DECwindows Extensions to Motif
Previous Contents Index

You cannot set a value for this resource. (Access is G.) The default is Null.

DXmNprintFormatChoice

An XmString that specifies the print format to use as the default. Use this resource when you want your application to record a user's print format preference.

Note that if you set this resource, the XmString must exactly match one of the the print widget's supported print formats, including the character set. Digital recommends that you do not specify this resource when the print widget is first managed. Instead, after the user has selected a print format, call the Intrinsic routines XtGetValues to obtain the value and XtSetArg to set DXmNprintFormatChoice. The default is Null. Access is CSG.

DXmNprintFormatCount

The number of print formats specified in the DXmNprintFormatList resource, expressed as an integer value. The default is 0. Access is CSG.

DXmNprintFormatList

An XmStringTable that determines the print widget's print format list, which is the list of print formats that are understood by the print widget. If you set this resource, each XmString in the table must exactly match one of the print widget's supported print formats.

The print widget supports the following data formats:

The default is Null. Access is CSG.

DXmNpriority

An integer value that determines the priority of the job (0--255) in the print queue. If no priority is specified (a value of 0), the default priority for that queue is used. The default is 0. Access is CSG.

DXmNsetup

An XmString that allows you to enter the comma-separated names of one or more setup modules to be transmitted to the printer ahead of the file to be printed. The default is Null. Access is CSG.

DXmNsheetCount

An integer value in the range of 0--10000 that specifies how many times each sheet is to be printed. This option is most frequently used with PostScript printers, which require only a single transmission of information to replicate a complex image (instead of multiple transmissions of the same information). The default is 0. Access is CSG.

DXmNsheetSize

An integer value that determines the size of the medium on which the printing is to take place. The possible values for sheet size are as follows:
Value Size in Inches Size in MM
DXmSIZE_DEFAULT Queue Default Queue Default
DXmSIZE_LETTER 8.5 x 11 216 x 279
DXmSIZE_LEDGER 11 x 17 279 x 432
DXmSIZE_LEGAL 8.5 x 14 216 x 356
DXmSIZE_EXECUTIVE 7.5 x 10 191 x 254
DXmSIZE_A5 5.8 x 8.3 148 x 210
DXmSIZE_A4 8.3 x 11.7 210 x 297
DXmSIZE_A3 11.7 x 16.5 297 x 420
DXmSIZE_B5 7.2 x 10.1 176 x 250
DXmSIZE_B4 10.1 x 14.3 250 x 353
DXmSIZE_C4_ENVELOPE 9 x 12.8 229 x 324
DXmSIZE_C5_ENVELOPE 6.4 x 9 162 x 229
DXmSIZE_C56_ENVELOPE 4.3 x 8.7 110 x 220
DXmSIZE_10X13_ENVELOPE 10 x 13 254 x 330.2
DXmSIZE_9X12_ENVELOPE 9 x 12 228.6 x 304.8
DXmSIZE_BUSINESS_ENVELOPE 4.125 x 9.5 104.8 x 241.3

The default is DXmSIZE_DEFAULT, or 0. Access is CSG.

DXmNsides

An integer value that determines on how many sides of a medium the printing is to take place and the manner in which the medium is turned when switching from one side to the other.

The possible values for DXmNsides are as follows:
Value Description
DXmSIDES_DEFAULT The default for the queue on which you are printing.
DXmSIDES_SIMPLEX_ONE Prints on one side only. This is also known as one-sided simplex.
DXmSIDES_SIMPLEX_TWO Prints on two sides of the sheet, but uses the same page layout conventions required for single-sided printing. The layout reflects margin and page number locations and related specifications.
DXmSIDES_DUPLEX_ONE Prints only on the first side of each sheet, but retains the page layout intended for duplex printing. The layout reflects margin and page number locations and related specifications.
DXmSIDES_DUPLEX_TWO Prints on two sides; the second side is accessed by flipping the page along its left edge, like turning the pages of a book. This is also known as two-sided duplex.
DXmSIDES_TUMBLE_ONE Prints only on the first side of each sheet, but retains the page layout intended for tumble printing. The layout reflects margin and page number locations and related specifications.
DXmSIDES_TUMBLE_TWO Prints on two sides, and the second side is reached by flipping the page along its top edge, like turning the pages of a legal document. This is also known as two-sided tumble.

The default is DXmSIDES_DEFAULT, or 0. Access is CSG.

DXmNstartSheetComment

The XmString to appear on your File Start Sheet. The default is Null. Access is CSG.

DXmNsuppressOptionsMask

Suppresses certain print widget features, such as the number of print choices available to the user. The possible values for this resource are as follows:

The default is DXmSUPPRESS_NONE, or 0. Access is CSG.

DXmNunmanageOnCancel

A Boolean value that specifies whether the print widget automatically unmanages itself when the Cancel button in the primary box is pressed. The default is False. Access is CSG.

DXmNunmanageOnOk

A Boolean value that specifies whether the print widget automatically unmanages itself when the OK button in the primary box is pressed. The default is False. Access is CSG.

XmNcancelCallback

Callback made when the user clicks on the Cancel push button in the print widget primary dialog box. If the DXmNunmanageOnCancel resource is set, the print widget automatically unmanages itself when the Cancel button in the primary box is pressed. The callback reason is XmCR_CANCEL. The default is Null. Access is CSG.

Your application can use the XmNcancelCallback callback to perform related functions as well.

XmNokCallback

Callback made when the user clicks on the OK push button in the print widget primary dialog box. If the DXmNunmanageOnOk resource is set, the print widget automatically unmanages itself when the OK button in the primary box is pressed. The callback reason is XmCR_OK. The default is Null. Access is CSG.

Note that your application can use the XmNokCallback callback to perform other functions, such as calling DXmPrintWgtPrintJob to submit the print job. Callback Structure 


typedef struct 
{ 
      int     reason;  
      XEvent  *event;  
} XmAnyCallbackStruct;

Callback Field Descriptions

reason

An integer set to the callback reason. See the Callback Reasons section for the values that are valid for this widget.

event

A pointer to the X event structure describing the event that generated this callback.

Callback Reasons

XmCR_OK

The user activated the OK push button in the print widget primary dialog box.

XmCR_CANCEL

The user activated the Cancel push button in the print widget primary dialog box.

Description

The DXmCreatePrintDialog routine creates the print widget, which is a modeless widget that provides applications with a fast, convenient method of printing one or more files in multiple formats.

See the DECwindows Motif Guide to Application Programming for a complete description of the print widget. See also the following routines for related information:
Routine Description
DXmPrintWgtAugmentList Defines additional print formats
DXmPrintWgtPrintJob Submits a print job

DXmCreateScrolledCSText

Creates a compound string text widget with scroll bars.
Widget Class Hierarchy

Core Resource Set
\
XmPrimitive Resource Set
\
DXmScrolledCSText Resource Set

Format


Widget DXmCreateScrolledCSText(parent, name, args, num_args) 
        Widget    parent; 
        char      *name; 
        Args      *args; 
        Cardinal  num_args;

Return Value

The identifier (widget ID) of the created compound string text widget.

Arguments

parent

The identifier (widget ID) of the parent widget.

name

The name of the created widget.

args

The application override argument list.

num_args

The number of arguments in the application override argument list.

Description

The DXmCreateScrolledCSText routine uses the same arguments and resources as the DXmCreateCSText routine to create a compound string text widget but uses the following resources to create horizontal and vertical scroll bars for the widget as well:
Resource Description
XmNscrollHorizontal Controls whether a scroll bar that allows the user to scroll through text horizontally is added to the compound string text window.
XmNscrollTopSide Controls whether the horizontal scroll bar is positioned at the top of the compound string text window.
XmNscrollVertical Controls whether a scroll bar that allows the user to scroll through text vertically is added to the compound string text window.
XmNscrollLeftSide Controls whether the vertical scroll bar is placed on the left side of the compound string text window.

See the DXmCreateCSText routine for a complete description of all resources.

DXmCreateSvn

Creates an SVN widget
Widget Class Hierarchy

Core Resource Set
\
Composite Resource Set
\
Constraint Resource Set
\
XmManager Resource Set
\
DXmSvn Resource Set

Format


Widget DXmCreateSvn(parent, name, arglist, argcount) 
        Widget  parent; 
        char    *name; 
        Arg     *arglist; 
        int     argcount;
Resources You can set the following widget-specific resources in the arglist: 


XtCallbackList  DXmSvnNattachToSourceCallback 
Boolean         DXmSvnNcolumnLines; 
Dimension       DXmSvnNdefaultSpacing; 
XtCallbackList  DXmSvnNdetachFromSourceCallback 
XtCallbackList  DXmSvnNdisplayChangedCallback 
short           DXmSvnNdisplayMode; 
XtCallbackList  DXmSvnNdraggingCallback 
XtCallbackList  DXmSvnNdraggingEndCallback 
XtCallbackList  DXmSvnNentrySelectedCallback 
XtCallbackList  DXmSvnNentryTransferCallback 
XtCallbackList  DXmSvnNentryUnselectedCallback 
Boolean         DXmSvnNexpectHighlighting; 
XtCallbackList  DXmSvnNextendConfirmCallback 
Boolean         DXmSvnNfixedWidthEntries; 
XmFontList      DXmSvnNfontList; 
XmFontList      DXmSvnNfontListLevel0; 
XmFontList      DXmSvnNfontListLevel1; 
XmFontList      DXmSvnNfontListLevel2; 
XmFontList      DXmSvnNfontListLevel3; 
XmFontList      DXmSvnNfontListLevel4; 
Boolean         DXmSvnNforceSeqGetEntry; 
XtCallbackList  DXmSvnNgetEntryCallback 
Dimension       DXmSvnNghostHeight; 
Pixmap          DXmSvnNghostPixmap; 
Dimension       DXmSvnNghostWidth; 
Position        DXmSvnNghostX; 
Position        DXmSvnNghostY; 
XtCallbackList  DXmSvnNhelpRequestedCallback; 
Dimension       DXmSvnNindentMargin; 
Boolean         DXmSvnNliveScrolling; 
Boolean         DXmSvnNmultipleSelections; 
XmString        DXmSvnNnavWindowTitle; 
longword        DXmSvnNnumberOfEntries; 
Widget          DXmSvnNoutlineHScrollWidget; 
Widget          DXmSvnNpaneWidget; 
XtCallbackList  DXmSvnNpopupMenuCallback 
longword        DXmSvnNprimaryPercentage 
Widget          DXmSvnNprimaryWindowWidget 
Position        DXmSvnNsecondaryBaseX; 
Boolean         DXmSvnNsecondaryComponentsUnmapped; 
Widget          DXmSvnNsecondaryWindowWidget; 
XtCallbackList  DXmSvnNselectAndConfirmCallback 
short           DXmSvnNselectionMode; 
XtCallbackList  DXmSvnNselectionsDraggedCallback 
Boolean         DXmSvnNshowPathToRoot; 
short           DXmSvnNstartColumnComponent; 
short           DXmSvnNstartLocationCursor;                     
XtCallbackList  DXmSvnNtransitionsDoneCallback 
Dimension       DXmSvnNtreeArcWidth; 
Boolean         DXmSvnNtreeCenteredComponents; 
Boolean         DXmSvnNtreeEntryOutlines; 
Boolean         DXmSvnNtreeEntryShadows; 
Boolean         DXmSvnNtreeIndexAll; 
Dimension       DXmSvnNtreeLevelSpacing; 
Boolean         DXmSvnNtreePerpendicularLines; 
Dimension       DXmSvnNtreeSiblingSpacing; 
short           DXmSvnNtreeStyle; 
Boolean         DXmSvnNtruncateText; 
Boolean         DXmSvnNuseScrollButtons;

Return Value

The identifier (widget ID) of the created SVN widget.

Arguments

parent

The identifier (widget ID) of the parent widget.

name

A character string that defines the name of the widget.

arglist

The application argument list.

argcount

An integer that represents the number of arguments in the application argument list. If there are no arguments in the argument list, argcount must equal 0. However, when argcount equals 0, the argument list does not have to be Null.

Resources

DXmSvnNattachToSourceCallback

One or more callbacks made when a widget attaches to the source data module, which then call the DXmSvnAddEntries routine to specify the initial entries (and number of entries) in the data hierarchy. The callback reason is DXmSvnCRAttachToSource. The default is Null. Access is CG.

DXmSvnNcolumnLines

A Boolean resource that, when True, specifies that columns are to be separated with a line. The default is False. Access is CSG.

DXmSvnNdefaultSpacing

The number of pixels between components. The default is 12 pixels. Access is CSG.

DXmSvnNdetachFromSourceCallback

Callback made when the widget is detached from the source data module (the widget is being destroyed). The application records that this widget will never call back. The callback reason is DXmSvnCRDetachFromSource. The default is Null. Access is CSG.

DXmSvnNdisplayChangedCallback

Callback made when the entries currently being displayed to the user have changed. This change may be in response to an expand or collapse operation, scrolling, or the application issuing calls to the DXmSvnPositionDisplay routine.

The callback reason is DXmSvnCRDisplayChanged. An additional callback field is loc_cursor_entry_number, which is the number of the entry where the location cursor is currently displayed. The default is Null. Access is CSG.

DXmSvnNdisplayMode

Specifies which display should appear on the screen, indicated by one of the following values:
Value Description
DXmSvnKdisplayOutline Display in outline mode.
DXmSvnKdisplayColumns Display in column mode.
DXmSvnKdisplayTree Display in tree mode.
DXmSvnKdisplayAllModes Used only by the DXmSvnSetComponentHidden routine to hide a component in all modes.
DXmSvnKdisplayNone Used only by the DXmSvnSetComponentHidden routine to display (not hide) a component in any mode.

The default is DXmSvnKdisplayOutline. Access is CSG.

DXmSvnNdraggingCallback

Callback made when a user presses MB2 to drag a set of entries. This callback is required for application-controlled dragging (which you set by using the DXmSvnSetApplDragging routine).

The callback reason is DXmSvnCRDragging. Other callback fields are as follows:
Field Description
time The time that the button press event occurred
x The x position of the pointer
y The y position of the pointer
dragged_entry_number The number of the entry currently being dragged while MB2 is pressed
loc_cursor_entry_number The number of the entry where the location cursor is currently displayed
event A pointer to the XEvent that generated this callback

The default is Null. Access is CSG.

DXmSvnNdraggingEndCallback

Callback made when the user releases MB2 after dragging a set of entries. This callback is required for application-controlled dragging (which you set by using the DXmSvnSetApplDragging routine).

The callback reason is DXmSvnCRDraggingEnd. Other callback fields are as follows:
Field Description
time The time that the button release event occurred
x The x position of the cursor when the mouse button was released
y The y position of the cursor when the mouse button was released
loc_cursor_entry_number The number of the entry where the location cursor is currently displayed
event A pointer to the XEvent that generated this callback

The default is Null. Access is CSG.

DXmSvnNentrySelectedCallback

Callback made when the user selects an entry. The fields provided in the callback structure enable the application to obtain more information about the selected entry from the source module.

The callback reason is DXmSvnCREntrySelected. Other callback fields are as follows:
Field Description
entry_number The entry selected.
component_number The component within the entry the mouse was positioned over when the entry was selected.
time Time when the entry was selected.
entry_tag The value (previously set in the application with the DXmSvnSetEntry or DXmSvnSetEntryTag routine) associated with the entry_number field.
first_selection One of the following values:
Value Description
DXmSvnKnotFirst This is not the first selection that has been made.
DXmSvnKfirstOfOne There is only one selection being made.
DXmSvnKfirstOfMany This is the first of many selections being made.

This value (when treated as a Boolean function) is usually True. It is False only when the user has made a range selection and this is not the first DXmSvnNentrySelectedCallback.

entry_level The entry's level number.
loc_cursor_entry_number The number of the entry where the location cursor is currently displayed.
event A pointer to the XEvent that generated this callback.

The default is Null. Access is CSG.

DXmSvnNentryTransferCallback

Callback made when the user clicks on MB2 without moving the mouse.

The callback reason is DXmSvnCREntryTransfer. Other callback fields are as follows:
Field Description
loc_cursor_entry_number The number of the entry where the location cursor is currently displayed.
transfer_mode The value in this field reflects whether or not the user pressed a modifier key with an MB2 click and how the application should respond (either taking no action at all, or moving or copying the entry). The possible values for this field are as follows:
Value Description
DXmSvnKtransfer Unknown No modifier was specified with the MB2 click.
DXmSvnKtransferMove The ALT modifier was specified with the MB2 click.
DXmSvnKtransferCopy The Ctrl modifier was specified with the MB2 click.
event A pointer to the X event structure describing the event that generated this callback.

The default is Null. Access is CSG.

DXmSvnNentryUnselectedCallback

Callback made when the user cancels ("unselects") the selection of an entry.

The fields provided in the callback structure enable an application to obtain more information about the entry from its source module.

The callback reason is DXmSvnCREntryUnselected. Other callback fields are as follows:
Field Description
entry_number The canceled entry
component_number The component within the entry the mouse was positioned over when the entry was canceled
time The time when the selection was canceled
loc_cursor_entry_number The number of the entry where the location cursor is currently displayed
event A pointer to the X event structure describing the event that generated this callback

Previous Next Contents Index