Compaq ACMS for OpenVMS
Version 4.4 Installation Guide


Previous Contents Index

3.2.2 Product-Specific Questions (Second Phase)

This section discusses the questions and messages that apply specifically to the installation of ACMS Version 4.4. Depending on the kit and options that you choose, some of the steps listed here might not apply to your installation. This discussion assumes that you are installing the OpenVMS Alpha development kit (ACMSDEVA_044). See Appendix A for a sample installation of the ACMS OpenVMS Alpha development kit and of the ACMS OpenVMS VAX development kit.

Each question in the installation is marked with an asterisk (*) at the beginning of the line. Some questions show the default response in brackets, for example, [YES]. To choose the default response, press [Return].

  1. Selecting installation options
    The product-specific installation procedure begins execution. The following message is displayed:


    The results of this installation are being logged in
      SYS$COMMON:[SYSUPD]ACMS044_INSTALLATION.LOG
    Installing ACMS V4.4-0, development kit
    

    The procedure then asks what portions of the installation you want to perform. It lists the optional parts of the installation, and asks if you want to do the full installation. If you answer YES, the full installation is done; if you answer NO, you are asked individually whether you want to perform each optional part of the installation.
    In this example, the full installation is selected:


    There are five optional parts to the ACMS development kit installation:
        o  ACMS component software
        o  ACMS LSE update
        o  ACMS samples
        o  ACMS Request Interface samples
        o  ACMS WBEM related files
    The full installation includes all these parts.
    If ACMS component software is selected, the ACMS WBEM related files will
    also be copied.
    To install the ACMS samples or the ACMS Request Interface samples, you must
    install, or have previously installed, the ACMS component software.
    * Do you want the full ACMS installation [NO]?: Y
    

  2. Checking installation prerequisites
    The installation now checks that all ACMS installation prerequisites are met. These prerequisites are discussed in Chapter 2. The following message is displayed:


    CHECKING INSTALLATION PREREQUISITES
    -----------------------------------
    

    A message is also displayed for any prerequisites that are not met. For example, the following message indicates that the optional DECtrace software is not installed:


    The following software products are not available, or are below the minimum
    required version:
      Product               Required  Minimum version  Current version
      --------------------  --------  ---------------  ---------------
      LSE                   No        V4.3             V4.2-17
     
    If products marked as nonrequired are to be used with ACMS, they should be
    upgraded to at least the minimum version displayed before use.
    (required and optional software checked)
    (product licenses checked)
    (installed images checked)
    (privileges checked)
    (disk space checked)
    (disk quotas checked)
    (system parameters checked)
    (process account quotas checked)
    

    These messages are also logged in the following file:


    SYS$UPDATE:ACMS044_INSTALLATION.LOG
    

    If any of the prerequisites are not met (with the exception of those related to optional software), the installation is aborted and a message similar to the following is displayed:


    ////////////////////////////////////////////////////////////////////////
    Installation of ACMS is aborting because prerequisites are not met
      at 12:00 on 22-JUN-2001
    ////////////////////////////////////////////////////////////////////////
    

    At this point, address all the prerequisites that were not met, and then restart the installation of ACMS.

  3. Checking for previous ACMS installations
    The installation procedure checks to see if you have previously installed ACMS. If you have, some cleanup from the previous installation might be necessary; this is the case, for example, if you previously installed a development kit, and you are now installing a run-time kit.
    The following message shows that no cleanup is necessary:


    ACMS PREVIOUS INSTALLATION
    --------------------------
        (previous installation of ACMS is compatible with current installation)
    

    If cleanup is necessary, you are given the option to see a list of files that will be removed from the system disk during the installation.

  4. Reviewing the LSE informational message
    If you chose the LSE update option at the beginning of the installation, or if you chose the full installation, the installation advises you whether or not it can perform the LSE update. LSE cannot be updated if the optional LSE software is not present or if it is below the minimum version.
    The following message advises you that the LSE update will take place as requested:


    ACMS LSE CHECK
    --------------
        (LSE available -- LSE will be updated for ACMS)
    

    Later on you are asked if you want to continue the installation. If you were informed that LSE would not be updated, you can continue the installation, then install LSE and reinstall ACMS at your convenience, using the LSE update option; or you can stop the installation, install LSE, and then restart the complete ACMS installation.

  5. Reviewing the WBEM Files
    The installation advises you whether or not the files necessary for the Compaq Web-Based Enterprise Management (WBEM) environment are already present. The Remote Manager web agent software cannot be used if the appropriate WBEM software is not present or if it is below the minimum version.
    The following message advises you that the verification of the WBEM files will take place:


    ACMS WBEM CHECK
    -------------------
    

  6. Reviewing the Oracle Trace informational message
    The installation advises you whether or not it can perform the Oracle Trace update. Oracle Trace cannot be updated if the optional Oracle Trace software is not present or if it is below the minimum version.
    The following message advises you that the Oracle Trace update will take place:


    ACMS Oracle Trace CHECK
    -------------------
        (Oracle Trace available and will be updated for ACMS)
    

    Later on you are asked if you want to continue the installation. If you were informed that Oracle Trace would not be updated, you can continue the installation. If Oracle Trace is not available, the ACMS facility definition is stored in a text library specific to Oracle Trace, which is used to update the Oracle Trace facility database when Oracle Trace is installed. You do not have to reinstall ACMS after installing Oracle Trace.

  7. Reviewing the CDD informational message
    If you are installing a run-time kit, the installation advises you whether CDD is available. The availability of CDD affects the features provided by the run-time kit. See Section 1.4.2 for an explanation of these features.
    The following message advises you that CDD is available:


    ACMS CDD CHECK
    --------------
        (CDD available -- CDD-related files will be installed)
    

    Later on you are asked if you want to continue the installation. If you were informed that ACMS files related to CDD would not be installed, you can continue the installation, then install CDD and reinstall ACMS at your convenience, using the CDD related files option; or you can stop the installation, install CDD, and then restart the complete ACMS installation.

  8. Reviewing the old sample files informational message
    If you chose the ACMS samples option at the beginning of the installation, or if you chose the full installation, the installation checks for old samples from a previous installation. These samples are stored in SYS$COMMON:[SYSHLP.EXAMPLES.ACMS], and they are superseded by examples supplied with this kit. They are deleted automatically during the installation.
    The following message advises you that no old samples were found:


    ACMS OLD SAMPLE FILES
    ---------------------
        (no old sample files found)
    

    Later on you are asked if you want to continue the installation. If you want to preserve these old samples, stop the installation, rename the sample files to a different directory, and then reinstall ACMS.

  9. Reviewing the ACMS shutdown informational message
    If you chose the ACMS component software option at the beginning of the installation, or if you chose the full installation, the installation checks for the ACMS shutdown procedure:


    SYS$STARTUP:ACMSTOP.COM 
    

    If this procedure is found, the ACMS installation procedure executes it to ensure that previously installed ACMS software is not running during the installation. This shutdown occurs after you choose to continue the installation in a subsequent step.
    The following message advises you that ACMSTOP.COM was found:


    ACMS SHUTDOWN CHECK
    -------------------
        (ACMSTOP.COM found -- ACMS will be shut down during installation)
    

    Note

    If you have previously installed ACMS on this system, and if ACMSTOP.COM is not found, ensure that the ACMS system is shut down before continuing with the installation.
  10. Reviewing the postinstallation procedure informational message
    If you chose the ACMS component software at the beginning of the installation, or if you chose the full installation, the installation procedure advises you whether or not it can execute the postinstallation procedure automatically. The postinstallation procedure cannot be executed if you do not have the required privileges enabled.
    The following message advises you that the ACMS postinstallation procedure will be executed automatically:


    ACMS POSTINSTALLATION PROCEDURE
    -------------------------------
        (postinstallation procedure will be run automatically after installation)
    

    Note

    Refer to Chapter 4 for important information on other steps to take before using ACMS on your system.
  11. Reviewing the system roots check informational message
    The installation checks for ACMS files in system-specific roots. If you previously installed ACMS, certain files might exist in system-specific roots. With a few exceptions (for example, ACMSPAR.ACM) ACMS files should reside in cluster-common directories such as SYS$COMMON:[SYSLIB]. Some ACMS files might have migrated to system-specific roots as a result of maintenance or other activities performed on the previous version of ACMS. If ACMS files have migrated in this manner, and you then upgrade to a higher version of ACMS, you might subsequently encounter problems running ACMS across a cluster, such as problems related to a version mismatch or the inability to access new functionality on some nodes.
    The installation checks for ACMS files that might have migrated inadvertently to system-specific roots, and lists any files it finds. Compaq recommends that you check any files listed to ensure that they do not interfere with the proper operation of ACMS in the cluster. Table 3-1 lists the files that are checked.

    Table 3-1 ACMS-Related Files Checked For in System Roots
    Directory Files
    SYS$SYSTEM ACM*.EXE, ACM*.DAT, SYSUAF.DAT
    SYS$LIBRARY ACM*.EXE, ACM*.COM
    SYS$MANAGER ACM*.COM
    SYS$STARTUP ACM*.COM

    This example shows that no ACMS files were found in system-specific roots:


    ACMS SYSTEM ROOTS CHECK
    -----------------------
        (no ACMS-related files found in system-specific roots)
    

  12. Choosing to execute the IVP
    You are now asked whether you want to execute the ACMS Installation Verification Procedure (IVP). This question is asked if you are installing ACMS software (as opposed to installing samples or updating the LSE environment, for example).
    Compaq recommends that you run the IVP automatically after the installation, to ensure that the installation was successful. Chapter 5 contains more information on the IVP, including how to execute it manually at a later time.
    The following question is asked to determine whether you want to run the IVP automatically; press [Return] to accept the default answer, YES:


    ACMS IVP
    --------
    * Do you want to execute the Installation Verification Procedure [YES]?
    

    If you choose to execute the IVP, the installation now checks for the IVP user account ACMS$IVP. If the account ACMS$IVP does not exist, you are asked to supply a user identification code (UIC) and password for this account. The information you supply is used to create the account in the third phase of the installation.
    This example shows how to supply a UIC and password for the ACMS$IVP account:


    The ACMS$IVP account used to execute the IVP is not available.
      You must supply a UIC and password for this account so that it can be
      created; this must be done before the IVP can be executed.
      Please enter the UIC for the ACMS$IVP account, in the form [ggggg,nnnnnn]
    * UIC: [400,200]
      Please enter a password of at least 8 characters, using only
      the following characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789$_
    * Password:
    * Verification:
    

    Note

    The password and verification are not echoed when you type them.

    Refer to Section 2.9 for more information on selecting a valid UIC for the ACMS$IVP account.
  13. Choosing to continue the installation
    At this time, the installation procedure lists the steps to complete the installation, and an approximate time for the rest of the installation. It then asks if you want to continue. If issues remain that you must address before the installation continues, answer NO to stop the installation.
    The following example shows the work list for a typical development installation; the lists for run-time and remote-access installations are different.


    SUMMARY OF THIS ACMS INSTALLATION
    ---------------------------------
    The following steps will be taken to complete this installation:
    o  The ACMS system will be shut down (via SYS$STARTUP:ACMSTOP.COM)
    o  ACMS component software will be installed
    o  WBEM environment will be updated for ACMS
    o  LSE environment will be updated for ACMS
    o  Oracle Trace facility database will be updated for ACMS
    o  CDD-related ACMS files will be installed
    o  ACMS samples will be installed
    o  ACMS Request Interface samples will be installed
    o  The ACMS postinstallation procedure will be executed
    o  The ACMS IVP will be executed
    The rest of this installation will take approximately 7 minutes.
    Execution of the IVP will take approximately 2 minutes.
    Note that this time is heavily dependent your system load, hardware
    and kit media. The time mentioned was measured on a stand-alone DEC 3000
    (Alpha)  system with a disk-resident kit.  Your time may vary.
    * Do you want to continue the installation [YES]?
    

    Press [Return] to continue the installation.

3.2.3 Informational Messages (Third Phase)

In the third installation phase, the actual work of the installation takes place; restoring savesets, moving files, updating databases, and so on. This phase has no user interaction. At the beginning of the phase, a message similar to the following is displayed:


    Installation of ACMS started
      at 11:02 on 22-JUN-2001

Following this message, the installation procedure displays a number of informational messages that report on the progress of the installation.

If any errors are encountered in this phase, the installation aborts and a message similar to the following is displayed:


    ////////////////////////////////////////////////////////////////////////
    Installation of ACMS is aborting because errors were encountered
      at 13:25 on 22-JUN-2001
    ////////////////////////////////////////////////////////////////////////

If you receive this message, use information in previous error messages and the installation log to fix the problem, and then reinstall ACMS.

When the third phase is successfully completed, a message similar to the following is displayed:


    Installation of ACMS completed successfully
      at 11:07 on 22-JUN-2001
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

During the ACMS installation, VMSINSTAL operates in safety mode, which means that it defers file operations until the third phase has successfully completed. The VMSINSTAL-I-MOVEFILES message indicates that these deferred file operations are now being performed.

3.2.4 Running the Postinstallation Procedure (Fourth Phase)

If you were informed during the second phase of the installation that the ACMS postinstallation procedure would be executed, it is done at this time. A message similar to the following is displayed:


    ACMS postinstallation procedure started
      at 11:09 on 22-JUN-2001

The postinstallation procedure performs the following steps:

  1. Checking the ACMS$DIRECTORY logical name
    The procedure checks for the presence of the logical name ACMS$DIRECTORY. If this logical name is defined, it must be in /SYSTEM /SUPERVISOR mode, and it must point to an existing directory. If ACMS$DIRECTORY is not defined or is improperly defined, the procedure asks you for information so that it can define the logical name.
    The following message shows that ACMS$DIRECTORY is properly defined:


        ACMS$DIRECTORY is defined as MGR$:[ACMS.DIRECTORY]
        ACMS$DIRECTORY logical is acceptable
    

  2. Converting ACMSGEN parameter files
    The procedure asks if you want to convert existing ACMSGEN parameter files. If you answer YES, or press [Return] to accept the default answer, the procedure searches for all ACMSGEN parameter files located in SYS$SYSDEVICE:[SYS*.SYSEXE] and SYS$COMMON:[SYSEXE], and converts them to be compatible with ACMS Version 4.4.
    The following message shows the ACMSGEN convert question, and typical output from the conversion process:


    Do you want to convert existing ACMSGEN parameter files [Y]? 
        Converting SYS$SYSDEVICE:[SYSEXE]ACMSPAR.ACM
    The ACMSGEN parameter files listed above have been converted; if
    other parameter files exist on your system, they must be updated as
    follows:
            $ RUN SYS$SYSTEM:ACMSGEN
            ACMSGEN> USE file-specification
            ACMSGEN> WRITE file-specification
            ACMSGEN> EXIT
    

  3. Converting ACMS UDF and DDF files
    The procedure asks if you want to convert existing ACMS UDF and DDF parameter files. If you answer YES, or press [Return] to accept the default answer, the procedure searches for the files pointed to by the logical names ACMSUDF and ACMSDDF, if these logicals are defined, and then for ACMSUDF.DAT and ACMSDDF.DAT in SYS$SYSROOT:[SYS*], and converts them to be compatible with ACMS Version 4.4.
    The following message shows the ACMS UDF and DDF convert question, and typical output from the conversion process:


    Do you want to convert existing ACMS UDF and DDF files [Y]? 
        Converting UDF file SYS$COMMON:[SYSEXE]ACMSUDF.DAT
        Converting DDF file SYS$COMMON:[SYSEXE]ACMSDDF.DAT
    

  4. Checking for ACMS UDF and DDF files
    The procedure checks for the presence of ACMS DDF and UDF files. It first tries to locate these files through the /SYSTEM /EXECUTIVE logical names ACMSUDF and ACMSDDF, if they exist. The procedure then checks for ACMSUDF.DAT and ACMSDDF.DAT in SYS$COMMON:[SYSEXE]. If the files are not found in either manner, the procedure creates them.
    The following message shows that the logical names do not exist, but that the files were found in SYS$COMMON:[SYSEXE]:


        No /SYSTEM /EXECUTIVE logical ACMSUDF found
        SYS$COMMON:[SYSEXE]ACMSUDF exists
        No /SYSTEM /EXECUTIVE logical ACMSDDF found
        SYS$COMMON:[SYSEXE]ACMSDDF exists
    

  5. Checking for ACMS_SETUP.COM
    The procedure checks for the presence of ACMS_SETUP.COM in SYS$STARTUP. If the file does not exist, it is created. This is a template for site-specific commands related to the startup of ACMS. ACMS_SETUP.COM is executed by ACMSTART.COM, which is normally executed during system startup to start the ACMS software. Chapter 4 explains how to modify this template to address your specific needs regarding ACMS startup.
    If ACMS_SETUP.COM already exists, the ACMS_SETUP_NEW.COM template file is created. After the installation, review this template file to see if you need to add any new commands to your existing ACMS_SETUP.COM.
    The following message shows that the ACMS_SETUP.COM already exists, and that the template file ACMS_SETUP_NEW.COM is being created:


        SYS$COMMON:[SYS$STARTUP]ACMS_SETUP.COM already exists
        Creating SYS$COMMON:[SYS$STARTUP]ACMS_SETUP_NEW.COM
    Please review the contents of ACMS_SETUP_NEW.COM to determine whether there
    are any commands you should add to your existing ACMS_SETUP.COM.
    

  6. Checking for ACMS menu files
    The procedure checks in ACMS$DIRECTORY for the ACMS command menu ACMSCMD.MDB, and the default user menu ACMS.MDB, and copies them into that directory if they do not exist. The following message shows that the menu files already exist in ACMS$DIRECTORY:


        ACMS$DIRECTORY:ACMSCMD.MDB already exists -- not copied
        ACMS$DIRECTORY:ACMS.MDB already exists -- not copied
    

  7. Checking for ACMS$MGMT_SETUP files
    The procedure checks for ACMS$MGMT_SETUP and Remote Manager configuration files and asks if you want to set up and configure the Remote Manager.


    Do you want to SETUP and CONFIGURE the ACMS Remote System Manager [Y]?
        Creating SYS$STARTUP:ACMS$MGMT_SETUP.COM
    

    If you respond yes, the procedure asks you a series of questions concerning Remote Manager configuration. Refer to the Compaq ACMS for OpenVMS Remote Systems Management Guide for more information about Remote Manager setup.
    When the postinstallation procedure is completed, a message similar to the following is displayed:


        ACMS postinstallation procedure completed successfully
          at 11:10 on 22-JUN-2001
    

    Note

    See Chapter 4 for information on tasks that you perform manually after ACMS is installed on your system.


Previous Next Contents Index