DECwindows Motif Version 1.2--5 for OpenVMS Installation Guide


Previous Contents Index


Appendix B
VMSINSTAL Sample Installation

This appendix contains a sample VMSINSTAL product installation.

B.1 Sample Installation Using VMSINSTAL on a VMS Version 5.5--2 System

Example B-1 contains a sample installation of the DECwindows Motif Version 1.2-5 for OpenVMS software on a VMS Version 5.5-2 operating system using the VMSINSTAL procedure. The sample installation assumes that no users are logged in to the system and that you specified OPTIONS N to display the release notes.

Example B-1 Sample Installation Using VMSINSTAL

$ @SYS$UPDATE:VMSINSTAL DWMOTIFVAXU5012 
 
        VAX/VMS Software Product Installation Procedure V5.5-2 
 
 
It is 26-MAR-1998 at 10:36. 
 
Enter a question mark (?) at any time for help. 
 
* Are you satisfied with the backup of your system disk [YES]? [Return]
* Where will the distribution volumes be mounted: DAD2:[000000][Return]
Enter the products to be processed from the first distribution volume set. 
* Products: dwmotifvaxu5012 [Return]
* Enter installation options you wish to use (none): [Return] 
The following products will be processed: 
 
  DWMOTIFVAXU5 V1.2 
 
 
        Beginning installation of DWMOTIFVAXU5 V1.2 at 10:36 
 
%VMSINSTAL-I-RESTORE, Restoring product save set A ... 
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. 
 
        *** Installing DECwindows Motif for OpenVMS VAX software *** 
 
  Copyright Digital Equipment Corporation 1988, 1998. All rights reserved. 
 
  Restricted Rights: Use, duplication, or disclosure by the U.S. Government 
  is subject to restrictions as set forth in subparagraph (c)(1)(ii) of 
  DFARS  252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, 
  as  applicable. 
 
  This software is proprietary to and embodies the confidential technology 
  of Digital Equipment Corporation. Possession, use, or copying of this 
  software and media is authorized only pursuant to a valid written license 
  from DIGITAL or an authorized sublicensor. 
 
 
  You can install the DECwindows Motif kit completely or in selected 
  portions.  A complete installation requires as many as 68,400 blocks. 
  If you choose to perform a partial installation, you can select 
  (tailor) the programming support files that support your DECwindows 
  Motif application development.  Whether you perform a complete or partial 
  installation, this kit provides support for running DECwindows Motif 
  applications on OpenVMS compute servers. 
 
* Do you want to install the entire kit [Y]? No [Return] 
  This installation procedure provides support files for developing 
  DECwindows Motif applications in several programming languages.  These 
  files are needed only to develop applications and are not required to run 
  DECwindows Motif applications.  The free disk space requirement for each 
  programming support file ranges from 3000 to 8000 blocks. 
 
* Do you want to install DECwindows Motif programming support [Y]? [Return] 
  Support files are supplied for the following OpenVMS programming languages: 
 
  FORTRAN, Pascal 
 
  In addition, support files are supplied for programming in the C language 
  using conventions and standards developed at the Massachusetts Institute 
  of Technology. 
 
* Do you want to install all programming language support files [Y]? [Return] 
* Do you want to install DECwindows Motif programming examples [Y]? [Return] 
  You have selected the following portions of the kit: 
 
        o  DECwindows Motif Applications and Run-time Libraries 
 
        o  DECwindows Motif programming examples 
 
        o  DECwindows Motif programming support 
                FORTRAN, Pascal 
                MIT C language programming conventions 
 
* Are these selections correct [Y]? [Return] 
  A registered and loaded product authorization key for DW-MOTIF is 
  required to run any DECwindows Motif for OpenVMS application. If you 
  answer NO to the next question, the installation of DECwindows Motif for 
  OpenVMS will be terminated. 
 
 
        Product:      DW-MOTIF 
        Producer:     DEC 
        Version: 
        Release Date: 
 
 
* Does this product have an authorization key registered and loaded? Yes [Return]
  DECwindows Motif will not start if your system parameters are not 
  correct. 
 
  o If you allow a system shutdown, the installation procedure will 
    reboot the system at the end of the installation.  If your system 
    parameters are incorrect, the installation will run AUTOGEN prior 
    to the system reboot. 
 
  o If you do not allow a system shutdown, the installation procedure 
    will continue, and you will be informed at the end of the 
    installation whether you need to modify your system parameters in 
    order to start DECwindows Motif. 
 
 
    To complete the installation of this product, you should reboot 
    the system.  If it is not convenient to reboot at this time, then 
    enter NO to the following question. 
 
    If you enter NO, the installation procedure will continue. 
 
* Will you allow a system shutdown after this product is installed [YES]? No [Return]
  No further questions will be asked. 
 
%VMSINSTAL-I-RESTORE, Restoring product save set B ... 
%VMSINSTAL-I-RESTORE, Restoring product save set C ... 
%VMSINSTAL-I-RESTORE, Restoring product save set D ... 
%VMSINSTAL-I-RESTORE, Restoring product save set E ... 
%VMSINSTAL-I-RESTORE, Restoring product save set F ... 
%VMSINSTAL-I-RESTORE, Restoring product save set G ... 
%VMSINSTAL-I-RESTORE, Restoring product save set H ... 
%VMSINSTAL-I-RESTORE, Restoring product save set I ... 
%VMSINSTAL-I-RESTORE, Restoring product save set J ... 
%VMSINSTAL-I-RESTORE, Restoring product save set L ... 
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... 
 
  You may safely ignore the following NCP error message(s): 
 
%NCP-I-SUCCESS,  Success 
Object = X$X0 
%NML-I-RECDELET, Database entry deleted 
 
  The Installation Verification Procedure (IVP) should be run after the 
  installation has been completed and DECwindows Motif has been restarted. 
  The IVP can be found in SYS$TEST:DECW$IVP.COM. 
 
  The installation procedure has determined that your system parameters are 
  set correctly and that it will not be necessary to run AUTOGEN or reboot 
  the system. 
 
  If your system is already running DECwindows Motif, restart DECwindows 
  Motif with the following DCL command: 
 
       $ @SYS$MANAGER:DECW$STARTUP RESTART 
 
  If your system is NOT already running DECwindows Motif, start DECwindows 
  Motif with the following DCL command: 
 
       $ @SYS$MANAGER:DECW$STARTUP 
 
                            * * * N O T E * * * 
 
  If you are installing DECwindows Motif from your workstation console, log 
  off after you enter the command to start DECwindows Motif. 
 
 
  The installation procedure has determined that your system parameter values 
  are acceptable.  A reboot of the system is not required. 
 
 
        Installation of DWMOTIFVAXU5 V1.2 completed at 10:57 
 
Enter the products to be processed from the next distribution volume set. 
* Products: [Return]
    VMSINSTAL procedure done at 12:45


Appendix C
Software Components

If you installed DECwindows Motif Version 1.2-5 for OpenVMS using the POLYCENTER Software Installation utility, you can obtain a list of all installed files and the directories and subdirectories into which the files were installed. To obtain this list, enter the following POLYCENTER Software Installation utility command:


$ PRODUCT SHOW OBJECT/product=dwmotif 

Following is a sample output from this command.


OBJECT                                   OBJECT TYPE 
------                                   ----------- 
[000000]                                 directory 
[000000]DEC-AXPVMS-DWMOTIF-V0102-5-1.PCSI$DESCRIPTION file 
[000000]DEC-AXPVMS-DWMOTIF-V0102-5-1.PCSI$TLB file 
[CDA$LIBRARY]                            directory 
[CDA$LIBRARY]CL_DAY.DOC_STYLE            file 
[CDA$LIBRARY]DEFSTYLE.DDIF               file 
[CDE$DEFAULTS]                           directory 
[CDE$DEFAULTS]                           directory 
[CDE$DEFAULTS.SYSTEM]                    directory 
[CDE$DEFAULTS.SYSTEM]                    directory 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS]       directory 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]     directory 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DT.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTCALC.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTCREATE.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTFILE.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTHELLO.DAT file 
. 
. 
. 


Index Contents