Document revision date: 19 July 1999

1. With DECwindows, you can designate more than one global selection. The two most common global selections are the primary and secondary selections. A global selection can be owned by only one DECwindows application at a time.
   The GET_GLOBAL_SELECT built-in returns the data for the requested selection in the requested format. If the requested selection is not currently owned by any application, or if the owner cannot return it in the requested format, then GET_GLOBAL_SELECT returns TPU$K_UNSPECIFIED.
   If the selected information contains multiple records, the records are separated by the line-feed character (ASCII (10)).

Example A-4 shows one of the ways an application can get values for widget resources. The procedure is based on the EVE procedure eve$scroll_dispatch. The original version is in SYS$EXAMPLES:EVE$DECWINDOWS.TPU.

The procedure eve$scroll_dispatch is the callback routine that handles callbacks from scroll bar widgets. The portion of the procedure shown here determines where to position the editing point based on how you have changed the scroll bar slider. The procedure fetches the position of the slider with the built-in GET_INFO (widget_variable, "widget_info") and positions the editing point to the line in the buffer equivalent to the slider's position in the scroll bar. For more information about the resource names used with the scroll bar widget, see the VMS DECwindows Toolkit Routines Reference Manual.

EVE uses the following constants in this procedure:

• "increment"---The resource name for the amount that the scroll bar slider position is to be incremented or decremented when a scroll bar button is pressed.
• "pageIncrement"---The resource name for the amount that the scroll bar slider position is to be incremented or decremented when a click occurs within the scroll bar above or below the slider.
• "maximum"---The resource name for the maximum value of the scroll bar slider position.
• "minimum"---The resource name for the minimum value of the scroll bar slider position.
• "value"---The resource name for the top of the scroll bar slider position.
• "sliderSize"---The resource name for the size of the slider.
• 2---A constant for the callback reason code XmCR_VALUE_CHANGED. This reason code indicates that you changed the value of the scroll bar slider.
• "closure"---An index for the array returned by GET_INFO (WIDGET, "callback_parameters", array).
• "reason_code"---An index for the array returned by GET_INFO (WIDGET, "callback_parameters", array).
• "widget"---An index for the array returned by GET_INFO (WIDGET, "callback_parameters", array).

Example A-4 EVE Procedure That Handles Callbacks from a Scroll Bar Widget

PROCEDURE eve$scroll_dispatch LOCAL status, widget_called, widget_tag, widget_reason, scroll_bar_values, linenum, temp_array, . . .; ON_ERROR [TPU$_CONTROLC]: eve$learn_abort; ABORT; ENDON_ERROR (1)status := GET_INFO (WIDGET, "callback_parameters", temp_array); widget_called := temp_array {"widget; widget_tag := temp_array {"closure"}; widget_reason := temp_array {"reason_code"}; POSITION (eve$$scroll_bar_window {widget_called}); . . . scroll_bar_values := CREATE_ARRAY; scroll_bar_values {"increment"} := 0; scroll_bar_values {"pageIncrement"} := 0; scroll_bar_values {"maximum"} := 0; scroll_bar_values {"minimum"} := 0; scroll_bar_values {"value"} := 0; scroll_bar_values {"sliderSize"} := 0; (2)status := GET_INFO (widget_called, "widget_info", scroll_bar_values); ! The deleted statements scroll the window as dictated ! by the callback reason. . . . CASE widget_reason . . . [2]: IF (scroll_bar_values {"value"} = scroll_bar_values {"minimum"}) THEN POSITION (beginning_of (current_buffer)); ELSE (3) POSITION (scroll_bar_values {"value"}); ENDIF; . . . ENDCASE; ! . ! . ! . ENDPROCEDURE;

1. GET_INFO (WIDGET, "callback_parameters", array) returns an array that contains the values for the current callback. The array elements are indexed by the strings "widget", "closure", and "reason_code" that reference the widget that is calling back, the widget's closure value, and the reason code for the callback.
2. With GET_INFO (WIDGET, "widget_info", array), you can fetch information from a widget. The array parameter is indexed by the resource names associated with the specified widget. Resource names are case sensitive and the set of supported resources varies from one widget type to another. When you use GET_INFO (widget, "widget_info", array), DECTPU queries the widget for the requested information and puts the returned information in the array elements. Any previous values in the array are lost.
3. With POSITION (integer), you can move the editing point to the record specified by the parameter integer. DECTPU interprets this parameter as a record number.

Example A-5 shows one of the ways an application can use the SET (GLOBAL_SELECT) built-in. The procedure is based on the EVE procedure EVE$RESTORE_PRIMARY_SELECTION. The original version is in SYS$EXAMPLES:EVE$MOUSE.TPU.

The procedure eve$restore_primary_selection reactivates EVE's select range when you press the Ctrl/Shift/E4 key. The select range was deactivated when EVE lost the primary selection to another DECwindows application.

Example A-5 EVE Procedure That Reactivates a Select Range

PROCEDURE eve$restore_primary_selection LOCAL saved_position; ON_ERROR [TPU$_CONTROLC]: eve$$restore_position (saved_position); eve$learn_abort; ABORT; [OTHERWISE]: eve$$restore_position (saved_position); ENDON_ERROR; IF NOT eve$x_decwindows_active THEN RETURN (FALSE); ENDIF; saved_position := MARK (FREE_CURSOR); IF GET_INFO (eve$$x_save_select_array, "type") = ARRAY THEN CASE eve$$x_save_select_array {"type"} [RANGE]: eve$select_a_range (eve$$x_save_select_array {"start"}, eve$$x_save_select_array {"end"}); eve$$x_state_array {eve$$k_select_all_active} := eve$$x_save_select_array {"select_all"}; POSITION (eve$$x_save_select_array {"current"}); eve$start_pending_delete; [MARKER]: POSITION (eve$$x_save_select_array {"start"}); eve$x_select_position := select (eve$x_highlighting); POSITION (eve$$x_save_select_array {"end"}); eve$start_pending_delete; [OTHERWISE]: RETURN (FALSE); ENDCASE; eve$$restore_position (saved_position); eve$$found_post_filter; ! This is necessary if the ! cursor is outside the selection. eve$$x_save_select_array {"type"} := 0; UPDATE (current_window); SET (GLOBAL_SELECT, SCREEN, PRIMARY); ! This statement ! requests ownership of ! the primary global selection. RETURN (TRUE); ENDIF; RETURN (FALSE); ENDPROCEDURE;

A.6 Copying Selected Material from EVE to Another DECwindows Application

The procedure implements the operation of copying selected material from DECwindows EVE to another DECwindows application.

The procedure determines what property of the primary global selection is being requested, gets the value of the appropriate property by using a GET_INFO statement or an EVE procedure, and sends the information to the requesting application.

Example A-6 EVE Procedure That Implements COPY SELECTION

PROCEDURE eve$write_global_select ! EVE uses this procedure ! to respond to requests ! for information about ! selections. LOCAL saved_position, the_data, temp_array, total_lines, the_line, status, eob_flag, percent; ON_ERROR [OTHERWISE]: eve$$restore_position (saved_position); ENDON_ERROR; saved_position := MARK (FREE_CURSOR); IF NOT eve$x_decwindows_active THEN RETURN (FALSE); ENDIF; the_data := NONE; temp_array := GET_INFO (SCREEN, "event", GLOBAL_SELECT); ! Finds out which global selection and which property ! of the global selection are the subject of the ! information request. CASE temp_array {2} ! Determines the property requested by the other application. ["STRING", "TEXT"]: ! If one of these strings is requested, the ! procedure sends the text in the global ! selection to the requesting application. CASE temp_array {1} ! Checks which global selection was specified. [PRIMARY]: IF eve$x_select_position <> 0 THEN POSITION (GET_INFO (eve$x_select_position, "buffer")); IF GET_INFO (eve$x_select_position, "type") = RANGE THEN the_data := STR (eve$x_select_position); ELSE IF GET_INFO (eve$x_select_position, "type") = MARKER THEN the_data := STR (eve$select_a_range (eve$x_select_position, MARK (FREE_CURSOR))); ELSE the_data := NONE; ENDIF; ENDIF; eve$$restore_position (saved_position); ENDIF; [OTHERWISE]: the_data := NONE; ENDCASE; [OTHERWISE]: the_data := NONE; ! The procedure does not send data if ! the requesting application has asked ! for something other than the text, ! the file name, or the line number. ENDCASE; WRITE_GLOBAL_SELECT (the_data); ! This statement sends the ! requested information to ! the requesting application. ENDPROCEDURE;

This appendix presents the messages produced by DECTPU. Table B-1 lists the messages alphabetically by their abbreviations. The text of the message and its severity level appears with each abbreviation.

Table B-1 DECTPU Messages and Their Severity Levels

Abbreviation	Message	Severity Level
ACCVIO	access violation, reason mask='xx', virtual address='xxxxxxxx', PC='xxxxxxxx', PSL='xxxxxxxx'	FATAL
ADJSCROLLREG	scrolling parameters altered to top: 'top', bottom: 'bottom', amount: 'amount'	INFORMATIONAL
AMBIGSYMUSED	ambiguous symbol 'name' used as procedure parameter	INFORMATIONAL
ARGMISMATCH	parameter 'number's' data type, 'type', unsupported	ERROR
ASYNCACTIVE	journal file prohibited with asynchronous handlers declared	WARNING
ATLINE	at line 'integer'	INFORMATIONAL
ATPROCLINE	at line 'integer' of procedure 'name'	INFORMATIONAL
BACKUPERR	error making backup copy of 'file-spec'	ERROR
BADASSIGN	target of the assignment cannot be a function/keyword	ERROR
BADBUFWRITE	error occurred writing buffer 'buffer name'	WARNING
BADCASELIMIT	CASE constant outside CASE limits	ERROR
BADCASERANGE	invalid CASE range	ERROR
BADCHAR	unrecognized character in input	ERROR
BADDELETE	cannot modify constant integer, keyword, or string	ERROR
BADDISPVAL	display value = 'integer', must be between 'integer' and 'integer'	WARNING
BADEXITIF	EXITIF occurs outside a LOOP	ERROR
BADFIRSTLINE	first line = 'integer', must be between 'integer' and 'integer'	WARNING
BADHIERARCHY	invalid hierarchy identifier specified	ERROR
BADJOUCHAR	expected character in journal file	WARNING
BADJOUCOM	journaled command file was 'string', recovering with 'string'	ERROR
BADJOUCPOS	journaled starting character was 'integer', recovering with 'integer'	ERROR
BADJOUEDIT	journaled edit mode was 'string', recovering with 'string'	ERROR
BADJOUEIGHT	journaled eightbit was 'string', recovering with 'string'	ERROR
BADJOUFILE	operation terminated due to error in journal file access	ERROR
BADJOUINIT	journaled init file was 'string', recovering with 'string'	ERROR
BADJOUINPUT	journaled input file was 'string', recovering with 'string'	ERROR
BADJOUKEY	expected key in journal file	WARNING
BADJOULINE	journaled line editing was 'string', recovering with 'string'	ERROR
BADJOULPOS	journaled starting line was 'integer', recovering with 'integer'	ERROR
BADJOUPAGE	journaled page length was 'integer', recovering with 'integer'	ERROR
BADJOUSEC	journaled section file was 'string', recovering with 'string'	ERROR
BADJOUSTR	expected string in journal file	WARNING
BADJOUTERM	journaled terminal type was 'string', recovering with 'string'	ERROR
BADJOUWIDTH	journaled width was 'integer', recovering with 'integer'	ERROR
BADKEY	'keyword' is an invalid keyword	WARNING
BADLENGTHCHANGE	terminal will not support change of length	WARNING
BADLOGIC	internal logic error detected	FATAL
BADMARGINS	margins specified incorrectly	WARNING
BADPROCNAME	variable used as a procedure	ERROR
BADPROMPTLEN	prompt area length = 'integer', must be between 'integer' and 'integer'	WARNING
BADREFCNT	ref count: 'ccc', zap count: 'zzz', address: 'xxxxxxxx'	FATAL
BADREQUEST	request "'name'" of 'name' is not understood	WARNING
BADSCREENWIDTH	terminal must be wider than widest window, 'integer' columns	WARNING
BADSECTION	bad section file	ERROR
BADSTATUS	return status 'xxxxxxxx' different from last signal 'xxxxxxxx'	FATAL
BADSTRCNT	invalid string count found in journal file	WARNING
BADSYMTAB	bad symbol table	ERROR
BADUSERDESC	descriptor from user routine invalid or memory inaccessible	ERROR
BADVALUE	integer value 'integer' is outside specified limits	ERROR
BADWIDTHCHANGE	terminal will not support change of width	WARNING
BADWINDADJUST	attempt to make window less than 1 line long, no adjustment	WARNING
BADWINDLEN	window length = 'integer', must be between 'integer' and 'integer'	WARNING
BEGOFBUF	attempt to move past the beginning of buffer 'buffer name'	WARNING
BINARYOPER	operand combination 'type' 'oper' 'type' unsupported	WARNING
BITMAPREADERR	could not read bitmap file 'name'	ERROR
BOTLINETRUNC	calculated new last line 'integer', changed to 'integer'	INFORMATIONAL
BUILTININV	built-in is invalid at this time	ERROR
BUILTOBSOLETE	built-in no longer supported.	INFORMATIONAL
CALLUSERFAIL	CALL_USER routine failed with status %X'status'	WARNING
CANCELQUIT	QUIT canceled by request	WARNING
CANNOTUNSEL	cannot unselect item from unselect action routine	ERROR
CAPTIVE	unable to create a subprocess in a captive account	WARNING
CLIPBOARDFAIL	unexpected clipboard failure	WARNING
CLIPBOARDLOCKED	clipboard is locked by another process	WARNING
CLIPBOARDNODATA	clipboard does not contain the requested data	WARNING
CLIPBOARDZERO	clipboard data has 0 length	WARNING
CLOSEDIC	error closing the dictionary file	ERROR
CLOSEIN	error closing input file 'file-spec'	ERROR
CLOSEOUT	error closing output file 'file-spec'	ERROR
CNVERR	error occurred in the conversion routine	ERROR
COMPILED	compilation completed without errors	SUCCESS
COMPILEFAIL	compilation aborted	WARNING
CONSTRTOOLARGE	constant string too large	ERROR
CONTRADEF	contradictory definition for variable or constant 'name'	ERROR
CONTROLC	operation aborted by Ctrl/C	ERROR
CREATED	file 'file-spec' created	SUCCESS
CREATEFAIL	unable to activate subprocess	WARNING
DEBUG	breakpoint at line 'integer'	SUCCESS
DELETEFAIL	unable to terminate subprocess	WARNING
DICADD	'word' has been added to a dictionary as 'word'	SUCCESS
DICDEL	'word' has been removed from 'word' of a dictionary	SUCCESS
DICUPDERR	error updating dictionary file	ERROR
DIVBYZERO	divide by zero	ERROR
DUPBUFNAME	buffer 'name' already exists	WARNING
DUPKEYMAPLIST	attempt to define a duplicate key-map list 'key-map-list-name'	WARNING
DUPKEYMAP	attempt to define a duplicate key map 'key-map-name'	WARNING
EMPTYKMLIST	key-map list 'key-map-list-name' does not contain any key maps	WARNING
ENDOFBUF	attempt to move past the end of buffer 'buffer name'	WARNING
ERRSYMACTIVE	special error symbol already active	WARNING
EXECUTEFAIL	execution aborted	WARNING
EXITFAIL	attempt to EXIT was unsuccessful	WARNING
EXITING	editor exiting	SUCCESS
EXPCOMPLEX	expression too complex	ERROR
EXPECTED	one of the following symbols was expected:	INFORMATIONAL
EXTNOTFOUND	extension 'name' not found	ERROR
EXTRANEOUSARGS	one or more extraneous arguments specified	ERROR
FACTOOLONG	facility name, 'name', exceeds maximum length 'integer'	WARNING
FAILURE	internal DECTPU failure detected at PC 'number'	FATAL
FAILURE_STATUS	facility 'name' returned failure status of 'xxxxxxxx'	ERROR
FENCEPOST	no visible record found in specified range	WARNING
FILECONVERTED	file format is being converted to a supported type	ERROR
FILEIN	'count' line(s) read from file 'filename'	SUCCESS
FILEOUT	'count' line(s) written to file 'filename'	SUCCESS
FLAGTRUNC	value of message flags exceeds maximum value 15, truncated	WARNING
FREEMEM	memory deallocation failure	FATAL
FROMBUILTIN	called from built-in 'name'	INFORMATIONAL
FROMLINE	called from line 'integer'	INFORMATIONAL
FROMPROCLINE	called from line 'integer' of procedure 'name'	INFORMATIONAL
GBLSELOWNER	you are the global selection owner	WARNING
GETMEM	memory allocation failure (Insufficient virtual memory)	ERROR
HIDDEN	global variable 'name' by declaration	INFORMATIONAL
ICONNAMERDERR	could not read the application icon name	ERROR
IDMISMATCH	section NOT restored, section file must be rebuilt	FATAL
ILLCONDIT	illegal compilation conditional	ERROR
ILLEGALTYPE	illegal data type	ERROR
ILLPATAS	pattern assignment target only valid in procedure 'name'	ERROR
ILLREQUEST	request "'name'" is invalid	WARNING
ILLSEVERITY	illegal severity of 'value' specified, error severity used	WARNING
ILLSYSRECMODE	invalid default system record mode	ERROR
INBUILTIN	occurred in built-in 'name'	INFORMATIONAL
INCKWDCOM	inconsistent keyword combination	WARNING
INDEXTYPE	array index data type, 'type', unsupported	WARNING
INPUT_CANCELED	input request canceled	WARNING
INSVIRMEM	insufficient virtual memory	FATAL
INVACCESS	invalid file access specified	FATAL
INVBUFDELETE	cannot delete a permanent buffer	WARNING
INVCHARSET	unrecognized character set; using default character set DEC_MCS	WARNING
INVDEVTYPE	invalid device type	FATAL
INVFAOPARAM	FAO parameter 'integer' must be string or integer	WARNING
INVGBLSELDATA	the selected data cannot be processed	WARNING
INVINTERFACE	unrecognized interface	ERROR
INVIOCODE	invalid Operation Code passed to an I/O operation	ERROR
INVITEMCODE	invalid item code specified in list	FATAL
INVNUMSTR	invalid numeric string	WARNING
INVPARAM	parameter 'number''s data type, 'type', illegal; expected 'type'	ERROR
INVRANGE	invalid range enclosure specified	WARNING
INVTABSPEC	tabs specification incorrect, not changed	WARNING
INVTIME	invalid time interval	WARNING
INVWIDGETCLASS	the widget class cannot be defined	ERROR
JNLACTIVE	asynchronous actions prohibited when journal file open	WARNING
JNLNOTOPEN	journal file not open, recovery aborted	ERROR
JNLOPEN	journal file already open	ERROR
JOURNALBEG	journal of edit session started	INFORMATIONAL
JOURNALCLOSE	journal file successfully closed, journaling stopped	SUCCESS
JOURNALEOF	end of journal file found unexpectedly	WARNING
JRNLBUFBEG	journaling started for buffer 'buffer name'	INFORMATIONAL
JRNLNOTSAFE	buffer 'buffer name' is not safe for journaling	WARNING
JRNLOPENERR	error opening or locking journal file 'journal-file-spec'	ERROR
JRNLOPEN	journal file already open for buffer 'buffer name'	WARNING
KEYMAPNOTFND	key map 'key-map-name' not found in key-map list 'key-map-list-name'	WARNING
KEYSUPERSEDED	definition of key 'name' superseded	INFORMATIONAL
KEYWORDPARAM	keyword 'name' used as procedure/variable/constant	ERROR
LINENOTMOD	attempt to change unmodifiable line(s)	WARNING
LINETOOLONG	line is maximum length, cannot add text to it	WARNING
MAXMAPPEDBUF	a single buffer can be mapped to at most 'count' window(s)	WARNING
MAXVALUE	maximum value is 'integer'	WARNING
MINVALUE	minimum value is 'integer'	WARNING
MISSINGQUOTE	missing quote	ERROR
MISSYMTAB	missing symbol table	ERROR
MIXEDTYPES	operator with mixed or unsupported data types	ERROR
MODRANGEMARKS	MODIFY_RANGE requires either two marks or none	ERROR
MOUSEINV	mouse location information is invalid	WARNING
MOVETOCOPYTEXT	moving unmodifiable line(s) from buffer 'string' changed to copy	WARNING
MOVETOCOPY	move from unmodifiable buffer 'string' changed to copy	WARNING
MSGBUFSET	attempt to change modifiable setting of message buffer	WARNING
MSGNOTFND	message was not found; the default message has been returned	WARNING
MULTIDEF	parameter/local/constant 'name' multiply defined	ERROR
MULTIPLENAMES	there is more than one name matching, all are returned	WARNING
MULTISELECT	multiple identical CASE selectors	ERROR
MUSTBECONST	expression must be a compile-time constant	ERROR
MUSTBEONE	string must be 1 character long	WARNING
NEEDFILENAME	type file name for buffer 'name' (press RETURN to not write it):	SUCCESS
NEEDTOASSIGN	built-in must return a value	ERROR
NOASSIGNMENT	expression without assignment	ERROR
NOBREAKPOINT	no breakpoint is active	WARNING
NOCACHE	insufficient virtual memory to allocate a new cache	ERROR
NOCALLUSER	could not find a routine for CALL_USER to invoke	ERROR
NOCHARREAD	no character was read by the READ_CHAR built-in	WARNING
NOCLA	no conversion source has been specified yet	WARNING
NOCOPYBUF	cannot COPY a buffer to itself	WARNING
NOCURRENTBUF	no buffer has been selected as default	WARNING
NODEFINITION	key 'keyname' currently has no definition	WARNING
NODICENT	no entry found in a dictionary	WARNING
NODICUPD	the dictionary is restricting updating	WARNING
NODIC	no dictionary available in this editing session	WARNING
NOENDOFLINE	returning a range of text with no end of line	SUCCESS
NOEOBSTR	cannot return a string at end of buffer	WARNING
NOFILEACCESS	unable to access file 'name'	ERROR
NOFILEROUTINE	no routine specified to perform file I/O	FATAL
NOFOCUSOWNER	no input focus owner	WARNING
NOGBLSELDATA	no global selection data	WARNING
NOGBLSELOWNER	there is no global selection owner	WARNING
NOJOURNAL	editing session is not being journaled	WARNING
NOKEYMAPLIST	attempt to access an undefined key-map list 'key-map-list-name'	WARNING
NOKEYMAP	attempt to access an undefined key map 'key-map-name'	WARNING
NOLICENSE	DECTPU license validation failed	FATAL
NONAMES	there are no names matching the one requested	WARNING
NONANSICRT	SYS$INPUT must be supported CRT	ERROR
NOPARENT	there is no parent process to attach to	WARNING
NOPROCESS	no subprocess to interact with	WARNING
NOREDEFINE	built-in procedure 'name' cannot be redefined	ERROR
NORETURNVALUE	built-in does not return a value	ERROR
NOSELECT	no select active	WARNING
NOSHOWBUF	variable SHOW_BUFFER does not exist or is not a buffer	WARNING
NOTARRAY	indexed variable is not an array	WARNING
NOTDEFINABLE	that key is not definable	WARNING
NOTERRORKEYWORD	error handler selector is not an error keyword	ERROR
NOTIMPLEMENTED	built-in compiled by 'name' is not implemented by 'name'	ERROR
NOTJOURNAL	file 'file' is not a journal file	ERROR
NOTLEARNING	you have not begun a learn sequence	WARNING
NOTMODIFIABLE	attempt to change unmodifiable buffer 'string'	WARNING
NOTSAMEBUF	the markers are not in the same buffer	WARNING
NOTSUBCLASS	object is not a subclass of WindowObjClass	WARNING
NOTYET	not yet implemented	WARNING
NOWINDOW	attempt to position the cursor outside all of the mapped windows	WARNING
NO	NO	INFORMATIONAL
NULLSTRING	null string used	WARNING
OCCLUDED	built-in/keyword 'name' occluded by declaration	INFORMATIONAL
ONDELRECLIST	attempt to access a record on the deleted list	FATAL
ONELEARN	cannot start a learn sequence while one is active	WARNING
ONESELECT	select already active, maximum 1 per buffer	WARNING
ONOROFF	parameter 'number' must be ON, OFF, true, or false	ERROR
OPENDIC	error opening the dictionary file	ERROR
OPENIN	error opening 'input-file' as input	ERROR
OPENOUT	error opening 'output-file' as output	ERROR
OVERLAPRANGE	overlapping ranges, operation terminated	WARNING
PARSEFAIL	error parsing 'file-spec'	WARNING
PARSEOVER	parser stack overflow	ERROR
PREMATUREEOF	premature end-of-file detected	ERROR
PRESSRET	press RETURN to continue...	SUCCESS
PROCESSBEG	subprocess activated	SUCCESS
PROCESSEND	subprocess terminated	SUCCESS
PROCSUPERSEDED	definition of procedure 'name' superseded	INFORMATIONAL
QUITTING	editor quitting	SUCCESS
READABORTED	READ_CHAR, READ_KEY, or READ_LINE built-in was aborted	WARNING
READERR	error reading 'input-file-spec'	ERROR
READLINEHELP	DECTPU is executing the READ_LINE built-in function, enter text or cancel	INFORMATIONAL
REALLYQUIT	buffer modifications will not be saved, continue quitting (Y or N)?	SUCCESS
REALLYRECOVER	continue recovering (Y or N)?	SUCCESS
RECJNLOPEN	journal file open, recovery status unchanged	ERROR
RECOVERABORT	recovery aborted by journal file inconsistency, journal file closed	WARNING
RECOVERBEG	recovery started	SUCCESS
RECOVERBUFBEG	recovery started for buffer 'buffer name'	SUCCESS
RECOVERBUFEND	recovery complete for buffer 'buffer name'	SUCCESS
RECOVERBUFFILE1	can not recover from file 'file name'	SUCCESS
RECOVERBUFFILE2	type new specification for original input file:	SUCCESS
RECOVERBUFFILE3	type new specification for inserted file:	SUCCESS
RECOVERBUFFILE4	can not find inserted file 'file name'	SUCCESS
RECOVEREND	recovery complete	SUCCESS
RECOVERFAIL	recovery terminated abnormally, journal file inconsistency	ERROR
RECOVERQUIT	no file name specified, nothing recovered	WARNING
RECURLEARN	learn sequence replay halted due to recursion	WARNING
REFRESH_NEEDED	screen refresh needed	WARNING
REGWIDDUP	registration string already associated with a different widget	WARNING
REPLAYFAIL	an inconsistency has been discovered, halting execution	WARNING
REPLAYWARNING	an inconsistency has been discovered, continuing execution	WARNING
REQARGSMISSING	one or more required arguments missing	ERROR
REQUIRESDECW	feature requires the DECTPU DECwindows screen updater	ERROR
REQUIRESMOTIF	feature requires the DECTPU Motif screen updater	ERROR
REQUIRESTERM	feature requires a terminal	ERROR
REQUIRESULTRIX	feature not available on this operating system	ERROR
REQUIRESVMS	feature not available on this operating system	ERROR
RESTOREFAIL	error during RESTORE operation	ERROR
REVERSECASE	CASE limits were reversed	INFORMATIONAL
ROUND	FORWARD was rounded to the top	INFORMATIONAL
SAVEAMBIGSYM	saving ambiguous symbol 'name'	INFORMATIONAL
SAVEERROR	error during SAVE operation	ERROR
SAVEUNDEFPROC	saving undefined procedure 'name'	INFORMATIONAL
SCANADVANCE	*** Scanner advanced to "'name'" ***	ERROR
SEARCHFAIL	error searching for 'file-spec'	WARNING
SECTRESTORED	'count' procedure(s), 'count' variable(s), 'count' key(s) restored	INFORMATIONAL
SECTSAVED	'count' procedure(s), 'count' variable(s), 'count' key(s) saved	SUCCESS
SECTUNDEFPROC	saved 'count' undefined procedure(s), 'count' ambiguous symbol(s)	WARNING
SELRANGEZERO	select range has 0 length	WARNING
SENDFAIL	unable to send to subprocess	WARNING
SOURCELINE	at source line 'integer'	INFORMATIONAL
STACKOVER	stack overflow during compilation	ERROR
STATOOLONG	truncating status line to 'count' characters	INFORMATIONAL
STRNOTFOUND	string not found	WARNING
STRTOOLARGE	string greater than 65535 characters	ERROR
STRTOOLNG	string is too long for a conversion source	ERROR
SUCCESS	successful completion	SUCCESS
SYMDELETE	*** Error symbol deleted ***	ERROR
SYMINSERT	*** "'name'" inserted before error symbol ***	ERROR
SYMREPLACE	*** Error symbol replaced by "'name'" ***	ERROR
SYMTBLFUL	all symbol tables are full	ERROR
SYNTAXERROR	syntax error	ERROR
SYSERROR	system service error	ERROR
TEXT	'message'	INFORMATIONAL
TIMEOUT	built-in timed out	WARNING
TOOFEW	too few arguments	ERROR
TOOMANYPARAM	too many formal parameters/local variables	ERROR
TOOMANYRECS	too many records	ERROR
TOOMANY	too many arguments	ERROR
TOPLINETRUNC	calculated new first line 'integer', changed to 1	INFORMATIONAL
TRUNCATE	line truncated to 'count' characters	WARNING
TYPEREDEFINE	widget resource type 'name' has been redefined to data type 'name'	WARNING
UIDICONERR	could not read icon 'name' from UID file	ERROR
UIDOPENERR	could not open the specified UID file(s)	ERROR
UIDWIDGETERR	could not read widget 'name' from UID file	ERROR
UKNFACILITY	unknown facility code specified	WARNING
UNARYOPER	operand combination 'oper' 'type' unsupported	WARNING
UNDEFINEDPROC	undefined procedure call 'name'	ERROR
UNDWIDCLA	undefined widget class specified	WARNING
UNKCSCOMP	ignoring unknown compound string component	WARNING
UNKESCAPE	unknown escape sequence read	WARNING
UNKKEYWORD	an unknown keyword has been used as an argument	ERROR
UNKLEXICAL	unknown lexical element	ERROR
UNKOPCODE	unknown opcode 'value'	ERROR
UNKTYPE	unknown data type 'value'	ERROR
UNKWNDESC	unknown descriptor type	ERROR
UNLINKWORKERR	error unlinking work file	ERROR
UNREACHABLE	unreachable code	INFORMATIONAL
WIDMISMATCH	parameter 'number''s class, 'class', unsupported	ERROR
WINDNOTMAPPED	the window is not mapped to a buffer	WARNING
WINDNOTVIS	built-in cannot operate on an invisible window	WARNING
WORKFILEFAIL	error opening the work file	ERROR
WRITEERR	error writing 'output-file-spec'	ERROR
YES	YES	INFORMATIONAL

	privacy and legal statement
6020PRO_040.HTML