| Previous | Contents | Index |
The Netlogon Parameters key may include values related to network logon. The NetLogon service is started automatically at server startup.
The Netlogon Parameters key is:
SYSTEM\CurrentControlSet\Services\Netlogon\Parameters |
Table A-4, Netlogon Service Values, lists the values that may be stored in the Netlogon Parameters key.
| Value | Description | |
|---|---|---|
| Pulse | Specifies the number of seconds that the primary domain controller waits before sending update notices to each backup domain controller and member server. | |
| Valid Data: |
Minimum: 60 seconds
Maximum: 3600 seconds |
|
| Default Data: | 300 seconds (5 minutes) | |
| LANMAN.INI Section: | Netlogon | |
| LANMAN.INI Keyword: | pulse | |
| Parameter Type: | Static | |
| Data Type: | Integer | |
| Randomize | Specifies the number of seconds that a backup domain controller randomizes a request to get updates after receiving an update notice from the primary domain controller. This parameter decreases the odds of servers in the same domain requesting an update from the primary domain controller at the same time. | |
| Valid Data: |
Minimum: 5 seconds
Maximum: 120 seconds |
|
| Default Data: | 30 seconds | |
| LANMAN.INI Section: | Netlogon | |
| LANMAN.INI Keyword: | randomize | |
| Parameter Type: | Static | |
| Data Type: | Integer | |
| Scripts | Specifies the location of logon scripts. Refer to Section 3.1.8, Specifying Logon Scripts, for information about logon scripts. | |
| Default Data: | ||
| PWRK$LMROOT:[LANMAN.REPL.IMPORT.SCRIPTS] | ||
| LANMAN.INI Section: | Netlogon | |
| LANMAN.INI Keyword: | scripts | |
| Parameter Type: | Static | |
| Data Type: | String | |
| Update | Indicates whether the backup domain controller requests a full synchronization when it starts. This parameter applies only to a backup domain controller and is ignored by the primary domain controller. | |
| Valid Data: |
YES
NO |
|
| Default Data: | NO | |
| LANMAN.INI Section: | Netlogon | |
| LANMAN.INI Keyword: | update | |
| Parameter Type: | Static | |
| Data Type: | String | |
A.2.4 Advanced Server Process Parameters
The Advanced Server Process Parameters key may include values that
define the way the server process operates in response to resource
requests.
The Advanced Server Process Parameters key is:
SYSTEM\CurrentControlSet\Services\AdvancedServer\ProcessParameters |
Table A-5, Advanced Server Process Parameter Values, lists the values that may be stored in the Advanced Server Process Parameters key.
| Value | Description | |
|---|---|---|
| NumCLIENT_SESSION | Specifies the number of links for internal communication that this server can initiate. This represents the maximum number of domains that this domain can trust, plus one (number of trusted domains plus 1). | |
| Valid Data: |
Minimum: 5
Maximum: 128 |
|
| Default Data: | 32 | |
| LANMAN.INI Section: | Netlogon | |
| LANMAN.INI Keyword: | maxclisess | |
| Parameter Type: | Static | |
| Data Type: | Integer | |
| NumSERVER_SESSION | Specifies the number of links used for internal communication that this server can accept. This number must include the number of domains that trust this domain, the number of backup domain controllers in this domain, and the number of Windows NT workstations in this domain (trusting domains + BDCs + NT workstations). | |
| Valid Data: |
Minimum: 5
Maximum: unlimited |
|
| Default Data: | 200 | |
| LANMAN.INI Section: | Netlogon | |
| LANMAN.INI Keyword: | maxsrvsess | |
| Parameter Type: | Static | |
| Data Type: | Integer | |
A.2.5 Advanced Server Share Parameters
The Advanced Server Share Parameters key may include values that define
the shares created automatically by Advanced Server.
If both Autoshare and NoAutoshare values contain the same device name, the NoAutoshare definition takes precedence.
(See Section 4.2.3.2, Defining Autoshares, for more information about defining autoshares.)
The Advanced Server Share Parameters key is:
SYSTEM\CurrentControlSet\Services\AdvancedServer\ShareParameters |
Table A-6, Advanced Server Share Parameter Values, lists the values that may be stored in the Advanced Server Share Parameters key.
| Value | Description | |
|---|---|---|
| Autoshare | Specifies a synonym for the autoshare name created by default for an OpenVMS disk device. The value for this keyword is a list of OpenVMS device names (or volume labels) and share name synonym to which each device maps. | |
| Default Data: | All OpenVMS disk devices are automatically shared, and share names are based on the volume label of each disk device. | |
| LANMAN.INI Section: | VMSSERVER | |
| LANMAN.INI Keyword: | autoshare | |
| Parameter Type: | Static | |
| Data Type: | Expanded string | |
| NoAutoshare | Specifies a disk device or list of devices that should not be automatically shared when the server starts. Autosharing DFS devices is not recommended. | |
| Valid Data: | Up to 512 characters, including commas | |
| Default Data: | dad,_dfs | |
| LANMAN.INI Section: | VMSSERVER | |
| LANMAN.INI Keyword: | noautoshare | |
| Parameter Type: | Static | |
| Data Type: | Expanded string | |
| Autoshare_ nodename | Specifies a synonym for the autoshare name created by default for an OpenVMS disk device on the system specified by nodename. The value for this keyword is a list of OpenVMS device names (or volume labels) and share name synonym to which each device maps. This value associates the autoshare list with the specific node in an OpenVMS cluster. | |
| Default Data: | All OpenVMS disk devices are automatically shared, and share names are based on the volume label of each disk device. | |
| LANMAN.INI Section: | NODE_ nodename | |
| LANMAN.INI Keyword: | autoshare | |
| Parameter Type: | Static | |
| Data Type: | Expanded string | |
| NoAutoshare_ nodename | Specifies a disk device or list of devices that should not be automatically shared when the specified server starts. This value associates the noautoshare list with the specific node in an OpenVMS cluster. | |
| Valid Data: | Up to 512 characters, including commas | |
| Default Data: | dad,_dfs | |
| LANMAN.INI Section: | NODE_ nodename | |
| LANMAN.INI Keyword: | noautoshare | |
| Parameter Type: | Static | |
| Data Type: | Expanded string | |
A.2.6 Advanced Server Parameters
The Advanced Server Parameters key may contain values that define how
the Advanced Server services operate on server startup.
The Advanced Server Parameters key is:
SYSTEM\CurrentControlSet\Services\AdvancedServer\Parameters |
Table A-7, Advanced Server Parameters Values, lists the values that may be stored in the Advanced Server Parameters key.
| Value | Description | |
|---|---|---|
| ServerServices |
Specifies the services that start automatically when the server is
started. Because services are started in the order they appear in this
registry parameter, you must ensure that NetLogon appears before any
services that require it.
The Browser service is not controlled by this keyword. It is started automatically when the Server service starts. |
|
| Valid Data: | alerter, netlogon,browser | |
| Default Data: | alerter, netlogon | |
| LANMAN.INI Section: | VMSSERVER | |
| LANMAN.INI Keyword: | srvservices | |
| Parameter Type: | Static | |
| Data Type: | Expanded string | |
| DomainName | Defines the name of the domain that the server is in. Do not change the domain name by editing this value in the OpenVMS Registry. Use the PWRK$CONFIG.COM configuration procedure to change the domain name. | |
| Valid Data: | Up to 15 characters | |
| Default Data: | LANGROUP | |
| LANMAN.INI Section: | WORKSTATION | |
| LANMAN.INI Keyword: | domain | |
| Parameter Type: | Static | |
| Data Type: | String | |
| LanmanIniMigrated | Specifies when the parameters in the LANMAN.INI file were migrated to the OpenVMS Registry. | |
| Valid Data: | Date | |
| Default Data: | NO | |
| Parameter Type: | Static | |
| Data Type: | String | |
| CodePage | Specifies the code page to use when interpreting DOS client computer file names. | |
| Valid Data: |
Minimum: 1
Maximum: unlimited |
|
| Default Data: | 437 | |
| Parameter Type: | Static | |
| Data Type: | String | |
A.2.7 Advanced Server Static Parameters
The Advanced Server Static Parameters key may contain values that
define how the Advanced Server services operate on server startup.
The Advanced Server Static Parameters key is:
SYSTEM\CurrentControlSet\Services\AdvancedServer\StaticParameters |
Table A-8, Advanced Server Static Parameters Values, lists the values that may be stored in the Advanced Server Static Parameters key.
| Value | Description | |
|---|---|---|
| MaxClients | Specifies the maximum number of clients. | |
| Valid Data: |
Minimum: 1
Maximum: unlimited |
|
| Default Data: | 50 | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | maxclients | |
| Parameter Type: | Static | |
| Data Type: | Integer | |
A.2.8 Lanman Server Parameters
The Lanman Server Parameters key path may contain parameters that
define the operation of the server, as shown in the following table.
The Lanman Server Parameters key path is:
SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters |
Table A-9, Lanman Server Parameter Values, lists the values that may be stored in the Lanman Server Parameters key.
| Value | Description | |
|---|---|---|
| AccessAlert | Specifies the number of resource access violations that can occur before the server sends an alert to the alertnames list. Refer to Section 6.1.2, Automatic Alerts for more information about managing alert messages. | |
| Valid Data: |
Minimum: 0
Maximum: unlimited |
|
| Default Data: | 5 | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | accessalert | |
| Parameter Type: | Dynamic | |
| Data Type: | Integer | |
| AutoDisconnect | Specifies the interval, in minutes, that the server waits before dropping the virtual circuit to an inactive client. | |
| Valid Data: |
Minimum: 0
Maximum: unlimited |
|
| Default Data: | 0 (no automatic disconnect) | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | autodisconnect | |
| Parameter Type: | Dynamic | |
| Data Type: | Integer | |
| ErrorAlert | Specifies the number of errors that can occur before the server sends an alert to the alertnames list. | |
| Valid Data: |
Minimum: 0
Maximum: unlimited |
|
| Default Data: | 5 | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | erroralert | |
| Parameter Type: | Dynamic | |
| Data Type: | Integer | |
| LogonAlert | Specifies the number of logon violations that can occur before the server sends an alert to the alertnames list. | |
| Valid Data: |
Minimum: 0
Maximum: unlimited |
|
| Default Data: | 5 | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | logonalert | |
| Parameter Type: | Dynamic | |
| Data Type: | Integer | |
| SrvAnnounce | Specifies the number of seconds at which the server announces its presence to the network. This parameter has effect only if the Hidden value is set to NO (see below). | |
| Valid Data: |
Minimum: 1
Maximum: unlimited |
|
| Default Data: | 180 seconds | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | srvannounce | |
| Parameter Type: | Static | |
| Data Type: | Integer | |
| SrvComment | Specifies the descriptive message that the server sends when it announces its presence to the network. | |
| Valid Data: | Up to 48 characters, including spaces | |
| Default Data: | Advanced Server for OpenVMS Systems | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | srvcomment | |
| Parameter Type: | Dynamic | |
| Data Type: | String | |
| Hidden | Specifies whether the server is hidden on the network. If the server is not hidden, it announces its presence at the interval set by the SrvAnnounce parameter and can be viewed using the ADMINISTER SHOW COMPUTERS command. | |
| Valid Data: |
YES
NO |
|
| Default Data: | NO | |
| LANMAN.INI Section: | SERVER | |
| LANMAN.INI Keyword: | srvhidden | |
| Parameter Type: | Dynamic | |
| Data Type: | String | |
| UserPath | Specifies the OpenVMS system directory on the server to be used as a default parent directory for home directories for new user accounts. Refer to Section 3.1.10, Specifying Home Directories for more information about home directories. | |
| Valid Data: | Up to 255 characters. | |
|
Default Data:
PWRK$LMROOT:[LANMAN.ACCOUNTS.USERDIRS] |
||
| LANMAN.INI Section: | SYSTEM | |
| LANMAN.INI Keyword: | userpath | |
| Parameter Type: | Dynamic | |
| Data Type: | Expanded string | |
| Previous | Next | Contents | Index |