Previous | Contents | Index |
This appendix shows sample installation and configuration procedures
for a standalone License Server on an OpenVMS Cluster.
C.1 Sample Standalone License Server Installation Procedure
The following example shows a sample installation dialog for the standalone License Server.
$ PRODUCT INSTALL ADVANCEDSERVER [RETURN] The following product has been selected: CPQ AXPVMS ADVANCEDSERVER V7.3 Layered Product Do you want to continue? [YES] [RETURN] Configuration phase starting ... You will be asked to choose options, if any, for each selected product and for any products that may be installed to satisfy software dependency requirements. CPQ AXPVMS ADVANCEDSERVER V7.3: Advanced Server for OpenVMS Copyright 2000 Compaq Computer Corporation Advanced Server is sold by Compaq Computer Corporation Advanced Server requires PAK PWLMXXXCA07.03 for each client. This installation procedure requires that all the following conditions are satisfied: 1. This procedure is running on an Alpha processor. 2. The system is running OpenVMS 7.2 or later. 3. All required privileges are currently enabled. 4. No PATHWORKS or Advanced Server images are running on this node or anywhere in the cluster. 5. No files from a PATHWORKS (NetWare) kit are present on this system disk. 6. No files from any PATHWORKS or Advanced Server kit are in SYS$SPECIFIC on this system disk. This procedure checks if the conditions are satisfied. If they are satisfied, the procedure continues. If not, the procedure stops. Do you want to continue? [YES] [RETURN] Select one of the numbered options: 1. Install the complete Advanced Server [default] 2. Install only the License Server 3. Install only the external authentication images 4. Install both the License Server and the external authentication images Option: [1] 2 [RETURN] This node does not have to be rebooted before starting this product. For complete information about the reasons a reboot might be necessary and how to avoid unnecessary reboots, see the Installation and Configuration Guide. Select an option: 1. Delay reboot as long as possible on all nodes. [default] 2. Prevent PWRK$CONFIG configuration on any node using this system disk until after reboot. 3. Prevent PWRK$CONFIG configuration on all nodes until after reboot. 4. Prevent startup on any node using this system disk until after reboot. 5. Prevent startup on all nodes until after reboot. Option: [1] 1 [RETURN] * This product does not have any configuration options. Execution phase starting ... The following product will be installed to destination: CPQ AXPVMS ADVANCEDSERVER V7.3 DISK$AXP0721:[VMS$COMMON.] Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90% ...100% The following product has been installed: CPQ AXPVMS ADVANCEDSERVER V7.3 Layered Product %PCSI-I-IVPEXECUTE, executing test procedure for CPQ AXPVMS ADVANCEDSERVER V7.3 ... Copyright Compaq Computer Corporation 1998, 2000. Starting Installation Verification Procedure for Advanced Server V7.3 for OpenVMS %PWRK-I-NORMAL, IVP completed successfully %PCSI-I-IVPSUCCESS, test procedure completed successfully |
The following example shows a sample configuration dialog for the standalone License Server.
$ @SYS$UPDATE:PWRK$CONFIG Advanced Server V7.3 for OpenVMS Configuration Procedure The Advanced Server stores and accesses the following types of data files: o Configuration parameter files o License Server data files o Log files o Printer spool files o Virtual memory section files You can specify any existing OpenVMS disk device that has at least 5000 free blocks of disk space to store these data files. Note: The server frequently accesses the data files stored on the disk. If these files are stored on the system disk, it can degrade the performance of both the OpenVMS system and the server. Therefore, Compaq recommends that you specify a disk other than the system disk. Press RETURN to continue: [Return] If this OpenVMS Cluster has multiple system disks, make sure that all nodes on which you plan to run the Advanced Server: o Use the same disk device to store and access Advanced Server data files. o Share the same SYSUAF.DAT file. In each system disk's startup file, define a system logical name that points all nodes to the shared SYSUAF.DAT file. For example: $ define/system/exec sysuaf pencil$dka300:[sys0.sysexe]sysuaf.dat The startup file is called SYS$MANAGER:SYSTARTUP_VMS.COM Enter disk device name where the Advanced Server data files will be stored [SYS$SYSDEVICE:]: [RETURN] Creating Advanced Server directory tree on SYS$SYSDEVICE:... %CREATE-I-EXISTS, PWRK$COMMONROOT:[000000] already exists The License Server can serve client-based licenses for Advanced Server clients over DECnet, NetBEUI, and TCP/IP. The Advanced Server need not be running for the License Server to operate. Do you want to serve client-based licenses over DECnet [YES]: [Return] Do you want to serve client-based licenses over NetBEUI [NO]: Y [Return] Do you want to serve client-based licenses over TCP/IP [NO]: Y [Return] Do you want to start the Advanced Server License Server now [YES]: [Return] The License Server will use DECnet, NetBEUI, TCP/IP. Process NETBIOS created with identification 2960012B Process PWRK$NBDAEMON created with identification 2960012D Process PWRK$KNBDAEMON created with identification 2960012F Process PWRK$LICENSE_S created with identification 29600131 To automatically start the License Server at system startup, you should add the following line to the SYS$MANAGER:SYSTARTUP_VMS.COM file: $ @SYS$STARTUP:PWRK$LICENSE_STARTUP Note: Add this line below the lines that start all network transports (such as DECnet). $ |
The following example shows a sample installation dialog when you select to install the External Authentication software only. Note that you cannot use the configuration procedure PWRK$CONFIG after this installation. Attempts to do so result in the message shown.
$ PRODUCT INSTALL ADVANCED SERVER[Return] The following product has been selected: CPQ AXPVMS ADVANCEDSERVER V7.3 Layered Product [Installed] Do you want to continue? [YES] [Return] Configuration phase starting ... You will be asked to choose options, if any, for each selected product and for any products that may be installed to satisfy software dependency requirements. CPQ AXPVMS ADVANCEDSERVER V7.3: Advanced Server for OpenVMS Copyright 2000 Compaq Computer Corporation Advanced Server is sold by Compaq Computer Corporation Advanced Server requires PAK PWLMXXXCA07.03 for each client. This installation procedure requires that all the following conditions are satisfied: 1. This procedure is running on an Alpha processor. 2. The system is running OpenVMS 7.2 or later. 3. All required privileges are currently enabled. 4. No PATHWORKS or Advanced Server images are running on this node or anywhere in the cluster. 5. No files from a PATHWORKS (NetWare) kit are present on this system disk. 6. No files from any PATHWORKS or Advanced Server kit are in SYS$SPECIFIC on this system disk. This procedure checks if the conditions are satisfied. If they are satisfied, the procedure continues. If not, the procedure stops. Do you want to continue? [YES] [Return] Select one of the numbered options: 1. Install the complete Advanced Server [default] 2. Install only the License Server 3. Install only the external authentication images 4. Install both the License Server and the external authentication images Option: [1] 3 [Return] A PWRK$STREAMSOS_V*.EXE execlet from a previous kit is currently loaded in memory on this node. You must reboot this node before starting the product on this node. For complete information about the reasons a reboot might be necessary and how to avoid unnecessary reboots, see the Installation and Configuration Guide. Select an option: 1. Delay reboot as long as possible on all nodes. [default] 2. Prevent PWRK$CONFIG configuration on any node using this system disk until after reboot. 3. Prevent PWRK$CONFIG configuration on all nodes until after reboot. 4. Prevent startup on any node using this system disk until after reboot. 5. Prevent startup on all nodes until after reboot. Option: [1] 1 [Return] * This product does not have any configuration options. Execution phase starting ... The following product will be installed to destination: CPQ AXPVMS ADVANCEDSERVER V7.3 DISK$AXP0721:[VMS$COMMON.] Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90% ...100% The following product has been installed: CPQ AXPVMS ADVANCEDSERVER V7.3 Layered Product %PCSI-I-IVPEXECUTE, executing test procedure for CPQ AXPVMS ADVANCEDSERVER V7.3 ... Copyright Compaq Computer Corporation 1998, 2000. Starting Installation Verification Procedure for Advanced Server V7.3 for OpenVMS %PWRK-I-NORMAL, IVP completed successfully %PCSI-I-IVPSUCCESS, test procedure completed successfully $ $ @SYS$UPDATE:PWRK$CONFIG [Return] %DCL-E-OPENIN, error opening SYS$SYSROOT:[SYSUPD]PWRK$CONFIG.COM; as input -RMS-E-FNF, file not found |
This appendix includes the following sections:
Table E-1 describes the files created during the installation of the Advanced Server.
File | Description |
---|---|
DCPS$EXAMPLES: | |
PWRK$BORDER.LUP 5 | DECprint Supervisor printer layup for borders |
PWRK$NOBORDER.LUP 5 | DECprint Supervisor printer layup for no borders |
PWRK$REV_LANDSCAPE_BORDER.LUP 5 | DECprint Supervisor printer layup for borders with Windows |
PWRK$REV_LANDSCAPE_NOBORDER.LUP 5 | DECprint Supervisor printer layup for no borders with Windows |
SYS$HELP: | |
ASOVMS073.RELEASE_NOTES | Release notes for Advanced Server V7.3 for OpenVMS |
AS$HLP.HLB 1, 5 | Help file for Advanced Server System Dump Analyzer (SDA) (associated with AS$SDA.EXE and invoked within SDA with the AS HELP command) |
CS$HLP.HLB 1, 5 | Help file for common services System Dump Analyzer (SDA) (associated with CS$SDA.EXE and invoked within SDA with the CS HELP command) |
PCDISKHLP.HLB 5 | DOS File Maintenance utility help library |
PWRK$ADMIN_CFG.HLB | Configuration Manager help library |
PWRK$ADMIN_LIC.HLB 5 | License Manager help library |
PWRK$MANAGER.HLB | ADMINISTER commands help library |
PWRK$PWMONITOR.HLB 1, 5 | Help file for PWRK$PWMON, the host-based monitor utility (invoked within PWRK$PWMON with the PWMON HELP command) |
PWRK$SHOWINI.HLB 1 | Help file for PWRK$SHOWINI.EXE |
STREAMS$HLP.HLB 1, 5 | Help file for System Dump Analyzer (SDA) for streams (protocol layer) analysis (associated with STREAMS$SDA.EXE and invoked within SDA with the STREAMS HELP command) |
SYS$LIBRARY: | |
AS$SDA.EXE 1, 5 | System Dump Analyzer (SDA) extension for analyzing Advanced Server system and dumps |
CS$SDA.EXE 1, 5 | System Dump Analyzer (SDA) extension for analyzing common services dumps |
NETBIOSSHR.EXE 5 | NetBIOS for DECnet shareable image |
PCDISKSHR.EXE 5 | DOS File Maintenance utility shareable image |
PCSA_MAILSHR.EXE 5 | Mail notification shareable image |
PWRK$ACME_MODULE_ALPHA.EXE 4 | External authentication Alpha image |
PWRK$ACME_MODULE_VAX.EXE 4 | External authentication VAX image |
PWRK$CMTLIBSHR.EXE 1, 3, 5 | Configurator, Monitor, and Tuner shareable library (not usable with the latest version of the Advanced Server for OpenVMS; logging is now performed by PWRK$PWMON) |
PWRK$CMT_LM.EXE 1, 3 | Advanced Server interface to the Configurator, Monitor, and Tuner (not usable with the latest version of the Advanced Server for OpenVMS; logging is now performed by PWRK$PWMON) |
PWRK$CMTSHR.EXE 1, 3, 5 | Configurator, Monitor, and Tuner shareable image (not usable with the latest version of the Advanced Server for OpenVMS; logging is now performed by PWRK$PWMON) |
PWRK$CSSHR_V7.EXE | Common services shareable image |
PWRK$DEVCTL_DL1100.TLB 5 | DEClaser 1100 device control library |
PWRK$DEVCTL_DL2100.TLB 5 | DEClaser 2100 device control library |
PWRK$DEVCTL_DL2100P.TLB 5 | DEClaser 2100P device control library |
PWRK$DEVCTL_DL2200.TLB 5 | DEClaser 2200 device control library |
PWRK$DEVCTL_DL2200P.TLB 5 | DEClaser 2200P device control library |
PWRK$DEVCTL_DL3200.TLB 5 | DEClaser 3200 device control library |
PWRK$DEVCTL_FX1050.TLB 5 | FX1050 device control library |
PWRK$DEVCTL_FX850.TLB 5 | FX850 device control library |
PWRK$DEVCTL_GENERIC.TLB 5 | Generic device control library |
PWRK$DEVCTL_HP_LASERJET.TLB 5 | HP LaserJet device control library |
PWRK$DEVCTL_LA50.TLB 5 | LA50 device control library |
PWRK$DEVCTL_LA51.TLB 5 | LA51 device control library |
PWRK$DEVCTL_LA70.TLB 5 | LA70 device control library |
PWRK$DEVCTL_LA75.TLB 5 | LA75 device control library |
PWRK$DEVCTL_LA75P.TLB 5 | LA75P device control library |
PWRK$DEVCTL_LA210.TLB 5 | LA210 device control library |
PWRK$DEVCTL_LA324.TLB 5 | LA324 device control library |
PWRK$DEVCTL_LG01.TLB 5 | LG01 device control library |
PWRK$DEVCTL_LG02.TLB 5 | LG02 device control library |
PWRK$DEVCTL_LG06.TLB 5 | LG06 device control library |
PWRK$DEVCTL_LG31.TLB 5 | LG31 device control library |
PWRK$DEVCTL_LJ250.TLB 5 | LJ250 device control library |
PWRK$DEVCTL_LN03.TLB 5 | LN03 device control library |
PWRK$DEVCTL_LN03P.TLB 5 | LN03 PLUS device control library |
PWRK$DEVCTL_LN03R.TLB 5 | LN03R device control library |
PWRK$DEVCTL_PROPRINTER.TLB 5 | Proprinter device control library |
PWRK$DEVCTL_SILENTWRITER.TLB 5 | SilentWriter device control library |
PWRK$FSLIB_ODS2.EXE 5 | ODS2/ODS5 addon library |
PWRK$LICENSE_LIBSHR.EXE 5 | License shareable library |
PWRK$LICENSE_MGMTSHR.EXE 5 | License management shareable image |
PWRK$LMAPISHR.EXE 5 | Advanced Server shareable image |
PWRK$LMRPCAPISHR.EXE 5 | Advanced Server shareable image |
PWRK$LMRPCSHR.EXE 5 | Advanced Server shareable image |
PWRK$LMRPCXNPSHR.EXE | Advanced Server shareable image |
PWRK$LMTASKSHR.EXE 5 | Advanced Server shareable image |
PWRK$MGTLIBSHR.EXE 5 | Advanced Server shareable image |
PWRK$MSV1_0_ACMESHR.EXE 4 | External authentication support library |
PWRK$NBLIB_DECNET.EXE | Advanced Server network interface to DECnet |
PWRK$NBLIB_NETBEUI.EXE | Advanced Server network interface to NetBEUI |
PWRK$NBLIB_TCPIP.EXE | Advanced Server network interface to TCP/IP |
PWRK$PCMSHR.EXE 5 | Cache manager shareable image |
PWRK$PRINTER_INFORMATION.DAT 5 | Printer information file |
PWRK$SDA.EXE 1, 5 | Extension for the System Dump Analyzer (SDA) for analyzing systems and dumps, for backward compatibility (replaced by AS$SDA.EXE, CS$SDA.EXE, and STREAMS$SDA.EXE) |
PWRK$SDA_V1.EXE 1, 5 | Original extension for the System Dump Analyzer |
PWRK$STREAMSSHR_V7.EXE 5 | Streams (protocol layer) shareable image |
PWRK$WHAT_TO_INSTALL.TXT | Text file used by the installation procedure to display menu of installation options |
PWRK$WINLIBSHR.EXE 5 | Advanced Server character-cell user interface shareable image |
PWRK$XTILIBSHR.EXE 5 | X/Open Transport Interface shareable library |
PWRK$XTINETBIOSSHR.EXE 5 | X/Open Transport Interface shareable image for NetBIOS |
PWRK$XTINSPNBSHR.EXE 5 | X/Open Transport Interface shareable image for DECnet |
STREAMS$SDA.EXE 1, 5 | System Dump Analyzer for analyzing streams (protocol layer) loadable images |
SYS$LOADABLE_IMAGES: | |
PCFSDRIVERDEF.STB 5 | Data structure definitions for PCFSDRIVER |
PWRK$STREAMSOS_V7.EXE 5 | Streams (protocol layer) system loadable image |
PWRK$STREAMSOS_V7.STB 5 |
Symbol table for
PWRK$STREAMSOS_V7.EXE (protocol layer) |
SYS$PCFSDRIVER_V7.EXE 5 | DECnet I/O and double mapping driver |
SYS$PCFSDRIVER_V7.STB 5 |
Symbol table for
SYS$PCFSDRIVER_V7.EXE |
SYS$PCIDRIVER_V7.EXE 5 | Cluster Interconnect I/O driver |
SYS$PCIDRIVER_V7.STB 5 |
Symbol table for
SYS$PCIDRIVER_V7.EXE |
SYS$MANAGER: | |
PWRK$DEFINE_COMMANDS.COM 1, 5 | Command procedure that defines symbols for commands that run Advanced Server utilities |
PWRK$SHOWSYS.COM 5 | Command procedure that shows status of file server processes |
SYS$MESSAGE: | |
PWRK$MSG.EXE 5 | Advanced Server for OpenVMS message file |
SYS$STARTUP: | |
PCSA$MAIL_STARTUP.COM 5 | PCSAMAIL command for TCP/IP clients invoking the PATHWORKS mail server |
PWRK$ACME_STARTUP.COM 4 | External authentication startup file |
PWRK$CHECK_PARAMS.COM 5 | Command procedure that checks system resources |
PWRK$COMMON_LOGICALS.COM 5 | Command procedure that defines common logicals |
PWRK$COMMON_SHUTDOWN.COM 5 | Common shutdown command procedure |
PWRK$COMMON_STARTUP.COM 5 | Common startup command procedure |
PWRK$GATHER_INFO.COM | Command procedure that gathers information into a save set for reporting problems |
PWRK$IS_REBOOT_NEEDED.COM | Command procedure called during installation that determines whether a reboot is needed |
PWRK$LICENSE_R_START.COM 5 | Startup for the License Registrar |
PWRK$LICENSE_S_START.COM 5 | Startup for the License Server |
PWRK$LICENSE_SHUTDOWN.COM 5 | License Server shutdown command procedure |
PWRK$LICENSE_STARTUP.COM 5 | License Server startup command procedure |
PWRK$LMBROWSER_START.COM | Browser startup file |
PWRK$LMMCP_START.COM | Command procedure that runs the Advanced Server controller |
PWRK$LMSRV_START.COM | Command procedure that runs the Advanced Server |
PWRK$LOGICALS.COM 5 | Command procedure that defines logical names |
PWRK$PCSA_SHUTDOWN.COM | PATHWORKS for VMS V4. x shutdown command procedure |
PWRK$SHUTDOWN.COM 5 | Shutdown command procedure |
PWRK$STARTUP.COM 5 | Startup command procedure |
SYS$I18n.LOCALES.SYSTEM | |
PWRK$ISO8859-1-EURO.LOCALE | Locale file for the ISO8859-1-EURO character set |
PWRK$ISO8859-1.LOCALE | Locale file for the ISO8859-1 character set (the default) |
PWRK$ISO8859-2.LOCALE | Locale file for the ISO8859-2 character set |
PWRK$ISO8859-5.LOCALE | Locale file for the ISO8859-5 character set |
PWRK$ISO8859-7.LOCALE | Locale file for the ISO8859-7 character set |
PWRK$ISO8859-8.LOCALE | Locale file for the ISO8859-8 character set |
PWRK$ISO8859-9.LOCALE | Locale file for the ISO8859-9 character set |
SYS$SYSTEM: | |
PWRK$FIXMEMSRV.EXE | Support image for member server role |
NETBIOS.EXE 5 | NetBIOS for DECnet |
PCDISK.EXE 5 | DOS File Maintenance utility |
PCSA$MAIL_SERVER.EXE 5 | PATHWORKS client mail server |
PCSA_CLAIM_NAME.EXE 5 | PCSA claim name utility |
PCX$SERVER.COM | Command procedure that starts the PC DECwindows X server |
PWRK$ACLADM.EXE | Server configuration tool |
PWRK$ADMIN.COM | Remote Net Admin command procedure |
PWRK$ADMIN_CFG.EXE | Configuration Manager utility |
PWRK$ADMIN_LIC.EXE 5 | License Manager utility |
PWRK$BANNER.EXE | Utility that collects system information and inserts it at top of log files |
PWRK$BLOBADM.EXE | Server configuration tool |
PWRK$CHACL.EXE | Server configuration tool |
PWRK$CHDOMAIN.EXE | Server configuration tool |
PWRK$CHGROUP.EXE 1 | Standalone utility that manages the Advanced Server groups database |
PWRK$CHUSER.EXE 1 | Standalone utility that manages the Advanced Server user accounts database |
PWRK$CNVTOHFS.EXE 5 | ODS-5 filename conversion utility |
PWRK$DELETEACE.EXE 5 | File ACE removal utility |
PWRK$FIXACE.EXE 5 | File ACE repair utility |
PWRK$ELFREAD.EXE | Event log file reader utility |
PWRK$EVTREPORT.EXE 5 | Event logger report generator |
PWRK$GETROLE.EXE | Server configuration tool |
PWRK$KNBDAEMON.EXE 5 | Kernel NETBIOS daemon process for TCP/IP |
PWRK$LICENSE_REGISTRAR.EXE 5 | License Registrar |
PWRK$LICENSE_SERVER.EXE 5 | License Server |
PWRK$LMBROWSER.EXE | Advanced Server browser image |
PWRK$LMECHO.EXE 1 | Debugging utility |
PWRK$LMMCP.EXE | Advanced Server controller |
PWRK$LMSHARE.EXE 1 | Standalone utility that manages the Advanced Server shares database |
PWRK$LMSRV.EXE | Advanced Server executable |
PWRK$LMSTAT.EXE 1 | Debugging utility |
PWRK$LOADSTREAMS_V7.EXE 5 | Loader for streams (protocol layer) system loadable image |
PWRK$LR_SHOW_USAGE.EXE 1, 5 | License count units utility |
PWRK$LSACL.EXE 1 | Debugging utility |
PWRK$MAKEMACH.EXE | Server configuration tool |
PWRK$MANAGER.EXE 5 | ADMIN utility |
PWRK$MAPUNAME.EXE 1 | Debugging utility |
PWRK$MASTER.EXE 1 | Master process and event logger |
PWRK$MODAL.EXE 1 | Standalone utility that manages the Advanced Server modals database |
PWRK$MONITOR.EXE 1, 3, 5 | PATHWORKS Monitor utility (not usable with the latest version of the Advanced Server for OpenVMS; replaced by PWRK$PWMON) |
PWRK$NBDAEMON.EXE 5 | NetBIOS daemon process for NetBEUI |
PWRK$NBSHOW.EXE 1, 5 | NetBEUI show status utility |
PWRK$NETEVENT.EXE 1 | Debugging utility |
PWRK$PWMON.EXE 1, 5 | Host-based monitor utility |
PWRK$REGUTL.EXE 5 | Registry parameter management utility |
PWRK$RMACL.EXE | Server configuration tool |
PWRK$SAMCHECK.EXE | Server configuration tool |
PWRK$SETSHO.EXE 5 | Set/Show Parameters utility |
PWRK$SHOWINI.EXE 1 | Utility that displays server configuration parameters |
PWRK$SHOWQUOTA.EXE 5 | Show Disk Quota utility |
PWRK$SRVCONFIG.EXE 1 | Debugging utility |
PWRK$START.EXE 5 | Utility that starts detached master process |
PWRK$START_PRINTERS.EXE | Utility that starts printer queues and printer destinations |
PWRK$STARTSVC.EXE 1 | Debugging utility |
PWRK$STOP.EXE 5 | Utility that stops server processes |
PWRK$VAPFADM.EXE | Server configuration tool |
PWRK$VERIFY.EXE 5 | Utility that verifies configuration parameters |
SYS$TEST: | |
PWRK$PCSI_IVP.COM | Installation Verification Procedure (IVP) |
PWRK$PCSI_IVP.DAT | Installation Verification Procedure data file |
SYS$UPDATE: | |
PWRK$COMMANDS.CLD 5 | Server command line definitions |
PWRK$COMMON.SAV 2, 5 | Backup saveset for the initial server directory tree |
PWRK$COMMON_CONFIG.COM 5 | Common configuration command procedure |
PWRK$CONFIG.COM 5 | One-time configuration command procedure |
PWRK$DEFINE_FORMS.COM 2, 5 | Command procedure that defines printer forms |
PWRK$DEINSTAL.COM | Advanced Server removal command procedure (if server is installed by PCSI, use the PRODUCT REMOVE command to deinstall server) |
PWRK$GETPARAM.COM 5 | Command procedure that gets a parameter from PWRK.INI |
PWRK$INSTALL_COMMANDS.COM 5 | Command procedure that installs Advanced Server DCL commands |
PWRK$LANMAN.SAV 2, 5 | BACKUP saveset for the initial Advanced Server directory tree |
PWRK$LICENSE_CONFIG.COM 5 | License Server configuration command procedure |
PWRK$LICENSE.SAV | PATHWORKS client licensing software BACKUP saveset |
PWRK$LMCONFIG.COM | Command procedure that sets up the initial Advanced Server directory tree |
PWRK$MIGRATE_INI.COM 5 | Command procedure that migrates LANMAN.INI parameters to the OpenVMS Registry |
PWRK$PCSI_CHECK_SYS$SPECIFIC.COM | Command procedure that detects whether SYS$SPECIFIC has any files or images that must be removed before installation |
PWRK$PCSI_CLEANUP_SYS$SPECIFIC.COM | Command procedure called by the installation and deinstallation procedures to remove old server images in SYS$SPECIFIC |
PWRK$PCSI_REMOVE_MASTER.COM | Deinstallation command procedure for removing Advanced Server files and images |
PWRK$PWUTIL.SAV 2 | BACKUP saveset for PATHWORKS client-based utilities |
PWRK$RESTORE_NETBIOS.COM | Command procedure that stores the NETBIOS image after the server is deinstalled |
PWRK$SETINI.COM 5 | Command procedure that updates server configuration parameters |
PWRK$SETPARAM.COM 5 | Command procedure that sets a parameter in PWRK.INI |
PWRK$VERSIONS.COM 5 | Command procedure that shows server image versions |
Previous | Next | Contents | Index |