the device letter, and n is the unit number. The device letter and unit number are optional. /CLIENT, /DEVICE, and /UNIT are synonymous and mutually exclusive; each must be the last qualifier stated on an SDA command line.

Description

The SHOW LAN command displays information contained in various local area network (LAN) data structures. By default, or when you specify the /SUMMARY qualifier, SHOW LAN displays a list of flags, LSBs, UCBs, and base addresses. When you specify the /FULL qualifier, SHOW LAN displays all information found in the LAN, LSB, and UCB data structures.

Examples

#1

SDA> SHOW LAN
 
                -- LAN Device Summary 26-JAN-1993 20:57:41 -- 
 
LAN block address  = 9834C680  (6 stations) 
LAN flags:  0002 LAN_init 
 
LSB address  = 98358B40 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXA Unit Summary 26-JAN-1993 20:57:41 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXA0    98358540 
EXA1    98376340  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXA3    98ACD240  Eth   60-03           DECNET  0004 Uniq 
EXA5    983A9580  Eth   80-41           LAST    0015 Strtn,Uniq,Strtd 
 
LSB address  = 98369B40 
Device state = 4013 Inited,Run,Timer 
 
                 -- FXA Unit Summary 26-JAN-1993 20:57:41 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
FXA0    98369840 
FXA1    98391980  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
FXA2    98AC9680  Eth   60-03           DECNET  0017 Strtn,Len,Uniq,Strtd 
FXA3    98AC7100  Eth   60-01           MOPDL   001F Strtn,Uniq,Share,Strtd 
FXA4    98AC9B80  Eth   90-00           LOOP    001D Strtn,Uniq,Share,Strtd 
FXA5    98395380  Eth   60-04           LAT     0015 Strtn,Uniq,Strtd 
 
LSB address  = 9836CE00 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXB Unit Summary 26-JAN-1993 20:57:41 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXB0    98358880 
EXB1    983B8B00  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXB2    98ACD500  Eth   60-03           DECNET  0004 Uniq 
 
 
LSB address  = 9836FE00 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXC Unit Summary 26-JAN-1993 20:57:41 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXC0    9836CA80 
EXC1    983C08C0  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXC2    98ACD7C0  Eth   60-03           DECNET  0004 Uniq 
 
LSB address  = 98376600 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXD Unit Summary 26-JAN-1993 20:57:41 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXD0    9836FA80 
EXD1    983C8680  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXD2    98ACDA80  Eth   60-03           DECNET  0004 Uniq 
 
LSB address  = 98378340 
Device state = 4013 Inited,Run,Timer 
 
                 -- FXB Unit Summary 26-JAN-1993 20:57:41 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
FXB0    98377F80 
FXB1    983D0440  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
FXB2    98AC9900  Eth   60-03           DECNET  0004 Uniq 
 
 
      

The SHOW LAN command in this example displays information about LAN data structures, including CSMACD and FDDI information.

#2

SDA>  SHOW LAN/COUNTERS/DEV=DECNET
     -- EZA1 60-03 (DECNET) Counters Information 19-JUL-1993 14:27:02 --
Last receive                    None    Last transmit        19-JUL 14:26:51
Octets received               580539    Octets sent               2399353240
PDUs received                   8194    PDUs sent                       5618
Mcast octets received              0    Mcast octets sent                  0
Mcast PDUs received                0    Mcast PDUs sent                    0
Unavail user buffer                0    Last start attempt              None
Last start done      19-JUL 06:40:22    Last start failed               None
 
      

The SHOW LAN command in this example displays the counters for device DECNET.

#3

SDA> SHOW LAN/CSMACD
 
                -- LAN Device Summary 26-JAN-1993 20:57:22 -- 
 
LAN block address  = 9834C680  (6 stations) 
LAN flags:  0002 LAN_init 
 
LSB address  = 98358B40 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXA Unit Summary 26-JAN-1993 20:57:22 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXA0    98358540 
EXA1    98376340  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXA3    98ACD240  Eth   60-03           DECNET  0004 Uniq 
EXA5    983A9580  Eth   80-41           LAST    0015 Strtn,Uniq,Strtd 
 
LSB address  = 9836CE00 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXB Unit Summary 26-JAN-1993 20:57:22 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXB0    98358880 
EXB1    983B8B00  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXB2    98ACD500  Eth   60-03           DECNET  0004 Uniq 
 
LSB address  = 9836FE00 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXC Unit Summary 26-JAN-1993 20:57:22 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXC0    9836CA80 
EXC1    983C08C0  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXC2    98ACD7C0  Eth   60-03           DECNET  0004 Uniq 
 
LSB address  = 98376600 
Device state = 001B Inited,Run,Ctl_Rdy,Timer 
 
                 -- EXD Unit Summary 26-JAN-1993 20:57:22 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
EXD0    9836FA80 
EXD1    983C8680  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
EXD2    98ACDA80  Eth   60-03           DECNET  0004 Uniq 
 
 
      

The SHOW LAN command in this example displays CSMACD information for the LAN.

#4

SDA SHOW LAN/FDDI
                -- LAN Device Summary 26-JAN-1993 20:57:07 -- 
 
LAN block address  = 9834C680  (6 stations) 
LAN flags:  0002 LAN_init 
 
LSB address  = 98369B40 
Device state = 4013 Inited,Run,Timer 
 
                 -- FXA Unit Summary 26-JAN-1993 20:57:07 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
FXA0    98369840 
FXA1    98391980  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
FXA2    98AC9680  Eth   60-03           DECNET  0017 Strtn,Len,Uniq,Strtd 
FXA3    98AC7100  Eth   60-01           MOPDL   001F Strtn,Uniq,Share,Strtd 
FXA4    98AC9B80  Eth   90-00           LOOP    001D Strtn,Uniq,Share,Strtd 
FXA5    98395380  Eth   60-04           LAT     0015 Strtn,Uniq,Strtd 
 
LSB address  = 98378340 
Device state = 4013 Inited,Run,Timer 
 
                 -- FXB Unit Summary 26-JAN-1993 20:57:07 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
FXB0    98377F80 
FXB1    983D0440  Eth   60-07           SCA     0017 Strtn,Len,Uniq,Strtd 
FXB2    98AC9900  Eth   60-03           DECNET  0004 Uniq 
 
 
      

The SHOW LAN command in this example displays FDDI information.

#5

SDA> SHOW LAN/FULL
LAN Data Structures 
 
             -- LAN Information Summary 27-JAN-1993 09:54:50 -- 
 
LAN flags:  0002 LAN_init 
 
LAN module version                 1    First SVAPTE                81FAFC14 
LAN address                 80EA8C00    Number of PTEs                     4 
Number of stations                 1    SVA of pages                80A00A00 
First LSB address           80ECE700                                        
 
 
          -- LAN CSMACD Network Management 27-JAN-1993 09:54:50 -- 
 
Creation time                   None    Times created                      0 
Deletion time                   None    Times deleted                      0 
Module EAB                  00000000    Latest EIB                  00000000 
Port EAB                    00000000                                        
Station EAB                 00000000                                        
 
           -- LAN FDDI Network Management 27-JAN-1993 09:54:50 -- 
 
Creation time                   None    Times created                      0 
Deletion time                   None    Times deleted                      0 
Module EAB                  00000000    Latest EIB                  00000000 
Port EAB                    00000000                                        
Station EAB                 00000000                                        
Link EAB                    00000000                                        
PHY port EAB                00000000                                        
 
              -- ESA Device Information 27-JAN-1993 09:54:50 -- 
 
LSB address                 80ECE700    Active unit count                  2 
LAN version        00000001 06000036    Driver version     00000001 06000009 
LAN code address            80EC8BF9    Driver code address         80EC68B0 
Device name                 ES_LANCE    Device type                       24 
Device version     00000000 00000000    DLL type                      CSMACD 
 
Data chaining                     ON    All multicast state              OFF 
Controller mode               NORMAL    Promiscuous mode                 OFF 
CRC generation mode               ON    Hardware mode                   0000 
Physical address   AA-00-04-00-50-FD    Hardware address   08-00-2B-2A-D7-F7 
 
Flags:  0000                            Characteristics: 0000 
Status: 0013 Inited,Run,Timer 
 
DAT stage                   00000000    DAT xmt status     0000001A 001A0001 
DAT number started                 1    DAT xmt complete     26-JAN 13:20:31 
DAT number failed                  0    DAT rcv found                   None 
Creation time                   None    Create count                       0 
Deletion time                   None    Enable count                       0 
Enabled time                    None    Fatal error count                  0 
Disabled time                   None    Excessive collisons                0 
 
Last receive         27-JAN 09:54:50    Last fatal error                None 
Last transmit        27-JAN 09:54:47    Prev fatal error                None 
Last fork sched      27-JAN 09:54:50    Last exc collision   26-JAN 16:36:26 
Last fork time       27-JAN 09:54:50                                        
 
Rcv buffers owned by device        9    System buffer quota                0 
Xmt entries owned by device        0    Device dependent longword   00000000 
Xmt entries owned by host          0    # restarts pending                 0 
 
NMgmt advised buffer count         0    Events logged                      0 
EIB address                 00000000    NMgmt assigned adr 00-00-00-00-00-00 
LPB address                 00000000                                        
 
 
              -- ESA Queue Information 27-JAN-1993 09:54:50 -- 
 
Control hold queue      80ECE820  Status:  Valid, empty 
Control request queue   80ECE828  Status:  Valid, empty 
Control pending queue   80ECE830  Status:  Valid, empty 
Transmit request queue  80ECE818  Status:  Valid, empty 
Transmit pending queue  80ECE838  Status:  Valid, empty 
Receive buffer queue    80ECE840  Status:  Valid, empty 
Receive pending queue   80ECE848  Status:  Valid, 9 elements 
Post process queue      80ECE850  Status:  Valid, empty 
Delay queue             80ECE858  Status:  Valid, empty 
Auto restart queue      80ECE860  Status:  Valid, empty 
Netwrk mgmt hold queue  80ECE868  Status:  Valid, empty 
 
        -- ESA Multicast Address Information 27-JAN-1993 09:54:50 -- 
 
AB-00-00-04-00-00 
09-00-2B-04-00-00 
 
                 -- ESA Unit Summary 27-JAN-1993 09:54:50 -- 
 
UCB     UCB Addr  Fmt   Value           Client     State 
---     --------  ---   -----           ------  ----------- 
ESA0    80EC61C0 
ESA2    80EFD600  Eth   60-03           DECNET  0017 Strtn,Len,Uniq,Strtd 
ESA4    80F505C0  Eth   80-41           LAST    0015 Strtn,Uniq,Strtd 
    
  . 
  . 
  . 
 
 
        -- ESA Internal Counters Information 27-JAN-1993 09:54:50 -- 
 
Internal counters address   80ECF6E8    Internal counters size            30 
Number of ports                    0    Global page transmits              0 
No work transmits                  0    SVAPTE/BOFF transmits              0 
Bad PTE transmits                  0    Buffer_Adr transmits               0 
 
Fatal error count                  0    RDL errors                         0 
Transmit timeouts                  0    Last fatal error                None 
Restart failures                   0    Prev fatal error                None 
Power failures                     0    Last error CSR              00000000 
Hardware errors                    0    Fatal error code                None 
Control timeouts                   0    Prev fatal error                None 
 
Loopback sent                      0    Loopback failures                  0 
System ID sent                   121    System ID failures                 0 
ReqCounters sent                   0    ReqCounters failures               0 
 
 
          -- ESA0 Template Unit Information 27-JAN-1993 09:54:50 -- 
 
LSB address                 80ECE700    VCIB address                00000000 
Packet format               Ethernet    Error count                        0 
Device buffer size              1500    LAN medium                    CSMACD 
Maximum buffer size             1500    Eth protocol type              00-00 
Hardware buffer quota              9    802E protocol ID      00-00-00-00-00 
Receive buffer quota               0    802.2 SAP                         00 
Allow prom client                 ON    802.2 Group SAPs         00,00,00,00 
Promiscuous mode                 OFF    Maximum header size                0 
802.2 service                    OFF    Hardware address   08-00-2B-2A-D7-F7 
Data chaining                    OFF    Physical address   FF-FF-FF-FF-FF-FF 
Padding mode                      ON    Can change address               OFF 
Automatic restart                OFF    Access mode                EXCLUSIVE 
CRC generation mode               ON    Controller mode               NORMAL 
Maintenance state                 ON    Rcv buffs to queue                 1 
P2 parameters               00000000    Starter's PID               00000000 
All multicast mode               OFF    Creator's PID               00000000 
Rcv buffer quota                   0    LSB size                        5986 
 
 
       -- ESA2 60-03 (DECNET) Unit Information 27-JAN-1993 09:54:50 -- 
 
LSB address                 80ECE700    VCIB address                00000000 
Packet format               Ethernet    Error count                        0 
Device buffer size              1500    LAN medium                    CSMACD 
Maximum buffer size             1498    Eth protocol type              60-03 
Hardware buffer quota              9    802E protocol ID      00-00-00-00-00 
Receive buffer quota           15040    802.2 SAP                         00 
Allow prom client                 ON    802.2 Group SAPs         00,00,00,00 
Promiscuous mode                 OFF    Maximum header size               16 
802.2 service                    OFF    Hardware address   08-00-2B-2A-D7-F7 
Data chaining                    OFF    Physical address   AA-00-04-00-50-FD 
Padding mode                      ON    Can change address               OFF 
Automatic restart                OFF    Access mode                EXCLUSIVE 
CRC generation mode               ON    Controller mode               NORMAL 
Maintenance state                 ON    Rcv buffs to queue                10 
P2 parameters               00374395    Starter's PID               0001000C 
All multicast mode               OFF    Creator's PID               0001000C 
Rcv buffer quota               15040    LSB size                        5986 
 
 
     -- ESA2 60-03 (DECNET) Counters & Misc Info 27-JAN-1993 09:54:50 -- 
 
Last receive         27-JAN 09:54:50    Last transmit        27-JAN 09:54:47 
Octets received              5087025    Octets sent                  2310540 
PDUs received                  34018    PDUs sent                      29121 
Mcast octets received        2189558    Mcast octets sent             246850 
Mcast PDUs received             9877    Mcast PDUs sent                 4937 
Unavail user buffer               11    Last start attempt              None 
Last start done      26-JAN 13:20:32    Last start failed               None 
                                        Share UCB total quota              0 
 
Receive IRP queue       80EFD7C4  Status:  Valid, 1 element 
Shared users queue      80EFD7B4  Status:  Valid, empty 
Receive pending queue   80EFD7BC  Status:  Valid, empty 
 
    -- ESA2 60-03 (DECNET) Multicast Address Info 27-JAN-1993 09:54:50 -- 
 
Multicast address table, embedded: 
  AB-00-00-04-00-00 
 
 
 
 
        -- ESA4 80-41 (LAST) Unit Information 27-JAN-1993 09:54:50 -- 
 
LSB address                 80ECE700    VCIB address                80F504F3 
Packet format               Ethernet    Error count                        0 
   .
   .
   .
 
      -- ESA4 80-41 (LAST) Counters & Misc Info 27-JAN-1993 09:54:50 -- 
 
Last receive         27-JAN 09:54:39    Last transmit        27-JAN 09:54:38 
Octets received              1941967    Octets sent                   371740 
   .
   .
   .
     -- ESA4 80-41 (LAST) Multicast Address Info 27-JAN-1993 09:54:50 -- 
 
Multicast address table, embedded: 
  09-00-2B-04-00-00 
 
      

The SHOW LAN/FULL command in this example displays information for all LAN, LSB, and UCB data structures.

#6

SDA> SHOW LAN/TIMESTAMPS
LAN Data Structures
-------------------
             -- LAN History Information 19-JUL-1993 14:27:38 --
19-JUL 14:27:38.93  EZA               Last receive
19-JUL 14:27:38.93  EZA               Last fork scheduled
19-JUL 14:27:38.93  EZA               Last fork time
19-JUL 14:27:36.05  EZA               Last transmit
19-JUL 14:27:36.05  EZA1     DECNET   Last transmit
19-JUL 14:23:54.41  EZA164   DIAG     Last start completed
19-JUL 08:05:16.09  EZA               Last excessive collision
19-JUL 06:40:22.94  EZA1     DECNET   Last start completed
19-JUL 06:40:21.94  EZA               Last DAT transmit
 
      

The SHOW LAN command displays LAN timestamp information.

SHOW LOCK

Displays information about all lock management locks in the system, cached locks, or a specified lock.


Format

SHOW LOCK {lock-id|/ALL|/CACHED|/NAME=resource-name}


Parameters

lock-id

Name of a specific lock. You cannot specify both a lock-id and a resource-name in the same command line.

Qualifiers

/ALL

Lists all locks that exist in the system. This is the default behavior of the SHOW LOCK command.

/CACHED

Shows only cached lock blocks (LKBs).

/NAME=resource-name

Displays information about the resource associated with the lock whose resource name begins with the specified resource-name. For case-sensitive names, enclose the resource-name in quotation marks. You cannot specify both a lock-id and resource-name in the same command line.

Description

The SHOW LOCK command displays the information described in Table SDA-15 for each lock management lock in the system or for the lock indicated by lock-id. (Use the SHOW SPINLOCK command to display information about spin locks.) You can obtain a similar display for the locks owned by a specific process by issuing the appropriate SHOW PROCESS/LOCKS command. See the OpenVMS System Services Reference Manual for additional discussion of the significance of this information.

You can display information about the resource to which a lock is queued by issuing the SHOW RESOURCE command and specifying the lock-id of the resource.

Table SDA-15 Contents of the SHOW LOCK and SHOW PROCESS/LOCKS Displays
Display Element Description
Process Index 1 Index into the PCB array to a pointer to the process control block (PCB) of the process that owns the lock.
Name 1 Name of the process that owns the lock.
Extended PID 1 Clusterwide identification of the process that owns the lock.
Lock ID Identification of the lock.
PID Systemwide identification of the lock.
Flags Information specified in the request for the lock.
Par. ID Identification of the lock's parent lock.
Granted at Lock mode at which the lock was granted.
Sublocks Identification numbers of the locks that the lock owns.
LKB Address of the lock block (LKB). If a blocking AST has been enabled for this lock, the notation "BLKAST" appears next to the LKB address.
Resource Dump of the resource name. The two leftmost columns of the dump show its contents as hexadecimal values, the least significant byte being represented by the rightmost two digits. The rightmost column represents its contents as ASCII text, the least significant byte being represented by the leftmost character.
Status Status of the lock, information used internally by the lock manager.
Length Length of the resource name.
--- Processor access mode of the name space in which the resource block (RSB) associated with the lock resides.
--- Owner of the resource. Certain resources owned by the operating system list "System" as the owner. Resources owned by a group have the number (in octal) of the owning group in this field.
--- Indication of whether the lock is mastered on the local system or is a process copy.


1You produce this display element only by using the SHOW PROCESS/LOCKS command.


Examples

#1

SDA> SHOW LOCK
Lock database
-------------
  
Lock id:  00010001   PID:    00000000   Flags:   NOQUEUE SYNCSTS SYSTEM
Par. id:  00000000   Granted at    EX            CVTSYS
Sublocks:        1
LKB:      80D0B8A0
Resource:      5F535953 24535953    SYS$SYS_  Status:  NOQUOTA
 Length   16   00000000 4C774449    IDwL....
 Exec. mode    00000000 00000000    ........
 System        00000000 00000000    ........
Local copy
  
  
Lock id:  00010004   PID:    00000000   Flags:   CONVERT SYNCSTS CVTSYS
Par. id:  00000000   Granted at    CR
Sublocks:       16
LKB:      80D091A0   BLKAST
Resource:      4D567624 42313146    F11B$vVM  Status:  NOQUOTA
 Length   18   20204E41 4A353153    S15JAN
 Kernel mode   00000000 00002020      ......
 System        00000000 00000000    ........
Local copy
  
  
Lock id:  00280009   PID:    00000000   Flags:   VALBLK  CONVERT SYNCSTS
Par. id:  00000000   Granted at    CR            NOQUOTA CVTSYS
Sublocks:        0
LKB:      80CDA880
Resource:      52414B5F 24535953    SYS$_KAR  Status:  MSTCPY
 Length   17   30415544 24455441    ATE$DUA0
 Kernel mode   00000000 0000003A    :.......
 System        00000000 00000000    ........
Master copy of lock 001C00F5 on system 000100A1
   .
   .
   .
SDA>  SHOW RESOURCE/LOCK=280009
Resource database
-----------------
Address of RSB:  80BD2150  Group grant mode:       CR
Parent RSB:      00000000  Conversion grant mode:  CR
Sub-RSB count:          0  BLKAST count:            0
Value block:   00000000 00000000 00000000 00000019   Seq. #:  0000002D
Resource:      52414B5F 24535953    SYS$_KAR 
 Length   17   30415544 24455441    ATE$DUA0         CSID:  00000000
 Kernel mode   00000000 0000003A    :.......
 System        00000000 00000000    ........
  
Granted queue (Lock ID / Gr mode):
     00DA1269  CR       00280009  CR       0094054D  CR
     00270B9F  CR       00D70BFE  CR       000D0F4F  CR
     000D1017  CR       00601418  CR       01131450  CR
     000F1964  CR       000200DF  CR
  
Conversion queue (Lock ID / Gr/Rq mode):
     *** EMPTY QUEUE ***
 
Waiting queue (Lock ID / Rq mode):
     *** EMPTY QUEUE ***
 
      


Previous Next Contents Index

  [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]  
  privacy and legal statement  
4556PRO_011.HTML