Document revision date: 19 July 1999
[Compaq] [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]
[OpenVMS documentation]

Guide to OpenVMS File Applications


Previous Contents Index

  1. The Main Editor Function menu displays the Edit/FDL utility commands.
  2. The INVOKE command displays the Script Title Selection menu. Note that HELP is the default command so if you want online help, just press the Return key.
  3. The Script Title Selection menu shows the seven scripts you can choose to help you design your file. There is no default so you must explicitly select one of the scripts.
  4. Choose the INDEXED script to design an indexed data file.
  5. Choose a disk cluster size of three.
  6. Define only one key---the primary key.
  7. This menu provides a selection of graphic display types.
  8. Select a line plot display.
  9. Select 100,000 records to be loaded initially.
  10. Select the CONVERT/FAST_LOAD method of loading records into the data file.
  11. Opt for no additional records after the initial load.
  12. Elect a fill level of 100 percent for the primary index buckets.
  13. Choose the variable-length record format.
  14. Select an average record size of 80 characters.
  15. Select an unlimited maximum record size.
  16. Select the string data type for the primary key.

    Note

    The string data-type keys include STRING, DSTRING, COLLATED and DCOLLATED keys.
  17. Opt to disallow segmentation in the primary key.
  18. Set the length of the primary key to 9 bytes.
  19. Define the initial position of the primary key at column 0.
  20. Opt to disallow duplicates of the primary key.
  21. Choose the Prolog 3 version.
  22. Select data key compression.
  23. Select data record compression.
  24. Select index compression.
  25. This is a line plot showing bucket size against index depth.
  26. Type "FD" to finish the design session.
  27. Enter the title of your FDL file specification.
  28. Enter the file specification of your data file.
  29. Select the CARRIAGE_RETURN carriage control.
  30. This display shows the tuning emphasis you chose to design your file. It also shows suggested bucket sizes for various index level depths and other tuning information.
  31. Select the default bucket size for the primary key.
  32. Enter the name of the primary key.
  33. Choose whether you want global buffers.
  34. This message shows the depth of the primary key index and gives the total number of levels.
  35. Press the Return key to display the main menu.
  36. This is the main menu.
  37. Use the EXIT command to exit the editor and to create the FDL file.
  38. This message shows the resulting FDL file specification and the number of lines it contains.

Note that the example uses most of the suggested defaults. There are three ways to accept defaults:

Key compression and index compression are not acceptable options when you select a collated key data type.

When the Edit/FDL utility creates an FDL file, it groups the attributes into major sections. The section headings are called primary attributes, and the attributes within a primary section are called secondary attributes. Certain secondary attributes contain a third level of attributes called qualifiers.

The objective of using the Edit/FDL utility is to create an FDL file with optimum values for the various attributes. An FDL file contains a list of the primary and secondary attributes with related qualifiers. If a primary or secondary attribute does not appear in the FDL file, it is assigned its default value.

Example 4-2 shows an FDL file. IDENT, SYSTEM, FILE, RECORD, AREA n, and KEY n are primary attributes; the others are secondary attributes.

Example 4-2 Sample FDL File

IDENT  
" 1-MAR-1993 14:07:46   OpenVMS FDL Editor" 
 
SYSTEM 
        SOURCE                  VMS 
FILE 
        GLOBAL_BUFFER_COUNT     0 
        NAME                    DISK$RMS:[RMSTEST]INDEXED.DAT;3 
        ORGANIZATION            indexed 
        OWNER                   [RMS1,TEST] 
        PROTECTION              (system:RWED, owner:RWED, group:RE, world:) 
 
RECORD 
        BLOCK_SPAN              yes 
        CARRIAGE_CONTROL        none 
        FORMAT                  variable 
        SIZE                    2048 
 
AREA 0 
        ALLOCATION              233 
        BEST_TRY_CONTIGUOUS     yes 
        BUCKET_SIZE             5 
        EXTENSION               60 
AREA 1 
        ALLOCATION              5 
        BEST_TRY_CONTIGUOUS     yes 
        BUCKET_SIZE             5 
        EXTENSION               5 
 
AREA 2 
        ALLOCATION              18 
        BEST_TRY_CONTIGUOUS     yes 
        BUCKET_SIZE             3 
        EXTENSION               6 
 
KEY 0 
        CHANGES                 no 
        DATA_AREA               0 
        DATA_FILL               100 
        DATA_KEY_COMPRESSION    no 
        DATA_RECORD_COMPRESSION no 
        DUPLICATES              no 
        INDEX_AREA              1 
        INDEX_COMPRESSION       no 
        INDEX_FILL              100 
        LEVEL1_INDEX_AREA       1 
        NAME                    "NUM"
        NULL_KEY                no 
        PROLOG                  3 
        SEG0_LENGTH             8 
        SEG0_POSITION           0 
        TYPE                    bin8 
 
KEY 1 
        CHANGES                 yes 
        DATA_AREA               2 
        DATA_FILL               100 
        DATA_KEY_COMPRESSION    yes 
        DUPLICATES              yes 
        INDEX_AREA              2 
        INDEX_COMPRESSION       yes 
        INDEX_FILL              100 
        LEVEL1_INDEX_AREA       2 
        NAME                    "NAME"
        NULL_KEY                yes 
        NULL_VALUE              0 
        SEG0_LENGTH             39 
        SEG0_POSITION           9 
        TYPE                    string 

4.1.2.2 Designing an FDL File

When you want to create an FDL file, you invoke the Edit/FDL utility with a DCL command in the following form:

EDIT/FDL/CREATE fdl-filespec 

The /CREATE qualifier specifies that you want to create an FDL file with the name entered in the fdl-filespec parameter. When the Edit/FDL utility displays the main menu, select the INVOKE command. In response to the INVOKE command, the Edit/FDL utility prompts you for a script. The only appropriate scripts for creating a file are INDEXED, RELATIVE, and SEQUENTIAL.

As discussed previously, you can enter a script directly by specifying the /SCRIPT qualifier on the DCL command line. For example, enter the following command to create an indexed FDL file:


$ EDIT/FDL/CREATE/SCRIPT=INDEXED MY_FDL_FILE

When you select the script, the Edit/FDL utility prompts you for information about the data file. Each prompt consists of a short question, a range of acceptable values (for example, 50-100) or the value type (for example, Keyword, YES/NO, and so forth) in parentheses, and the default answer in brackets. One of the questions in the INDEXED script is shown as follows:

Number of Keys to Define (1-255)[1]     : 

In this example, the Edit/FDL utility prompts you for the number of keys you want to define for an indexed data file. The Edit/FDL utility accepts any number from 1 to 255. If you do not specify a value, it assumes that you want to define one key only, the primary key. To accept the default value, press the Return key.

If the Edit/FDL utility requires that you enter a value (that is, no default value is specified for the response), it includes a dash within brackets [-].

When you specify the SEQUENTIAL script or the RELATIVE script, the Edit/FDL utility returns you to the main menu level after finishing the dialog. When you specify the INDEXED script, one of the prompts requests your choice of a design graphics display: a Line_Plot graph or a Surface_Plot graph. After finishing the dialog, the Edit/FDL utility displays the selected graph to help you make your final design choice.

The Line_Plot graph plots bucket size against index depth. All things equal, the size of the buckets determines the number of levels in the index, and the number of levels has a direct effect on the run-time performance of an indexed file. Fewer levels generally reduce the average number of keys searched when the index tree is traversed. However, fewer levels imply more records per data bucket and may cause longer data bucket search times. Thus, the Line_Plot graph helps you decide on the best bucket size for your application. Figure 4-1 shows a Line_Plot graph.

Figure 4-1 Line_Plot Graph


As shown in Figure 4-1, a bucket size of 1 block results in an index with five levels. Increasing the bucket size to 2 blocks reduces the number of index levels to four, but an increase to 5 blocks does not reduce the number of index levels at all. A bucket size of 7 blocks, however, reduces the number of index levels to three.

When you choose the bucket size, remember that the graphs do not display the data level. For example, if you want three levels in the file, then you must limit the number of index levels to two.

The Surface_Plot graphics mode lets you choose a range of values to see their effects. The Edit/FDL utility prompts you to enter a lower and upper bound for one of the following values:

The selected range is displayed along the graph's vertical axis.

The variable on the graph's horizontal axis is bucket size. The numbers in the field portion of the graph show the number of levels at each bucket size for each of the other values.

Figure 4-2 is a Surface_Plot graph that shows a range of values for initial fill factors ranging from 100% to 40%.

Figure 4-2 Surface_Plot Graph


The area on the graph within the slash marks represents combinations that RMS finds acceptable. In Figure 4-2, a fill factor of 70% and a bucket size of 10 blocks is the optimum combination. A fill factor of 70% and a bucket size of 15 blocks is a relatively poor combination because it falls outside of the slash boundaries.

If you are sure the information you supplied to the Edit/FDL utility is valid, the best values are those that lie along the left-hand boundary next to the slash marks. If you are not sure that your information is valid, you should choose a value that lies more to the right of the slash boundary.

When you complete the dialog and the Edit/FDL utility presents the graph, you can make changes to certain attributes of the proposed data file. The design is not complete until you specify "FD" for "Finish Design," at which point the Edit/FDL utility asks a few more questions. You then have the opportunity to return to the main menu to view the file attributes that the Edit/FDL utility has created.

Figure 4-3 shows the attributes that you can alter when the Edit/FDL utility displays the graph. Note that each attribute has a 2-letter mnemonic. To alter an attribute, you specify the corresponding mnemonic. To refresh the display, press the Return key. To begin the final design phase, enter "FD."

Figure 4-3 Design Mnemonics


During the final design phase, the Edit/FDL utility gives you an opportunity to supply values for such attributes as TITLE, an optional primary that allows you to label the FDL file. (Most of these questions are also applicable to designing sequential and relative files.) When you have answered the questions, the Edit/FDL utility assigns the values to the FDL attributes and returns you to the main menu level to display the resulting FDL file.

At the main menu, you can select the ADD command to assign values to any attribute the script omitted. Remember that if an attribute does not appear in the FDL file, it assumes the default value. (For a list of the default values for each attribute, see the OpenVMS Record Management Utilities Reference Manual.) To modify an attribute, use the MODIFY command, and to delete an attribute, use the DELETE command.

To create the displayed FDL file, select the EXIT command. To abort the session without creating an FDL file, select the QUIT command.

4.1.3 Using the FDL Routines

You can also define file-creation characteristics with the FDL utility routines. The FDL routines provide you with the functions of the File Definition Language, and they allow you to set file creation characteristics from within your application.

There are four FDL routines:
FDL$CREATE Creates a file from an FDL specification, and then closes the file. See Section 4.2.4 for more information.
FDL$GENERATE Produces an FDL specification by interpreting a set of control blocks. It then writes the FDL specification either to an FDL file or to a character string.
FDL$PARSE Parses an FDL specification, allocates control blocks, and then fills in the relevant fields.
FDL$RELEASE Deallocates the virtual memory used by the control blocks created by FDL$PARSE. You must use FDL$PARSE to fill in (to populate) the control blocks if you plan to release the memory with FDL$RELEASE later.

Because the FDL$GENERATE, FDL$PARSE, and FDL$RELEASE routines allow you to use the run-time, as well as the creation-time, features of RMS, you must call them from a language that can access the control block fields that specify the CONNECT options. This may be difficult from a high-level language.

Example 4-3 shows how to call the FDL$PARSE and FDL$GENERATE routines from a Pascal program.

Example 4-3 Using FDL Routines in a Pascal Program

[INHERIT ('SYS$LIBRARY:STARLET')] 
PROGRAM example2 (input,output,order_master); 
 
(* This program fills in its own FAB, RAB, and  *) 
(* XABs by calling FDL$PARSE and then generates *) 
(* an FDL specification by calling FDL$GENERATE.*) 
(* It requires an existing input FDL file       *) 
(* (TESTING.FDL) for FDL$PARSE to parse.        *) 
 
TYPE 
(*+                                             *) 
(* FDL CALL INTERFACE CONTROL FLAGS             *) 
(*-                                             *) 
        $BIT1 = [BIT(1),UNSAFE] BOOLEAN; 
 
        FDL2$TYPE = RECORD CASE INTEGER OF 
        1: (FDL$_FDLDEF_BITS : [BYTE(1)] RECORD END; 
            ); 
        2: (FDL$V_SIGNAL : [POS(0)] $BIT1; 
                (* Signal errors; don't return          *) 
            FDL$V_FDL_STRING : [POS(1)] $BIT1; 
                (* Main FDL spec is a char string       *) 
            FDL$V_DEFAULT_STRING : [POS(2)] $BIT1; 
                (* Default FDL spec is a char string    *) 
            FDL$V_FULL_OUTPUT : [POS(3)] $BIT1; 
                (* Produce a complete FDL spec          *) 
            ) 
        END; 
 
    mail_order =  RECORD 
                  order_num : [KEY(0)] INTEGER; 
                  name : PACKED ARRAY[1..20] OF CHAR; 
                  address : PACKED ARRAY[1..20] OF CHAR; 
                  city : PACKED ARRAY[1..19] OF CHAR; 
                  state : PACKED ARRAY[1..2] OF CHAR; 
                  zip_code : [KEY(1)] PACKED ARRAY[1..5] 
                       OF CHAR; 
                  item_num : [KEY(2)] INTEGER; 
                  shipping : REAL; 
                  END; 
    order_file  = [UNSAFE] FILE OF mail_order; 
    ptr_to_FAB  = ^FAB$TYPE; 
    ptr_to_RAB  = ^RAB$TYPE; 
    byte = 0..255; 
 
 
VAR 
    order_master : order_file; 
    flags        : FDL2$TYPE; 
    order_rec    : mail_order; 
    temp_FAB     : ptr_to_FAB; 
    temp_RAB     : ptr_to_RAB; 
    status       : integer; 
 
FUNCTION LIB$SIGNAL 
  (%REF cond_val: INTEGER; 
   %IMMED num: INTEGER := %immed 0; 
   %STDESCR s1: PACKED ARRAY[L1..U1: INTEGER] OF CHAR := %IMMED 0; 
   %STDESCR s2: PACKED ARRAY[L2..U2: INTEGER] OF CHAR := %IMMED 0): INTEGER; 
  EXTERN; 
 
FUNCTION FDL$PARSE 
    (%STDESCR FDL_FILE : PACKED ARRAY [L1..U1:INTEGER] 
         OF CHAR; 
    VAR FAB_PTR : PTR_TO_FAB; 
    VAR RAB_PTR : PTR_TO_RAB) : INTEGER; EXTERN; 
FUNCTION FDL$GENERATE 
    (%REF FLAGS : FDL2$TYPE; 
    FAB_PTR : PTR_TO_FAB; 
    RAB_PTR : PTR_TO_RAB; 
    %STDESCR FDL_FILE_DST : PACKED ARRAY [L1..U1:INTEGER] 
         OF CHAR) : INTEGER; 
    EXTERN; 
 
BEGIN 
 
    status := FDL$PARSE ('TESTING',TEMP_FAB,TEMP_RAB); 
 if not odd (status) then LIB$SIGNAL(status); 
    flags::byte := 0; 
    status := FDL$GENERATE (flags, 
                            temp_FAB, 
                            temp_RAB, 
                            'SYS$OUTPUT:'); 
 if not odd (status) then LIB$SIGNAL(status); 
 
END. 
 

For more information about FDL routines, see the OpenVMS Utility Routines Manual.

4.2 Creating a File

After you select the creation characteristics for your file, you use the selected characteristics to create the file. You can create the file using one of the following:

4.2.1 Using the Create Service

The Create service creates a new data file assigning it the attributes you specify in the FAB and any applicable XABs. Note that where there is a conflict, the XAB fields override the FAB fields.

When you use the Create service to create a file, the file remains open until you explicitly close it.

If you set the create-if (CIF) bit in the FOP (file-processing options) field of the FAB, you can open an existing file with the Create service. If the file you try to create has the same name as an existing file, the Create service opens the existing file instead of creating the new file.

The Create service allows you to set file-creation characteristics and to create the file directly from your application program.

For more information about the Create service, see the OpenVMS Record Management Services Reference Manual.

4.2.2 Using the Create/FDL Utility

Unlike the Create service, using FDL to create a file is a two-step process. You must first create the FDL file using the Edit/FDL utility and then use another RMS utility or your application program to create the data file.

One of the utilities you can use to create a file is the Create/FDL utility (CREATE/FDL). CREATE/FDL creates an empty data file from the specifications in an existing FDL file. This feature allows you to use the Edit/FDL utility to create standard FDL files that describe commonly needed data files and then to use CREATE/FDL to create the data files as they are needed.

For example, to create an empty data file called CUSTRECS.DAT from the specifications in an FDL file called INDEXED.FDL, enter the following DCL command:


$ CREATE/FDL=INDEXED.FDL CUSTRECS.DAT

4.2.3 Using the Convert Utility

Another RMS utility that creates an output data file from the specifications in an FDL file is the Convert utility (CONVERT). However, instead of being empty, the new output file generally contains data records from the input file unless the input file was also empty. Note that the Convert utility processes relative files by sequentially reading records from the input file, then writing them to the output file. As a result the relative record numbers (RRN) change when the input file contains deleted or unused records.

If you want to use CONVERT to change the characteristics of a particular file, you can use a DCL command of the following form:

CONVERT/FDL=fdl-file input-file output-file 

The CONVERT/FDL command creates a new file named by the output-file parameter and assigns the new file the characteristics specified in the FDL file.

For more information about populating data files with CONVERT, see Section 4.5.

4.2.4 Using the FDL$CREATE Routine

You can also create data files according to your specifications with the FDL$CREATE routine. FDL$CREATE is the FDL routine most likely to be called from a high-level language. It creates a file from an FDL specification and then closes the file.

The FDL$CREATE routine performs the same function as the Create/FDL utility, but it allows you to create data files from your application. However, it allows you to use only the creation-time features of RMS.

Example 4-4 shows how to call the FDL$CREATE routine from a Fortran program.

Example 4-4 Using the FDL$CREATE Routine in a Fortran Program

*       This program calls the FDL$CREATE routine.  It 
*       creates an indexed output file named NEW_MASTER.DAT 
*       from the specifications in the FDL file named 
*       INDEXED.FDL.  You can also supply a default file name 
*       and a result name (which receives the name of the created 
*       file).  The program also returns all statistics. 
* 
        IMPLICIT        INTEGER*4       (A - Z) 
        EXTERNAL        LIB$GET_LUN,    FDL$CREATE 
        CHARACTER       IN_FILE*11      /'INDEXED.FDL'/, 
        1               OUT_FILE*14     /'NEW_MASTER.DAT'/, 
        1               DEF_FILE*11     /'DEFAULT.FDL'/, 
        1               RES_FILE*50 
        INTEGER*2       FIDBLK(3)       /0,0,0/ 
        I = 1 
        STATUS = FDL$CREATE (IN_FILE,OUT_FILE, 
                 DEF_FILE,RES_FILE,FIDBLK,,) 
        IF (.NOT. STATUS) CALL LIB$STOP (%VAL(STATUS)) 
* 
        STATUS=LIB$GET_LUN(LOG_UNIT) 
        OPEN (UNIT=LOG_UNIT,FILE=RES_FILE,STATUS='OLD') 
        CLOSE (UNIT=LOG_UNIT, STATUS='KEEP') 
* 
        WRITE (6,1000) (RES_FILE) 
        WRITE (6,2000) (FIDBLK (I), I=1,3) 
* 
1000    FORMAT  (1X,'The result filename is: ',A50) 
* 
2000    FORMAT  (/1X,'FID-NUM: ',I5/, 
        1         1X,'FID-SEQ: ',I5/, 
        1         1X,'FID-RVN: ',I5) 
* 
        END 

Example 4-5 shows how to call the FDL$CREATE routine from a COBOL program.

Example 4-5 Using the FDL$CREATE Routine from a COBOL Program

*        FDLCR.COB 
* 
*        This program calls the FDL$CREATE routine.  It creates 
*        an indexed output file named NEW_MASTER.DAT from the 
*        specifications in the FDL file named INDEXED.DAT.  You 
*        can also supply a default file name and a result name 
*        (that receives the name of the created file).  The 
*        program also returns the FDL$CREATE statistics. 
* 
*        DATA NAMES: 
* 
*        OUT-REC    defines the output record 
*        STATVALUE  receives the status value from the routine 
*                   call 
*        NORMAL     receives the value from SS$_NORMAL 
*        FIDBLOCK   receives the FDL$CREATE statistics.  There 
*                   are three: 
*                   (1) file identification number (FID-NUM) 
*                   (2) file sequence number       (FID-SEQ) 
*                   (3) relative volume number     (RVN) 
*        RESNAME    receives the name of the file that is created 
*                   (the result file name) 
* 
IDENTIFICATION DIVISION. 
PROGRAM-ID. FDL-CREATE-EXAMPLE. 
 
ENVIRONMENT DIVISION. 
CONFIGURATION SECTION. 
SOURCE-COMPUTER. VAX 
OBJECT-COMPUTER. VAX 
INPUT-OUTPUT SECTION. 
FILE-CONTROL. 
        SELECT OUT-FILE ASSIGN TO 'NEWMASTER.DAT'. 
 
DATA DIVISION. 
FILE SECTION. 
FD      OUT-FILE 
        DATA RECORD IS OUT-REC. 
 
01      OUT-REC. 
        02      OUT-NUM     PIC X(4). 
        02      OUT-NAME    PIC X(20). 
        02      OUT-COLOR   PIC X(4). 
        02      OUT-WEIGHT  PIC X(4). 
        02      SUPL-NAME    PIC X(20). 
        02      FILLER      PIC X(28). 
WORKING-STORAGE SECTION. 
01      MORE-DATA-FLAGS     PIC XXX     VALUE 'YES'. 
        88      THERE-IS-DATA           VALUE 'YES'. 
        88      THERE-IS-NO-DATA        VALUE 'NO '. 
 
01      STATVALUE           PIC S9(9)   COMP. 
 
01      FIDBLOCK            USAGE IS COMP. 
        02      NUM         PIC S9(9)   VALUE 0. 
        02      SEQ         PIC S9(9)   VALUE 0. 
        02      RVN         PIC S9(9)   VALUE 0. 
 
01      RESNAME             PIC X(50). 
 
PROCEDURE DIVISION. 
MAIN. 
        PERFORM CREATE-FILE THRU DISPLAY-STATS. 
        STOP RUN. 
 
CREATE-FILE. 
        CALL 'FDL$CREATE' USING BY DESCRIPTOR 'INDEXED.FDL' 
                                BY DESCRIPTOR 'NEWMASTER.DAT' 
                                BY DESCRIPTOR 'DEFAULT.DAT' 
                                BY DESCRIPTOR RESNAME 
                                BY REFERENCE FIDBLOCK 
                                BY VALUE 0 
                                BY VALUE 0 
                                BY VALUE 0 
                                BY VALUE 0 
                                BY VALUE 0 
                          GIVING STATVALUE. 
 
        IF STATVALUE IS FAILURE 
        CALL 'LIB$STOP' USING BY VALUE STATVALUE. 
 
DISPLAY-STATS. 
        DISPLAY 'The result filename is: ',RESNAME CONVERSION. 
        DISPLAY 'FID number:             ',NUM CONVERSION. 
        DISPLAY 'FID sequence:           ',SEQ CONVERSION. 
        DISPLAY 'Volume number:          ',RVN CONVERSION. 


Previous Next Contents Index

  [Go to the documentation home page] [How to order documentation] [Help on this site] [How to contact us]  
  privacy and legal statement  
4506PRO_011.HTML