Document revision date: 19 July 1999

R
RAID (redundant arrays of independent disks)
volume shadowing support
Read access
for disk directory files
for disk files
granting through protection codes
Read error
if returned when booting
Read/write disk
partitions
Real-time priority
Rebooting
after creation of system files
Rebuilding volumes
Reconfiguration of software installation options
Records
blocking on tapes
size
Recovering lost files
Reducing I/O on system disk
REG$TO_BE_STARTED logical
Registering images with system version dependencies
Reinitializing volumes
Release Notes
extracting from software products
on software products
VMSINSTAL.COM option
Release Notes option
VMSINSTAL.COM
Releasing a job
Remote identifiers
Remote InfoServer device
BIND command
making available
mounting during system startup
Remote log (archive) files
Remote monitoring
limitation
mixed-version OpenVMS Cluster systems
Remote node database
logical name defining location
Remote nodes
definition
Remote printing
Remote queue status
Remote terminals
Removing installed software products
Repairing disk structure errors
REPLY command
canceling a user request #1
canceling a user request #2
closing current operator log file
disabling operator terminals #1
disabling operator terminals #2
enabling operator terminals #1
enabling operator terminals #2
specifying terminal
ensuring that correct volume is mounted
initializing tape
linking continuation volume to volume set
opening a new operator log file #1
opening a new operator log file #2
putting request in wait state
replying to requests #1
replying to requests #2
response not recorded in operator log file
sending messages to users
REPLY/ENABLE=SECURITY command
enabling security operator terminals
Reporting errors
disk structure
Reporting on product dependencies
Reports
AUTOGEN
SHOW CLUSTER
adding classes of data
adding data
adding fields of data
changing default at startup
command to modify
compressing reports
controlling displays #1
controlling displays #2
controlling displays #3
controlling with command procedures #1
controlling with command procedures #2
moving display
organization of
panning
scrolling
REQUEST command
identification number in operator log file
recording request in operator log file
sending requests to an operator #1
sending requests to an operator #2
Requeuing
executing job
pending job
Reserved files
backup log file (BACKUP.SYS)
bad block file (BADBLK.SYS)
continuation file (CONTIN.SYS)
index file (INDEXF.SYS)
list of
master file directory (MFD)
pending bad block log file (BADLOG.SYS)
quota file (QUOTA.SYS)
storage bitmap file (BITMAP.SYS)
volume security profile (SECURITY.SYS)
volume set list file (VOLSET.SYS)
Reset modules
See also Device control modules
Resident images
installing (Alpha)
in system startup
Resource accounting
Resource types
limits
Resource use
producing reports of
Resources
tracking use
Restarting
the queue manager
Restarting OPCOM (operator communication manager)
Restore operations
with BACKUP
Restoring directories
Restoring files
from an image backup
from an incremental backup
levels of directory access
Restoring the queue database
Restricted accounts
RESTUSER.COM command procedure
Resuming printing of an output job #1
Resuming printing of an output job #2
Resuming printing of an output job #3
Resuming queue status
Retained job status
definition
releasing jobs in
Retaining jobs in a queue
changing retention of a job
Rights databases
Rights identifiers
NET$EXAMINE
Rights list
adding to system
RIGHTSLIST.DAT files
default protection
moving to reduce system disk I/O
RIGHTSLIST logical name
defining during system startup
defining to reduce system disk I/O
RMS
access to files at record level
assigns name to file
RMS_EXTEND_SIZE system parameter
Root directory
adding to an existing system disk
Root volume
definition
MFD on
Routing
definition
host-based
initialization passwords
link state
requirements
RSM (Remote System Manager)
startup restrictions
RSX systems
use of ODS-1 file structure with
RT--11 volume
block-addressable #1
block-addressable #2
RTAn devices
RUN command
effect of installed images on
RV60 optical disk drives
supported by UETP
S
Satellites
booting
cross-architecture booting
LAN MOP and DECnet MOP downline load service
migrating to LAN MOP downline load service
SATELLITE_PAGE.COM command procedure #1
SATELLITE_PAGE.COM command procedure #2
execution of during system startup
Save sets #1
Save sets #2
backing up twice with /VERIFY qualifier
Files--11 disk
Get Save Set
VMSINSTAL.COM option
listing the contents of
magnetic tape #1
magnetic tape #2
multivolume
name
network
on multiple tapes
product
storing temporarily during installation
sequential disk
types
SAVEDUMP system parameter #1
SAVEDUMP system parameter #2
SAVEDUMP system parameter #3
Saving the queue database
Scalars
definition
SCBs (storage control blocks)
in storage bitmap file
Scheduling #1
Scheduling #2
batch jobs
print jobs #1
print jobs #2
See also Priority, job scheduling
Scheduling priority
for a batch or print job
changing
SCROLL command
SCROLL keypad function
SCSI (Small Computer Systems Interface)
SCSNODE system parameter
in DECnet-Plus networks
SDA CLUE
dump off system disk
SDA CLUE commands
analyzing the system dump file
saving contents of system dump file
using to archive dump file information
using to collect dump file information
SDA (System Dump Analyzer utility)
See System Dump Analyzer utility
Search lists
priority of installed images
Search path of Help Message database files
Secondary Bootstrap image
role in boot process
SECONDARY day
defining for accounts
Secondary page and swap files
installing during system startup
See Page files; Swap files
Secondary processors
Sections
global
pages
Sectors
Files--11
definition
Security
alarm messages
alarms
enabling
enabling operator terminals
messages in operator log file
network
providing for
OPCOM alarm messages
OpenVMS Cluster
password management
protected subsystems
protecting public disk volumes
protecting queues
protecting the system dump file
risk of compromise by installing images with privileges
specifying alarm events
Security audit log files
closing
creating new version #1
creating new version #2
definition
reviewing
Security auditing #1
Security auditing #2
archive file for each node in a cluster
defining log file in system startup
description #1
description #2
disabling events
displaying using SHOW AUDIT command
enabling operator terminal #1
enabling operator terminal #2
Security management
in SYSMAN on remote nodes
protecting queues
Security operator terminals
Security Server process
intrusion database
network proxy database
Security server (SECURITY_SERVER)
starting
SECURITY_AUDIT.AUDIT$JOURNAL file
moving to reduce system disk I/O
SELECT command
in SHOW CLUSTER
Selective system dump
compared to physical dump #1
compared to physical dump #2
order information is written in
storing
using to reduce size
Sequential-disk save set
initializing
mounting
Server MIB
defined
setting up
subagent objects
subagents
Server queue status
Server queues
Services
bindings
nodes
password protection
write protection
Sessions
maintaining on more than one terminal
maintaining when disconnecting a terminal
SET ACCOUNTING command
controlling which resources are tracked
starting up a new accounting file
SET ACL command
modifying file characteristics #1
modifying file characteristics #2
SET AUDIT command
creating new version of security audit log file
on local node only
enabling security alarms
enabling security auditing
SET command
in conversational boot
SET DEVICE command
spooling printers
SET DIRECTORY command
changing directory characteristics
limiting disk space consumed
modifying disk file characteristics
SET ENTRY command
changing forms
changing scheduling priority
holding jobs #1
holding jobs #2
releasing jobs
requeuing pending jobs
specifying job retention
SET ENVIRONMENT command
SET (Field) command
SHOW CLUSTER
SET FILE command
example
modifying disk file characteristics
using to assign an alias
using to modify file characteristics
SET FUNCTION command
in SHOW CLUSTER
SET HOST/LAT command
SET LOGINS command
SET MAGTAPE command #1
SET MAGTAPE command #2
SET PRINTER command #1
SET PRINTER command #2
in system startup
SET PROFILE command
in SYSMAN
SET QUEUE command
assigning a default form
assigning characteristics #1
assigning characteristics #2
assigning characteristics #3
canceling characteristics
controlling page overflow
mounting a form
setting UIC-based protection on queues
specifying banner pages
specifying job processing options
specifying queue options with
specifying reset modules
SET QUORUM command
avoiding use of /CLUSTER with SYSMAN DO command
SET RIGHTS_LIST command
using to restrict access to ODS-5 volumes
SET SECURITY/ACL command
for vector capability (VAX)
SET SECURITY command
for queues
modifying file characteristics #1
modifying file characteristics #2
using to prevent access to ODS-5 volumes
SET SECURITY/PROTECTION command
changing directory protection
setting default protection
SET/STARTUP command
in conversational boot
SET TERMINAL command #1
SET TERMINAL command #2
despooling a printer
determining characteristics of a LAT line
enabling virtual terminals
in system startup #1
in system startup #2
in system startup #3
setting printer characteristics
SET TIMEOUT command
SET VOLUME command
changing protection code
disabling high-water marking
encoding labels on volumes
modifying disk volume characteristics
modifying file characteristics
performing data checks
specifying file retention periods
SET VOLUME /STRUCTURE_LEVEL=5 command
SETPARAMS.DAT file
Setting up printers #1
Setting up printers #2
Setting up printers #3
Setting up printers #4
in system startup #1
in system startup #2
LAT
Setting up terminals #1
Setting up terminals #2
Setting up terminals #3
in system startup #1
in system startup #2
using system parameters
Setup module
See also Device control modules
specifying in forms
Shadow sets
backing up
mounting disks
restoring
Shareable images #1
Shareable images #2
Shareable images #3
assigning logical names for
Shared address data
address data section
assigns P1 space
executable images can use
image section
Install utility determines content of address data section
shared known images section
using on Alpha systems
Shared resource
definition
Sheet-fed paper
specifying in forms
Short report format
See Console report during UETP
SHOW ACCOUNTING command
SHOW AUDIT command
to display event classes being audited
Show Cluster utility (SHOW CLUSTER)
controlling displays
defining keypad keys
refreshing the screen
reports
controlling displays
formatting #1
formatting #2
formatting #3
initialization file
using
SHOW command
in conversational boot
in SYSGEN
specifying languages #1
specifying languages #2
time and date formats
SHOW CPU command #1
SHOW CPU command #2
SHOW CPU command #3
SHOW DEVICE/FULL command
to display type of volume
SHOW DEVICES command #1
SHOW DEVICES command #2
SHOW DEVICES command #3
checking mounted volumes
determining the status of files #1
determining the status of files #2
devices not shown
examples
for ISO-9660 formatted devices
volume rebuild status
SHOW ENTRY command
SHOW ENVIRONMENT command
SHOW INTRUSION command
SHOW MEMORY command
determining size of page, swap, and dump files
displaying page and swap files
monitoring page file use
showing the size of nonpaged pool
SHOW PROCESS command #1
SHOW PROCESS command #2
SHOW PROFILE command
in SYSMAN
SHOW PROTECTION command #1
SHOW PROTECTION command #2
SHOW QUEUE command
showing all jobs
showing batch jobs
showing brief information
showing complete information
showing completion status for jobs
showing files associated with a job
showing generic queues
showing jobs of a specified status
showing output execution queues
showing queue status
showing total number of jobs
SHOW QUEUE/MANAGERS command
SHOW QUOTA command
SHOW SECURITY command
for queues
SHOW/STARTUP command
in conversational boot
Showing system parameters
with conversational boot #1
with conversational boot #2
with SYSGEN
with SYSMAN
SHOW_CLUSTER$INIT.COM command procedure
SHOW_CLUSTER$INIT logical name
SHUTDOWN.COM command procedure
customizing #1
customizing #2
defining time before shutdown
example
executing with SYSMAN
how to use
options
time of shutdown
order of events
reboot options
required privileges
when to use
SHUTDOWN$DECNET_MINUTES logical name
SHUTDOWN$DISABLE_AUTOSTART logical name #1
SHUTDOWN$DISABLE_AUTOSTART logical name #2
SHUTDOWN$INFORM_NODES logical name #1
SHUTDOWN$INFORM_NODES logical name #2
SHUTDOWN$MINIMUM_MINUTES logical name
SHUTDOWN$QUEUE_MINUTES logical name
SHUTDOWN$TIME logical name
SHUTDOWN$VERBOSE logical name
Site-specific products
startup database
Site-specific shutdown command procedure
SYSHUTDWN.COM
Site-specific startup command procedure
.COM version
creating your own
modifying #1
modifying #2
order of execution #1
order of execution #2
required location
systemwide announcements
.TEMPLATE version
use in VMSKITBLD
SMISERVER process
attributes of
changing
starting
in system startup
SMP_CPUS system parameter #1
SMP_CPUS system parameter #2
Software errors
OPCOM failure
queue manager
when booting
Software license
definition
Software Performance Reports
See SPRs
Software products
consistent installation of
converting formats
copying to new locations
dependencies on other products
installing more than one
reconfiguring after installing
registering noncompliant software
release notes
removing after installing
tracking dependencies of
Software Products Library
using to update InfoServer software
SOGW user category abbreviation
Sort/Merge utility (SORT/MERGE)
optimizing batch queues for
Source parameter
VMSINSTAL.COM
SPAWN function
LAN Control Program (LANCP) utility
Spawn mode
as execution mode for a startup procedure
STABACKIT.COM command procedure #1
STABACKIT.COM command procedure #2
Stalled job status
Stalled queues
status
Standalone BACKUP
booting #1
booting #2
building #1
building #2
definition
qualifiers
relation to Backup utility
using to back up the system disk #1
using to back up the system disk #2
using to back up the system disk #3
using to restore the system disk
Star couplers
definition of
START/CPU command #1
START/CPU command #2
START/QUEUE command
assigning a default form
assigning characteristics #1
assigning characteristics #2
canceling characteristics
controlling page overflow
mounting a form
resuming printing of a suspended job
setting UIC-based protection on queues
specifying autostart information
specifying banner pages
specifying job processing options
specifying queue options with
specifying reset modules
starting a generic queue
starting a nonautostart queue
START/QUEUE/MANAGER command #1
START/QUEUE/MANAGER command #2
caution
creating an additional queue manager
creating queue database files
specifying failover list
specifying name of queue manager
specifying nodes to run the queue manager
storage of
Starting InfoServer Client for OpenVMS
Starting job status
Starting queue status
Starting queues
autostart
in startup command procedure
relationship to activating an autostart queue
nonautostart #1
nonautostart #2
in startup command procedure
Starting the LAT software
with LAT$STARTUP.COM #1
with LAT$STARTUP.COM #2
with LAT$STARTUP.COM #3
Starting the queue manager
initially
restarting #1
restarting #2
STARTNET.COM command procedure #1
STARTNET.COM command procedure #2
STARTUP$AUTOCONFIGURE_ALL symbol
STARTUP.COM command procedure #1
STARTUP.COM command procedure #2
configuring devices #1
configuring devices #2
definition
description
if it does not execute
message indicating execution of
tasks performed by #1
tasks performed by #2
tasks performed by #3
STARTUP command
in SYSMAN
Startup command procedure
booting without
changing execution mode
changing node restrictions
changing startup phase
creating your own #1
creating your own #2
enabling a temporarily disabled
known file lists
node restriction
passing parameters to
preventing from executing
temporarily
setting up output devices
site-independent
specifying an alternate
specifying an alternate
as the default
specifying execution mode
specifying node restrictions
specifying startup phase
starting queues
when errors prevent you from logging in
Startup database
adding files to
changing information in
definition
deleting records in
disabling files in
reenabling disabled files in
restriction
showing contents of
showing name of the target
specifying the current
STARTUP$INTERACTIVE_LOGINS symbol
Startup logical names
network
Startup phases
determining order of
layered product
END
LPBEGIN
LPBETA
LPMAIN
specifying
operating system
BASEENVIRON
CONFIGURE
DEVICE
INITIAL
Startup restrictions
InfoServer Client for OpenVMS software
PATHWORKS
RSM
SYSMAN
STARTUP SET OPTIONS command
STARTUP SHOW OPTIONS command
STARTUP$STARTUP_LAYERED logical name
STARTUP$STARTUP_VMS logical name
STARTUP_P1 system parameter
STARTUP_P2 system parameter
SYSMAN startup logging
Status of jobs
See Job status
Status of queues
See Queues, status
Status of volume rebuilds
$STATUS values
accessing for uninstalled messages
Stock
commands used with
mismatch
troubleshooting
See also Forms
specifying
STOP/CPU command #1
STOP/CPU command #2
Stop pending queue status
STOP/QUEUE command #1
STOP/QUEUE command #2
STOP/QUEUE/MANAGER/CLUSTER command
STOP/QUEUE/NEXT command #1
STOP/QUEUE/NEXT command #2
with autostart queues
STOP/QUEUE/RESET command #1
STOP/QUEUE/RESET command #2
with autostart queues
STOP/QUEUES/ON_NODE command
entering before shutting down a system
relationship to DISABLE AUTOSTART/QUEUES command
Stopped queue status
Stopping queues
abruptly
all queues on a node #1
all queues on a node #2
smoothly
Stopping the queue manager
Storage bitmap file
BITMAP.SYS
definition
reserved file
storage control blocks (SCBs)
StorageWorks RAID Array
SUBMIT command
preventing users from executing
processing of
specifying job retention
specifying scheduling priority
SUBMIT/DELETE command
SUBMON.COM command procedure
sample
used with Monitor utility
Subprocesses
creating
with the LANCP SPAWN command
subprocess creation limit #1
subprocess creation limit #2
Substituting volumes
Subsystem ACEs
example
Subsystems
protected
Supervisor mode
logical names
Suspended job status
Suspending a job
SVD (Supplementary Volume Descriptor)
using to mount ISO 9660 volumes
Swap files
controlling location and size
creating
with AUTOGEN
with SYSGEN
definition
deleting after creating a new version
displaying
fragmentation
installing
in system startup #1
in system startup #2
in system startup #3
in system startup #4
in system startup #5
secondary
with SYPAGSWPFILES.COM procedure
with SYSGEN
location
specifying
monitoring use of #1
monitoring use of #2
mounting disk during system startup #1
mounting disk during system startup #2
moving to improve performance
on a satellite
OpenVMS Cluster satellite node
primary
purging
rebooting after creation
secondary #1
secondary #2
secondary #3
creating to improve system performance
sizes
calculating #1
calculating #2
changing #1
changing #2
changing #3
current
displaying AUTOGEN calculations
increasing
specifying #1
specifying #2
specifying #3
tasks for managing
SWAPFILE symbol
SWAPFILE.SYS file
See also Swap files
SWAPFILEn_NAME symbol #1
SWAPFILEn_NAME symbol #2
SWAPFILEn_SIZE symbol
SWAPFILES.COM command procedure
changing size of primary page, swap, and dump files
Swapping
See also Swap files
to move information between physical memory and files stored on disk
SYCONFIG.COM command procedure
AUTOGEN failure
configuring devices
in startup
modifying to connect special devices
modifying to mount disks early
STARTUP$AUTOCONFIGURE_ALL symbol
SYLOGICALS.COM command procedure #1
SYLOGICALS.COM command procedure #2
in system startup
mounting the queue database disk
redefining location of master file of queue database
redefining location of system files
to specify default state of operator log files
SYLOGIN.COM command procedure #1
SYLOGIN.COM command procedure #2
SYLOGIN.COM command procedure #3
ensuring execution
sample systemwide
SYLOGOUT.COM command procedure
Symbionts
communicating with
default
determining
for LAT printers #1
for LAT printers #2
function of
LATSYM #1
LATSYM #2
PRTSMB on LAT printers
role in processing print jobs
user-written
Symbols
defining
in MODPARAMS.DAT file #1
in MODPARAMS.DAT file #2
for system page, swap, and dump file sizes
for system parameters
NUM_ETHERADAPT
NUM_NODES
PAGEFILEn_NAME
STARTUP$AUTOCONFIGURE_ALL
STARTUP$INTERACTIVE_LOGINS
SWAPFILEn_NAME
Symmetric vector processing configuration
SYPAGSWPFILES.COM command procedure #1
SYPAGSWPFILES.COM command procedure #2
SYPAGSWPFILES.COM command procedure #3
execution of during system startup #1
execution of during system startup #2
modifying to install page and swap files
SYS$ANNOUNCE logical name
SYS$AUDIT_SERVER_INHIBIT logical name #1
SYS$AUDIT_SERVER_INHIBIT logical name #2
SYS$BATCH default queue name
SYS$CONFIG.DAT file
system file
used in autoconfiguration of devices
SYS$DECDTM_INHIBIT logical name
SYS$ERRLOG.DMP file
SYS$ERRORLOG logical name
defining during system startup
defining to reduce system disk I/O
SYS$INPUT logical name
SYS$JOURNAL logical name
SYS$LANGUAGE logical name
SYS$MANAGER:ICC$SYSTARTUP.COM
SYS$MONITOR logical name
defining during system startup
defining to reduce system disk I/O
SYS$OUTPUT logical name
SYS$PRINT default queue name
SYS$QUEUE_MANAGER queue manager
as default queue manager
SYS$REGISTRY logical
SYS$STARTUP logical name #1
SYS$STARTUP logical name #2
SYS$STARTUP logical name #3
SYS$SYLOGIN logical name
SYS$TEST logical name #1
SYS$TEST logical name #2
SYS$TEST logical name #3
SYS$UPDATE logical name
with VMSINSTAL.COM command procedure
SYS$USER_CONFIG.DAT file
adding descriptions to
rebuilding
syntax rules
used in autoconfiguration of devices
user file
SYS$WELCOME logical name
SYSBOOT
using to define port allocation classes
SYSBOOT.EXE file
SYSDUMP.DMP file #1
SYSDUMP.DMP file #2
protection
required location
See also System dump file
SYSECURITY.COM command procedure #1
SYSECURITY.COM command procedure #2
during system startup
SYSHUTDWN.COM command procedure
SYSLOST.DIR file
lost files in
SYSMAN
IO REBUILD/VERIFY command
using to rebuild SYS$USER_CONFIG.DAT file
SYSMAN$NODE_TABLE logical name table
creating
SYSMANINI logical name
SYSPRV privilege
giving rights of system user
SYSTARTUP_VMS.COM command procedure #1
SYSTARTUP_VMS.COM command procedure #2
SYSTARTUP_VMS.COM command procedure #3
creating systemwide announcements
defining announcements in
defining location of systemwide login procedure
defining welcome messages in
disabling error checking in
editing to start DECnet VAX
enabling autostart
freeing page file of dump information
freeing page file of dump information
installing known images #1
installing known images #2
installing resident images (Alpha)
invoking LAT command procedures
invoking the System Dump Analyzer utility
limiting the number of interactive users
making remote InfoServer disks available
making remote InfoServer disks available
message indicating execution of
modifying to perform site-specific operations during system startup
operations performed in
purging the operator log file
saving contents of system dump file in
setting printer device characteristics
setting printer device characteristics
setting terminal device characteristics
setting terminal device characteristics
special consideration about operator assistance for MOUNT command
starting InfoServer Client for OpenVMS
starting InfoServer Client for OpenVMS
starting queues
submitting batch jobs from
SYSTEM account
changing passwords for security of
exercising caution with privileges
in UAF #1
in UAF #2
initial modification
logging in to
setting process quotas for efficient backups
using AUTHORIZE to modify process limits
System console
? message
System crash
See Crash dumps; System failures
System disks
adding an alternate root directory
automatic mounting of
backing up #1
backing up #2
backing up #3
backing up #4
backing up after installation
backing up for software installations
booting from an alternate
building with VMSKITBLD
completing a disk created with VMSKITBLD
configuring a system root added with VMSKITBLD
copying system files from
copying system files using VMSKITBLD
disk space needed to run UETP
fragmentation
installing software on alternate
moving files off to improve system performance
moving page and swap files off
not in volume sets
quotas for
removing and adding optional system files
restoring
saving space by removing optional files
saving space on
testing with UETP
UETP error message #1
UETP error message #2
UETP test image #1
UETP test image #2
System dump
designating order of processes in
System Dump Analyzer utility (SDA)
analyzing the system dump file
in system startup #1
in system startup #2
in system startup #3
COPY command
determining cause of system failure
freeing dump information from the page file
invoked automatically on reboot
saving contents of system dump file
System dump files
analyzing
comparison of physical and selective system dumps
controlling location
copying #1
copying #2
copying #3
creating
default location
definition
deleting after creating a new version
freeing page file
installing
insufficient disk space
investigating cause of system failure
lack of
location
page file used to store
placing on another disk
protecting #1
protecting #2
rebooting after creation
saving contents on reboot #1
saving contents on reboot #2
saving minimal information in
See also SYSDUMP.DMP file
sizes #1
sizes #2
calculating #1
calculating #2
changing #1
changing #2
changing #3
controlling
displaying AUTOGEN calculations
manipulating
minimizing
storing selective portions of memory
System failures
determining cause #1
determining cause #2
reporting to Compaq support representative
saving contents of system dump file after #1
saving contents of system dump file after #2
See also Crash dumps; System dump files
writing of system dump file
System files
duplicating using VMSKITBLD
moving off system disk to improve performance
on public volumes
optional
adding or deleting
System Generation utility (SYSGEN)
and version checking
AUTOCONFIGURE command (VAX)
in system startup
changing page, swap, and dump file sizes
changing page, swap, and dump file sizes
changing system parameter file with
changing system parameters #1
changing system parameters #2
changing system parameters #3
configuring devices
in system startup
CONNECT command (VAX)
in system startup
converting parameters for use with AUTOGEN
CREATE command #1
CREATE command #2
creating a new system parameter file
creating page, swap, and dump files
INSTALL command
in SYPAGSWPFILES.COM
in system startup
installing page, swap, and dump files
in system startup
LOAD command (VAX)
managing system parameters
operator log messages
showing system parameters
System hangup #1
System hangup #2
System libraries
decompressing
System management
centralizing with SYSMAN
clearing counters
creating access control lists (ACLs)
deleting device information
deleting node information
disabling MOP downline load service
displaying device information
displaying LAN device configurations
displaying LAN device parameters
displaying node information
displaying OPCOM messages
displaying status and counters #1
displaying status and counters #2
enabling MOP downline load service
environment
Load Trace facility
on multiple nodes
stopping the LANACP utility
tasks
clusterwide management
System Management utility (SYSMAN)
accessing disks
adding startup files to a startup database #1
adding startup files to a startup database #2
ALF commands
authorization checks in
changing privileges in
changing system parameters
active values
command verification in
configuring devices (Alpha)
in system startup
converting parameters for use with AUTOGEN
creating command procedures for
deleting startup files
disabling startup files
Disk Quota utility
disk quotas with
DISKQUOTA commands
DO command
enabling remote systems to execute commands
enabling startup files
features of
how commands execute
initialization file
IO AUTOCONFIGURE command (Alpha)
in system startup
IO CONNECT command (Alpha)
in system startup
IO LOAD (Alpha)
loading licenses with
management environment
managing an OpenVMS Cluster
managing startup
managing system parameters #1
managing system parameters #2
modifying the system parameter file
PARAMETERS command
privileges required
profile
adjusting
rights limitation
showing system parameters
showing the contents of a startup database
showing the name of the target startup database
shutdown
SMISERVER process
specifying the current startup database
STARTUP command
startup logging
startup restrictions
timeout periods
usage restriction
use of passwords #1
use of passwords #2
using logical names in
using to centralize system management
System messages
See also Messages
using when managing a system
System parameters
ACP cache system
active values #1
active values #2
affected by AUTOGEN calculations
ALPHAVMSSYS.PAR file (Alpha)
automatic setting by AUTOGEN
booting with default
categories by function
changing
checking AUTOGEN's settings
editing MODPARAMS.DAT file
recommended method #1
recommended method #2
specifying values in MODPARAMS.DAT file
with AUTOGEN
with conversational boot #1
with conversational boot #2
with conversational boot #3
with SYSGEN #1
with SYSGEN #2
with SYSMAN #1
with SYSMAN #2
checking before using VMSINSTAL.COM command procedure
controlling
in MODPARAMS.DAT file #1
in MODPARAMS.DAT file #2
in MODPARAMS.DAT file #3
increasing
specifying absolute values
specifying maximum values
specifying minimum values
with ADD_ prefix
with MAX_ prefix
with MIN_ prefix
creating a new parameter file
with SYSGEN
current values #1
current values #2
default values
definition
DUMPBUG
DUMPSTYLE #1
DUMPSTYLE #2
DUMPSTYLE #3
dynamic
effect on other parameters
ERLBUFFERPAGES
ERRORLOGBUFFERS
file extensions
GBLPAGES
GBLSECTIONS
initialization at boot time
managing
MULTIPROCESSING
MVTIMEOUT #1
MVTIMEOUT #2
NPAGEDYN
on disk
in ALPHAVMSSYS.PAR file (Alpha)
in VAXVMSSYS.PAR file (VAX)
QUANTUM
recommended method for changing #1
recommended method for changing #2
RMS_EXTEND_SIZE
SAVEDUMP #1
SAVEDUMP #2
SCSNODE
showing
with conversational boot #1
with conversational boot #2
with conversational boot #3
with SYSGEN
with SYSMAN #1
with SYSMAN #2
SMP_CPUS #1
SMP_CPUS #2
STARTUP_P1
STARTUP_P2
storing your changes for use with AUTOGEN
symmetric multiprocessing
TAPE_MVTIMEOUT #1
TAPE_MVTIMEOUT #2
TTY_DEFCHAR
TTY_DEFCHAR2 #1
TTY_DEFCHAR2 #2
types of
dynamic
general
major
UAFALTERNATE
user definable
VAXVMSSYS.PAR file (VAX)
vector processing
VECTOR_MARGIN
VECTOR_PROC
VIRTUALPAGECNT
when incorrect values prevent the system from booting
WSMAX #1
WSMAX #2
System passwords
dictionary of
System shutdown
adjusting quorum when shutting down a node
after software installation
allowing batch and print jobs to complete before
caution about timing of system halt
checking for existence of system files before
customizing
with SYSHUTDWN.COM command procedure
defining the minimum number of minutes before shutdown
emergency procedures
console
OPCCRASH #1
OPCCRASH #2
for an entire OpenVMS Cluster
notification of
options
automatic reboot
manual reboot
specifying time interval between DISABLE AUTOSTART/QUEUES and STOP/QUEUES/ON_NODE commands
time of shutdown
order of events
orderly
procedures for performing
saving AUTOGEN feedback data
SHUTDOWN.COM
example
how to use
when to use
stopping queues before
with SYSMAN
System startup
analyzing a crash dump
assigning systemwide logical names
booting with minimum
CONFIGURE phase
configuring devices #1
configuring devices #2
special (Alpha)
special (VAX)
controlling when booting
creating systemwide announcements
databases
defining location of systemwide login procedure
definition of logical names #1
definition of logical names #2
description
determining order of phases
displaying startup commands as they execute
enabling autostart
enabling operator console
enabling operator log file
events
order of
possibility of future change in order
execution of AUTOCONFIGURE command
execution of login procedures
execution of site-specific startup command procedures
freeing dump information from page file
in an emergency
with default system parameters
without startup and login procedures
without the UAF
installing images #1
installing images #2
installing page and swap files #1
installing page and swap files #2
installing page and swap files #3
installing page and swap files #4
installing page and swap files #5
limiting the number of interactive users
LMF database
loading of device drivers
loading of licenses
loading of Product Authorization Keys (PAKs)
location of files used in
logging with SYSMAN
making remote InfoServer devices available
making remote InfoServer disks available
managing with SYSMAN
messages
indicating execution of site-specific startup
indicating lack of installed page file
mounting disk for page and swap files
mounting the queue database disk
performing site-specific operations
purging the operator log file
saving contents of system dump file #1
saving contents of system dump file #2
setting
device characteristics in
printer device characteristics
terminal device characteristics
setting up a LAT network
starting CONFIGURE process
starting InfoServer Client for OpenVMS software
starting LMF (License Management Facility)
starting queues
starting SMISERVER process
starting system processes
starting the DECnet network
starting the queue manager
startup command procedures
submitting batch jobs
suppressing autoconfiguration #1
suppressing autoconfiguration #2
tasks
VMS$PHASES.DAT database
System time
resetting after January 1st
System users (security category)
defining with MAXSYSGROUP parameter
qualifications for
System version
registering images with dependencies on
System volumes
definition
Systems
downline loading with InfoServer
Systemwide logical names
SYSTEST account
in UAF
initial modification
logging in
for UETP #1
for UETP #2
privileges required for UETP
quotas required to run UETP
SYSTEST directory
creating for UETP
function during UETP
SYSTEST_CLIG account
in UAF
reenabling for UETP
requirements for UETP #1
requirements for UETP #2
SYSUAF.DAT files
definition
moving to reduce system disk I/O
SYSUAF logical name
defining during system startup
defining to reduce system disk I/O
SYSUAFALT.DAT files

	privacy and legal statement
6017PRO_INDEX_012.HTML