Compaq TP Desktop Connector
for ACMS
Installation Guide


Previous Contents Index


Chapter 2
Installing TP Desktop Connector from the Software Products Library CD

This chapter explains how to install Compaq TP Desktop Connector and Compaq TP Desktop Connector gateway for ACMS from the OpenVMS Software Products Library CD. Table 2-1 shows the contents of the TP Desktop Connector directory on the library CD.

Table 2-1 TP Desktop Connector Files on the Software Products Library CD
Name Description
ACMSDIA031.* TP Desktop Connector Gateway for ACMS savesets
DSKCON_IG_ACMS.PS
DSKCON_IG_ACMS.TXT
This book, formatted for PostScript or plain text
DSKCON_ACMS_RBI Read Before Installing letter
DSKCON_ACMS_RELEASE_NOTES.PS
DSKCON_ACMS_RELEASE_NOTES.TXT
New features and product restrictions
DSKCON_ACMS_SPD Software Product Description document
TPWA031.* TP Desktop Connector client savesets

2.1 Installing the TP Desktop Connector Gateway for ACMS Software

Installing the gateway kit from the Software Products Library CD is the same as from the TP Desktop Connector Gateway for ACMS CD, except for the location of the product saveset. Refer to the Software Products Library Master Index for the directory name on the library CD. Instructions for VMSINSTAL are in Chapter 9.

2.2 Installing the Client Kit

To install the client kit on the OpenVMS system, while logged in under the SYSTEM account at the DCL prompt, type a command in the following format:


$ @SYS$UPDATE:VMSINSTAL TPWA031 device-name:[directory-name]

The value of device-name: is the specification of the drive on which the CD-ROM is mounted and directory-name is the location of the product saveset on the library CD (refer to the Software Products Library Master Index for the directory name). Example 2-1 shows the output from a sample installation.

Example 2-1 Sample Client Installation

        OpenVMS VAX Software Product Installation Procedure V6.2 
 
 
It is 8-DEC-1998 at 11:31. 
 
Enter a question mark (?) at any time for help. 
 
%VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account. 
%VMSINSTAL-W-ACTIVE, The following processes are still active: 
        NOTES$0145_11* 
        DECW$TE_0C4F 
        KNEELAND 
        FAL_14260004 
        DECW$TE_0688 
        _FTA57: 
        _FTA58: 
        ACMS01EXC001000 
        ACMS01EXC004000 
        ACMS004SP001000 
        ACMS01EXC00A000 
        ACMS00ASP001000 
        ACMS00ASP002001 
* Do you want to continue anyway [NO]? y
* Are you satisfied with the backup of your system disk [YES]? 
 
The following products will be processed: 
 
  TPW V3.1 
 
 
        Beginning installation of TPWA V3.1 at 11:31 
 
%VMSINSTAL-I-RESTORE, Restoring product save set A ... 
 
Installation of TP Desktop Connector for ACMS V3.1 client software started. 
 
************************************************************************** 
*                      Copyright (C) 1990, 1999 by                       * 
*              COMPAQ Computer Corporation, Houston, Texas               * 
*          ALL RIGHTS RESERVED.  UNPUBLISHED RIGHTS RESERVED UNDER THE   * 
*                COPYRIGHT LAWS OF THE UNITED STATES.                    * 
************************************************************************** 
 
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  SYS$COMMON:[ACMSDI.V 
MS_CLIENTS]. 
%VMSINSTAL-I-RESTORE, Restoring product save set B ... 
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  SYS$COMMON:[ACMSDI.N 
ONVMS_CLIENTS]. 
%VMSINSTAL-I-RESTORE, Restoring product save set C ... 
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  SYS$COMMON:[SYSHLP.E 
XAMPLES.ACMSDI.AVERTZ.MOTIF]. 
%VMSINSTAL-I-RESTORE, Restoring product save set D ... 
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... 
 
Installation of TP Desktop Connector for ACMS V3.1 client software has ended. 
 
 
        Installation of TPWA V3.1 completed at 11:33 
 
 
        VMSINSTAL procedure done at 11:33 
 
 

See Chapter 3 to continue with postinstallation tasks.


Chapter 3
After Installing from the Software Products Library CD

This chapter describes the procedures, on both the OpenVMS system where the gateway kit was installed and on your target desktop system, that are required for server-side and client-side applications to run and communicate.

3.1 After Installing the Gateway Kit

Post-installation tasks for TP Desktop Connector Gateway for ACMS software are the same whether you install from the Software Products Library CD or the TPware Product Suite CD (see Chapter 10).

For TP Desktop Connector on the Software Products Library, the server-side sample application is part of the client kit, not the gateway kit. The client services files for OpenVMS are laid down when you use VMSINSTAL on the TPWA031 savesets. See Section 3.3 for information on the server-side Avertz sample application.

3.2 After Installing TP Desktop Connector Client Kit

After installing the client kit from the Software Products Library CD, all the files needed for OpenVMS client and sample applications are in place. If you are developing an OpenVMS client application, you should edit a startup file as shown in Section 3.2.1. If you are developing a client application for a different desktop platform, you should follow Sections 3.2.1 and 3.2.2.

3.2.1 Editing Startup Files

If TP Desktop Connector Gateway for ACMS is already installed on the same system, edit the gateway startup file, SYS$STARTUP:ACMSDI$STARTUP.COM. Remove the comment character (!) from the following logical name definitions for the client directories:


$! The next three logical name definitions pertain to TP Desktop Connector 
$! client libraries and Motif samples and should be defined only after installing 
$! clients on the same system where the Gateway is installed. 
$! 
$! define/system acmsdi$vms sys$common:[acmsdi.vms_clients] 
$! define/system acmsdi$nonvms_clients sys$common:[acmsdi.nonvms_clients] 
$! define/system acmsdi$examples_avertz_motif - 
$!               sys$common:[syshlp.examples.acmsdi.avertz.motif] 

If the gateway is on a different system, add the following logical name definitions to your system startup file:


$ define/system acmsdi$vms sys$common:[acmsdi.vms_clients] 
$ define/system acmsdi$nonvms_clients sys$common:[acmsdi.nonvms_clients] 
$ define/system acmsdi$examples_avertz_motif - 
                sys$common:[syshlp.examples.acmsdi.avertz.motif] 

3.2.2 After Installing Non--VMS Clients

In addition to OpenVMS client libraries, the client installation loads the self-extracting archive files on your OpenVMS system (see Table 3-1). (The logical name ACMSDI$NONVMS_CLIENTS is defined in Section 3.2.1.)

Table 3-1 Contents of ACMSDI$NONVMS_CLIENTS
ALPHA32.EXE Runtime and development kit for the entire TPware product suite on Compaq Alpha platforms running Microsoft Windows NT
DUNIX.EXE TP Desktop Connector client services 1 and samples for Tru64 UNIX systems
INTEL16.EXE TP Desktop Connector client services 1 and samples for 16-bit Microsoft operating systems (DOS, Windows 3.11, or Windows 95) on Intel platforms
INTEL32.EXE Runtime and development kit for the entire TPware product suite on Intel platforms running 32-bit Microsoft operating systems (Windows NT or Windows 95)
ACMS_DESKTOP.INSTALLER TP Desktop Connector client services 1 and samples for Apple Macintosh systems


1Formerly known as the ACMS Desktop "portable API" services.

After installing the TP Desktop Connector client kit on an OpenVMS system, transfer the appropriate archive file to your desktop system and execute it (see Sections 3.2.2.1 through 3.2.2.3). After you expand the appropriate archive, the resulting files can then be used.

3.2.2.1 Transfering Client Files to a 32-bit Microsoft System

To place the client files on a 32-bit system on an Intel platform, transfer the appropriate archive file from the ACMSDI$NONVMS_CLIENTS directory on the OpenVMS system. For example:

  1. Use a network file transfer utility such as FTP to copy from the OpenVMS system the INTEL32.EXE file (see Table 3-1). For example:
    1. On the client system, create a subdirectory to store the software:


      > mkdir c:\tpwa031
      

    2. Change directory to the newly created subdirectory:


      > cd c:\tpwa031
      

    3. Connect to the OpenVMS system that contains the archive file:


      > ftp nodename
         .
         .
         .
      login to host
         .
         .
         .
      FTP>
      

      The value of nodename is the name of the OpenVMS system on which the archive is installed. At the FTP prompts, supply the OpenVMS user name and password. If you successfully log on to the OpenVMS system, type commands at the FTP prompt to copy the archive file from the OpenVMS directory to the client system and close the FTP utility. For example:


      FTP> binary
      FTP> cd ACMSDI$NONVMS_CLIENTS:
      FTP> get intel32.exe
      FTP> quit
      

  2. On the client system, expand the archive file and delete it to recover disk space. For example:


    > intel32
    > del intel32.exe
    

See Section 5.2 for information on setting up an environment for 32-bit Microsoft systems.

3.2.2.2 Transfering Client Files to a 16-bit Microsoft System

To place the client files on a 16-bit system on an Intel platform, transfer the appropriate archive file from the ACMSDI$NONVMS_CLIENTS directory on the OpenVMS system and expand it. For example:

  1. Use a network file transfer utility such as FTP to copy from the OpenVMS system the INTEL16.EXE file (see Table 3-1). For example:
    1. On the client system, create a subdirectory to store the software:


      > mkdir c:\tpwa031
      

    2. Change directory to the newly created subdirectory:


      > cd c:\tpwa031
      

    3. Connect to the OpenVMS system that contains the archive file:


      > ftp nodename
         .
         .
         .
      login to host
         .
         .
         .
      FTP>
      

      The value of nodename is the name of the OpenVMS system on which the archive is installed. At the FTP prompts, supply the OpenVMS user name and password. If you successfully log on to the OpenVMS system, type commands at the FTP prompt to copy the archive file from the OpenVMS directory to the client system and close the FTP utility. For example:


      FTP> binary
      FTP> cd ACMSDI$NONVMS_CLIENTS:
      FTP> get intel16.exe
      FTP> quit
      

  2. On the client system, expand the archive file and delete it to recover disk space. For example:


    > intel16
    > del intel16.exe
    

For client services installation and setup, see Section 6.2.

3.2.2.3 Transfering Client Files to a Tru64 UNIX System

To place the client files on a Tru64 UNIX system, transfer the appropriate archive file from the ACMSDI$NONVMS_CLIENTS directory on the OpenVMS system. For example:

  1. Use a network file transfer utility such as FTP to copy from the OpenVMS system the dunix.exe file (see Table 3-1). For example:
    1. On the client system, create a directory under your home directory:


      > mkdir tpwa031dir
      

    2. Change to the new directory.


      > cd tpwa031dir
      

    3. Connect to the OpenVMS system that contains the archive file.


      > ftp nodename
         .
         .
         .
      login to host
         .
         .
         .
      ftp>
      

      The value of nodename is the name of the OpenVMS system on which the archive is installed. At the FTP prompts, supply the OpenVMS user name and password. If you successfully log on, type commands at the FTP prompt to copy the archive file and close the FTP utility. For example:


      ftp> binary
      ftp> cd sys$common:[acmsdi.nonvms_clients]
      ftp> get dunix.exe
      ftp> quit
      

  2. On the client system, expand the archive file and delete it to recover disk space. For example:


    > chmod 755 dunix.exe
    > ./dunix.exe
    > rm dunix.exe
    

The archive expands into two tar files (see Section 6.4).

3.2.3 Installing the Client Services Interface on OpenVMS Systems

The client services library is preconfigured for DECnet network access. To build applications that use NetWare or TCP/IP as a transport, you must reconfigure the library before creating executable programs.

The following steps are necessary to set up the client services library for NetWare or TCP/IP access:

  1. Copy the library and related files to your home directory with the following command:


    $ copy/log ACMSDI$VMS:*.* []
    

  2. Remove the DECnet object from the library with the following command:


    $ library/delete = net_decnet acmsdi$client_objlib.olb
    

  3. For NetWare, insert the NetWare transport access module into the library with the following command:


    $ library/insert acmsdi$client_objlib.olb net_netware.obj
    

    For TCP/IP, insert the TCP/IP transport access module into the library with the following command:


    $ library/insert acmsdi$client_objlib.olb net_tcpip.obj
    

After these steps, you are ready to build TP Desktop Connector applications that use NetWare or TCP/IP as a transport. Table A-1 shows the files that are added to your desktop system during the installation of the TP Desktop Connector client services for OpenVMS.

3.2.4 Verifying the Motif Client Sample on OpenVMS

Copy, compile, link, and run the source code for the sample client program to verify your capability to build applications.

To build the sample application, follow these steps:

  1. Copy the client sample files to your home directory using the following command:


    $  copy/log ACMSDI$EXAMPLES_AVERTZ_MOTIF:*.* []
    

    Table A-2 lists the files that are added to your desktop system.

  2. If you have MMS, use the MMS makefile provided to build the m_avertz sample application. In the sample directory, run MMS using the following command:


    $ MMS/DESC=M_AVERTZ
    

    If you download TP Desktop Connector libraries to a different location, edit the makefile to indicate the new location of the libraries.

    Note

    On OpenVMS Alpha systems, the makefile expects the logical ACMSDI$VMS_ALPHA to point to the directory that contains the TP Desktop Connector client library. In addition, on OpenVMS Alpha systems, the first time that the makefile tries to create the DECwindows library, the makefile fails. When this happens, rerun MMS to continue the build.<>

    If you do not have MMS, use the makefile as a guide to build the application yourself.
  3. Run the application by entering the following command:


    > run m_avertz/nodebug
    

The m_avertz application displays the menu bar of the AVERTZ Car Reservation System. If you want the sample desktop client program to communicate with the ACMS application, follow the procedures in Section 6.3.3 to set up the sample application on the ACMS system. After you set up the ACMS system, use the Session menu to sign in to the ACMS system. After you sign in, you can use the Rental menu to run the reserve task of the AVERTZ application.

The installation procedure is now complete and verified.

3.3 Setting Up the Avertz ACMS Sample Application on an OpenVMS System

The command procedure VR_DA_RUNTIME_SETUP.COM sets up the sample application. You need SYSPRV privilege to run the procedure. Refer to the file ACMSDI$VR_APPLICATION_INFO.TXT in the ACMSDI$EXAMPLES_AVERTZ directory for more information on setting up the sample.

To prepare the AVERTZ sample application on the Compaq OpenVMS system, do the following:

  1. Run the command procedure to set up the application:


    $ @ACMSDI$EXAMPLES_AVERTZ:VR_DA_RUNTIME_SETUP
       .
       .
       .
    $ 
    

  2. Start the ACMS system (if necessary) and the application:


    $ ACMS/START SYSTEM
    $ ACMS/START APPLICATION VR_DA_APPL
    

  3. Perform other management tasks related to your system, for example, authorizing user accounts. Refer to the management information in Compaq TP Desktop Connector for ACMS Client Application Programming Guide.

The following sections provide additional information about using the Avertz sample application on the ACMS OpenVMS system.

3.3.1 Using the Avertz ACMS Sample with Rdb Version 6.0 with Multiversion

When you execute the VR_DA_RUNTIME_SETUP.COM file to set up the sample application, this command file invokes two option files, VR_READ_SERVER.OPT and VR_UPDATE_SERVER.OPT, which refer to the SYS$LIBRARY:SQL$USER library. On a system with Rdb Version 6.0 with multiversion installed, the SYS$LIBRARY:SQL$USER file is not available. Instead, the version number is appended to the file name, for instance, SYS$LIBRARY:SQL$USER60.

To work around this naming mismatch problem, you can define the logical name SQL$USER to reference the appropriate library file. For example:


$ DEFINE SQL$USER SYS$LIBRARY:SQL$USER60

Modify the linker options files:

Replace the line


SYS$LIBRARY:SQL$USERnn.OLB/LIBRARY 

with the following:


SYS$USER/LIBRARY 


Previous Next Contents Index