Skip to Main Content United States    
PRODUCTS SUPPORT SOLUTIONS SERVICES
COMPAQ SOFTWARE

Compaq C

Compaq C

User's Guide for OpenVMS Systems

Order Number: AA--PUNZL--TK


February 2002

This guide describes using the Compaq C compiler on OpenVMS systems. It contains information on Compaq C program development in the OpenVMS environment, Compaq C features specific to OpenVMS systems, and cross-system portability concerns.

Revision/Update Information: This revised guide supersedes the
DEC C User's Guide for OpenVMS Systems (Order No. AA--PUNZK--TK)

Software Version: Compaq C Version 6.5 for OpenVMS Alpha Systems

Compaq Computer Corporation
Houston, Texas


First Printing, November 1992
Revised, February 2002

© Copyright 2002 Compaq Information Technologies Group, L.P.

COMPAQ, the Compaq logo, VAX, Alpha, VMS, OpenVMS, and Tru64 are trademarks of Compaq Information Technologies Group, L.P. in the U.S. and/or other countries. Microsoft and Visual C++ are trademarks of Microsoft Corporation. UNIX is a trademark of The Open Group in the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies.

Confidential computer software. Valid license from Compaq required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided as is without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.

This document is available on CD-ROM.

This document was prepared using DECdocument, Version V3.3-1e.

Contents Index


Preface

This guide contains the information necessary for developing and debugging Compaq C (formerly DEC C) programs on the OpenVMS operating system. Compaq C is compliant with the International Standards Organization (ISO) C Standard (ISO 9899:1990[1992]), formerly the American National Standard for Information (ANSI) Systems-Programming Language C (document number: X3.159-1989), called the ANSI C Standard in this guide. Compaq C is an ANSI compliant C compiler for the OpenVMS operating system on VAX and Alpha processors and for the Tru64 UNIX® operating system on Alpha processors. Through use of command-line options, Compaq C is compatible with older dialects of C, including common usage C and VAX C.

This guide also includes Compaq C language features specific to OpenVMS systems, as well as information about porting C programs to and from OpenVMS and other operating systems. For more information about porting programs to and from other operating systems, see the Compaq C Run-Time Library Reference Manual for OpenVMS Systems.

You may send comments or suggestions regarding this guide or any Compaq C document by sending electronic mail to the following Internet address:

c_docs@compaq.com

Intended Audience

This guide is intended for experienced programmers who need to develop Compaq C programs on OpenVMS systems, for users who need to know the difference between Compaq C and other implementations, and for experienced C users who need to reference language information specific to OpenVMS systems. You should be familiar with one high-level language and should have some familiarity with the DIGITAL Command Language (DCL). If you are not familiar with or need to reference information about the DCL, see Chapter 1.

Document Structure

This guide has the following chapters and appendixes:

  • Chapter 1 shows how to create, compile, link, and run a Compaq C program.
  • Chapter 2 describes VAX Record Management Services (RMS).
  • Chapter 3 describes interlanguage calling, and OpenVMS System Services, Run-Time Library (RTL) routines, and calling standard conventions.
  • Chapter 4 describes data storage and representation on OpenVMS systems.
  • Chapter 5 describes the preprocessor directives.
  • Chapter 6 describes the predefined macros and the built-in functions.
  • Appendix A documents the features that distinguish Compaq C for OpenVMS Systems from VAX C Version 3.2.
  • Appendix B describes common pitfalls when using Compaq C.
  • Appendix C provides an overview of the OpenVMS Debugger, the DIGITAL Text Processing Utility (TPU), the DIGITAL Language-Sensitive Editor (LSE), the DIGITAL Source Code Analyzer (SCA), and CDD/Repository.
  • Appendix D lists Compaq C compiler messages.
  • Appendix E describes implementation-specific limits and parameters for Compaq C on OpenVMS systems.
  • The glossary provides an alphabetical listing of key terms.

Associated Documents

You may find the following documents useful when programming in Compaq C:

  • DEC C Migration Guide for OpenVMS VAX Systems---To help OpenVMS VAX application programmers migrate from VAX C to Compaq C. (VAX ONLY)
  • Compaq C Installation Guide for OpenVMS VAX Systems---For OpenVMS system programmers who install the Compaq C software on VAX systems. (VAX ONLY)
  • Compaq C Installation Guide for OpenVMS Alpha Systems---For OpenVMS system programmers who install the Compaq C software on Alpha systems. (ALPHA ONLY)
  • Compaq C Language Reference Manual---Provides language reference information for Compaq C on DIGITAL systems.
  • Compaq C Run-Time Library Reference Manual for OpenVMS Systems---Provides information on using the Compaq C Run-Time Library (RTL) functions and macros, and information about porting programs to and from other operating systems.
  • The C Programming Language1---Provides an excellent tutorial of the C language. Because Compaq C contains features and enhancements to the ANSI C language, use the Compaq C User's Guide for OpenVMS Systems and the Compaq C Language Reference Manual as the reference books for the full description of Compaq C.
  • OpenVMS Calling Standard---Describes the concepts used by all OpenVMS languages to invoke routines and pass data between them. It also describes the differences between the VAX and Alpha parameter-passing mechanisms.

Note

1 Brian W. Kernighan and Dennis M. Ritchie, The C Programming Language, Second Edition (Englewood Cliffs, New Jersey: Prentice Hall, 1988).

Conventions Used in this Document

Table 1 lists the conventions used in this guide.

Table 1 Conventions Used in this Guide
Convention Meaning
[Return] The symbol [Return] represents a single stroke of the Return key on a terminal.
Ctrl/X The symbol Ctrl/X, where the letter X represents a terminal control character, is generated by holding down the Ctrl key while pressing the key of the specified terminal character.
switch statement
fprintf function
auto storage class
In syntax definitions, items appearing in monospaced type identify language keywords and the names of OpenVMS and Compaq C Run-Time Library functions.
arg1 Italic type indicates a placeholder, such as an argument or parameter name, and the introduction of new terms.
$ RUN CPROG [Return] Interactive examples show user input in boldface type.
float x;
.
.
.
x = 5;
A vertical ellipsis indicates that not all of the text of a program or program output is illustrated. Only relevant material is shown in the example.
option,... A horizontal ellipsis indicates that additional parameters, options, or values can be entered. A comma that precedes the ellipsis indicates that successive items must be separated by commas.
[output-source,...] Square brackets, in function synopses and a few other contexts, indicate that a syntactic element is optional. Square brackets are not optional, however, when used to delimit a directory name in an OpenVMS file specification or when used to delimit the dimensions of an array in Compaq C source code.
sc-specifier ::=
auto
static
[extern]
register
In syntax definitions, items appearing on separate lines are mutually exclusive alternatives.
{a|b} Braces surrounding two or more items separated by a vertical bar (|) indicate a choice; you must choose one of the two syntactic elements.
<ucDelta symbol> A delta symbol is used in some contexts to indicate a single ASCII space character.

Platform Labels

A platform is a combination of operating system and hardware that provides a distinct environment. This guide contains information applicable to the OpenVMS operating system on both the VAX and Alpha architectures.

The information in this guide applies to both of these platforms, except when specifically labeled, as follows:
Label Explanation
(ALPHA ONLY) Specific to an Alpha processor running the OpenVMS operating system.
(VAX ONLY) Specific to a VAX processor running the OpenVMS operating system.

New and Changed Features

Compaq C Version 6.5 for OpenVMS Alpha contains the following new features and enhancements:

  • This version uses the GEM BL48 back end, with best support for EV7 processors.
  • The optional " _nm " suffix can be appended to any #pragma name to prevent macro expansion on that pragma. This is the opposite of the " _m " suffix introduced in Compaq C Version 6.4 ( Section 5.4).
  • Support is added for the C99 _Pragma operator, which effectively allows #pragma directives to be produced by macro expansion. (See the Compaq C Language Reference Manual.)
  • C99 constants for specific values of Infinity and NaN are supported (only when using /FLOAT=IEEE and /IEEE={anything but FAST}, and compiled in any language mode except COMMON or VAXC). (See the Compaq C Language Reference Manual.)
  • C99 adjacent-string concatenation is supported. Wide and normal strings can be mixed, in which case the normal strings get promoted to wide, and a wide result is produced. (See the Compaq C Language Reference Manual.)
  • C99 Universal Character Names (UCNs) are accepted in identifiers, string literals, and character constants (and their wide variations). (See the Compaq C Language Reference Manual.)
  • New keywords NOCRTL and RESTORE_CRTL are added to the #pragma extern_prefix preprocessor directive. These keywords control whether or not the compiler applies its default RTL prefixing to the names specified on the pragma directive ( Section 5.4.6).
  • The /ANNOTATIONS command-line qualifier is added ( Section 1.3.4).
  • More aggressive /OPTIMIZE=INLINE=ALL ( Section 1.3.4).


Chapter 1
Developing Compaq C Programs

This chapter describes the following information about developing Compaq C programs on an OpenVMS system:

1.1 DCL Commands for Program Development

This section provides a brief overview of the DCL commands used for program development. The following sections provide more detailed information about these topics.

Figure 1-1 shows the basic steps in Compaq C program development.

Figure 1-1 DCL Commands for Developing Programs


To create a Compaq C source program at DCL level, you must invoke a text editor. In Figure 1-1, the EDIT command invokes the default editor EDT to create the source program AVERAGE.C. You can use another editor, such as the OpenVMS Text Processing Utility (TPU) or the Compaq Language-Sensitive Editor (LSE). (LSE is a product that must be purchased separately; see Appendix C for more information.) A file type of C is used to indicate that you are creating a Compaq C source program. C is the conventional file type for all Compaq C source programs.

When you compile your program with the CC command, you do not have to specify the file type; by default, Compaq C searches for files with a file type of C.

If your source program compiles successfully, the Compaq C compiler creates an object file with the file type OBJ.

However, if the Compaq C compiler detects errors in your source program, the system displays each error on your screen and then displays the DCL prompt. You can then reinvoke your text editor to correct each error.

You can specify command qualifiers on the CC command. Command qualifiers cause the Compaq C compiler to perform additional actions. In the following example, the /LIST qualifier causes the Compaq C compiler to produce the listing file AVERAGE.LIS:


$ CC/LIST  AVERAGE

For a complete description of all CC command qualifiers, see Section 1.3.4.

After your program has compiled successfully, invoke the OpenVMS Linker to create an executable image file. For example:


$ LINK AVERAGE

The linker uses the object file produced by Compaq C as input to produce an executable image file as output. (The executable image is a file containing program code that can be run on the system.)

You can specify command qualifiers with the DCL command LINK. For a complete list and explanation of all the command qualifiers available with the LINK command, see Section 1.4.2.

After producing the executable image file, use the RUN command to execute your program.

1.2 Creating a Compaq C Program

To create and modify a Compaq C program, you must invoke a text editor. The OpenVMS system provides you with two text editors: EDT and the OpenVMS Text Processing Utility (TPU). The following section discusses TPU. See the OpenVMS EDT Reference Manual for more information on EDT.

1.2.1 Using TPU

TPU is a high-performance, programmable utility. It provides two editing interfaces: the Extensible VAX Editor (EVE), described in the following section, and the TPU EDT Keypad Emulator. You can also create your own interfaces.

Like EDT, TPU provides you with an online help facility that you can access during your editing session. When you invoke TPU to create a file, a journal file is automatically created. You can use this journal file to recover your edits if the system fails during an editing session. To recover your edits, enter the EVE/RECOVER command.

Unlike EDT, TPU provides multiple windows. This feature allows you to view two files on your screen at the same time.

1.2.2 The EVE Interface to TPU

EVE is an interactive text editor that allows you to execute common editing functions using the EVE keypad or to execute more advanced functions by entering commands on the EVE command line. The following command line invokes the EVE editor and creates the file PROG_1.C:


$ EDIT/TPU PROG_1.C

You can define a global symbol for the EDIT/TPU command by placing a symbol definition in your LOGIN.COM file. For example:


$ EVE == "EDIT/TPU"

After this command line is executed, you can type EVE at the DCL prompt followed by the name of the file you want to modify or create.

For more information on using EVE, see the Guide to VMS Text Processing.

1.3 Compiling a Compaq C Program

The Compaq C compiler performs the following functions:

  • Detects errors in your source program
  • Displays each error on your screen or writes the errors to a file
  • Generates machine-language instructions from the source
    statements
  • Groups these machine-language instructions into an object module for the linker

The following sections discuss the CC command and its qualifiers.

1.3.1 The CC Command

To invoke the Compaq C compiler, enter the CC command at the DCL prompt ($). The CC command has the following format:

CC[/qualifier...][ file-spec [/qualifier...]],...

Note (VAX ONLY)

This note applies to OpenVMS VAX systems that have both Compaq C and VAX C installed.

The CC command is used to invoke either the VAX C or Compaq C compiler. If the Compaq C installation procedure detects that your system already has a VAX C compiler installed on it, the installer is given the option to specify which compiler gets invoked by default whenever the CC command verb is used. To invoke the compiler that is not the default, use the CC command with the appropriate qualifier: CC/DECC for the Compaq C compiler, or CC/VAXC for the VAX C compiler. Where the CC command appears in examples in this manual, CC/DECC is assumed to be the default.

/qualifier

An action to be performed by the compiler on all files or specific files listed. When a qualifier appears directly after the CC command, it affects all the files listed. When a qualifier appears after a file specification, it affects only the file that immediately precedes it. However, when files are concatenated, these rules do not apply.

file-spec

An input source file that contains the program or module to be compiled. You are not required to specify a file type if you give your file a .C file extension; the Compaq C compiler adopts the default file type C.

You can include more than one file specification on the same command line by separating the file specifications with either a comma (,) or a plus sign (+). If you separate the file specifications with commas, you can control which source files are affected by each qualifier. In the following example, the Compaq C compiler creates an object file for each source file but creates only a listing file for the source files PROG_1 and PROG_3:


$ CC /LIST PROG_1, PROG_2/NOLIST, PROG_3

If you separate file specifications with plus signs, the Compaq C compiler concatenates each of the specified source files and creates one object file and one listing file. In the following example, only one object file is created, PROG_1.OBJ, and only one listing file is created, PROG_1.LIS. Both of these files are named after the first source file in the list, but contain all three modules.


$ CC PROG_1 + PROG_2/LIST + PROG_3

Any qualifiers specified for a single file within a list of files separated with plus signs affect all the files in the list. See the description of the /PLUS_LIST_OPTIMIZE qualifier for its affect on file concatenation.

Note

Concatenating source files without using the /PLUS_LIST_OPTIMIZE qualifier (ALPHA ONLY) is not recommended because potential conflicts in the name space of declared objects can result in compilation errors or incorrect run-time behavior.

A more common use of plus-list concatenation is for specifying text libraries. You can specify the name of a text library on the CC command line to compile a source program. A text library is a file that contains text organized into modules indexed by a table. Text libraries have a .TLB default file extension. In the following example, text libraries A.TLB and B.TLB are made available for searching for text library modules during the compilation of source file TEST.C:


$ CC TEST.C + A.TLB/LIB + B.TLB/LIB 


Next Contents Index
Buy Online or Call 1.800.888.0220      privacy statement and legal notices 
STORES CONTACT US SEARCH PRODUCTS SOLUTIONS OPTIONS DEVELOPERS