DECprint Supervisor for OpenVMS
System Manager's Guide

Chapter 6
6	Specifying Separation, Log, and Error Pages
6.1	What Are Separation Pages?
6.2	Enabling Job Separation Pages
6.2.1	Error Messages on the Trailer Page
6.2.2	Suppressing Job Trailer Pages
6.2.3	Specifying a Special Input Tray for Job Burst and Flag Pages
6.3	Enabling File Separation Pages
6.4	Adding a System Message to Separator Pages
6.5	Requesting Job Log Pages
6.6	The File Error Page
Chapter 7
7	Creating Setup Modules and Device Control Libraries
7.1	What Is a Setup Module?
7.2	Locating Setup Modules
7.2.1	Locating Custom Setup Modules
7.2.2	Displaying the Contents of a Setup Module
7.3	Creating Custom Setup Modules
7.4	Creating Device Control Libraries
7.4.1	Putting Setup Modules in Libraries
7.4.2	Specifying a Library Search List
7.4.3	Device Control Libraries Must Exist for Queue to Start
7.4.4	Preserving Custom Setup Modules During Upgrades
7.5	Including Setup Modules in Print Job
7.6	Persistently Loading PostScript Resources
7.7	Changing the Default Character Set for PCL and Proprinter Print Jobs
7.8	Specifying Printer Resolution with Setup Module
7.9	Modifying DECimage Parameters with Setup Modules
7.10	Providing Access to Font Cartridge Emulation
7.11	Device Control Library Cache Feature
7.12	Printing on Unrecognized Printers
Chapter 8
8	Creating and Maintaining Form Definitions
8.1	Associating Setup Modules with Forms
8.2	Associating a Form with a Print Queue
8.3	Creating Form Definitions for ANSI Files
8.4	Displaying Forms and Their Attributes
8.5	Deleting a Form
8.6	Using the Default ANSI Form Definition
Chapter 9
9	Charging Users for Printer Resources
9.1	Accounting Information Supplied by the DECprint Supervisor Software
9.2	Accounting Information Supplied by the Job Controller
9.2.1	Accounting Fields Left Blank by the Job Controller
9.2.2	Accounting Fields Filled with Zeros by the Job Controller
9.3	Compatibility with Mechanical Page Counters
Chapter 10
10	Printer-Specific Information
10.1	Apple LaserWriter Plus Printer
10.1.1	LPS$PERSISTENT_RESOURCES Not Supported
10.2	DIGITAL Colorwriter LSR 2000 Printer
10.2.1	NIC Does Not Work with Raw TCP/IP
10.3	DIGITAL DECcolorwriter 1000 Printer
10.3.1	Printer-Specific Setup Files
10.4	DIGITAL DEClaser 3500 Printer
10.4.1	Job Remains in Starting State
10.4.2	Interaction Between Communication Protocol and Native PCL Support
10.4.3	NIC Does Not Work with Raw TCP/IP
10.5	DIGITAL DEClaser 5100 Printer
10.5.1	Native PCL Is Unavailable with EtherTalk Protocol on NIC
10.5.2	NIC Does Not Work with Raw TCP/IP
10.5.3	Downloading and Deleting Fonts
10.5.4	Error Page Feature
10.6	DIGITAL Laser Printer LN15+
10.6.1	Raw TCP/IP Port Number
10.6.2	Printer Configuration Settings
10.7	DIGITAL Laser Printer LN17+ps
10.7.1	Job Remains in Starting State
10.7.2	Raw TCP/IP Port Number
10.7.3	Incorrect Sheet Count
10.7.4	Downloading and Deleting Fonts
10.7.5	Colored Separator Pages and Tray Switching
10.8	DIGITAL Laser Printer LN20 and LN40
10.8.1	Raw TCP/IP Port Number
10.8.2	Incorrect Sheet Count
10.9	DIGITAL Laser Printer LNC02
10.9.1	Minimum Firmware Version
10.9.2	Raw TCP/IP Port Number
10.9.3	Incorrect Sheet Count
10.10	DIGITAL PrintServer 17 Printer
10.10.1	Colored Separator Pages and Tray Switching
10.11	Hewlett-Packard LaserJet IIID Printer
10.11.1	Job Remains in Starting State
10.11.2	Incorrect Sheet Count on Duplex Jobs
10.12	Hewlett-Packard LaserJet IIISi Printer
10.12.1	Incorrect Sheet Count on Native PCL Jobs
10.12.2	Incorrect Sheet Count on Duplex Jobs
10.13	Hewlett-Packard LaserJet 4SiMX Printer
10.13.1	Incorrect Sheet Count on Duplex Jobs
10.14	Hewlett-Packard LaserJet 5M Printer
10.14.1	Problems Selecting an Input Tray
10.14.2	Incorrect Sheet Count on Duplex Jobs
10.15	Hewlett-Packard LaserJet 5SiMX Printer
10.15.1	Job Trailer Pages Print in Next Bin
10.15.2	Tray is Not Available due to Lack of Memory for Loaded Paper
10.15.3	Duplex Not Supported Due to Lack of Memory for Loaded Paper
10.15.4	Incorrect Sheet Count on Duplex Jobs
10.16	Hewlett-Packard XL300 Printer
10.16.1	Communication Problem
10.17	Lexmark Optra Rt+ Printer
10.17.1	Tray Linking and INPUT_TRAY