[OpenVMS documentation]
[Site home] [Send comments] [Help with this site] [How to order documentation] [OpenVMS site] [Compaq site]
Updated: 11 December 1998

OpenVMS Alpha System Analysis Tools Manual


Previous Contents Index

Chapter 5
5 SDA CLUE Extension Commands
     5.1     Overview of SDA CLUE Extensions
     5.2     Displaying Data Using SDA CLUE Commands
     5.3     Using SDA CLUE with Dump Off System Disk
     5.4     Listing of SDA CLUE Extension Commands
    Command 63     CLUE CALL_FRAME
    Command 64     CLUE CLEANUP
    Command 65     CLUE CONFIG
    Command 66     CLUE CRASH
    Command 67     CLUE ERRLOG
    Command 68     CLUE FRU
    Command 69     CLUE HISTORY
    Command 70     CLUE MCHK
    Command 71     CLUE MEMORY
    Command 72     CLUE PROCESS
    Command 73     CLUE REGISTER
    Command 74     CLUE SG
    Command 75     CLUE STACK
    Command 76     CLUE SYSTEM
    Command 77     CLUE VCC
    Command 78     CLUE XQP
Chapter 6
6 SDA Extension Routines
     6.1     Introduction
     6.2     General Description
     6.3     Detailed Description
         6.3.1         Compiling and Linking an SDA Extension
         6.3.2         Invoking an SDA Extension
         6.3.3         Contents of an SDA Extension
     6.4     Debugging an Extension
     6.5     Callable Routines Overview
     6.6     Callable Routines Specifics
    Command 79     SDA$ADD_SYMBOL
    Command 80     SDA$ALLOCATE
    Command 81     SDA$DBG_IMAGE_INFO
    Command 82     SDA$DEALLOCATE
    Command 83     SDA$DISPLAY_HELP
    Command 84     SDA$ENSURE
    Command 85     SDA$FORMAT
    Command 86     SDA$FORMAT_HEADING
    Command 87     SDA$GET_ADDRESS
    Command 88     SDA$GET_BLOCK_NAME
    Command 89     SDA$GET_BUGCHECK_MSG
    Command 90     SDA$GET_CURRENT_CPU
    Command 91     SDA$GET_CURRENT_PCB
    Command 92     SDA$GET_HEADER
    Command 93     SDA$GET_HW_NAME
    Command 94     SDA$GET_IMAGE_OFFSET
    Command 95     SDA$GET_INPUT
    Command 96     SDA$GET_LINE_COUNT
    Command 97     SDA$GETMEM
    Command 98     SDA$INSTRUCTION_DECODE
    Command 99     SDA$NEW_PAGE
    Command 100     SDA$PARSE_COMMAND
    Command 101     SDA$PRINT
    Command 102     SDA$READ_SYMFILE
    Command 103     SDA$REQMEM
    Command 104     SDA$SET_ADDRESS
    Command 105     SDA$SET_CPU
    Command 106     SDA$SET_HEADING_ROUTINE
    Command 107     SDA$SET_LINE_COUNT
    Command 108     SDA$SET_PROCESS
    Command 109     SDA$SKIP_LINES
    Command 110     SDA$SYMBOL_VALUE
    Command 111     SDA$SYMBOLIZE
    Command 112     SDA$TRYMEM
    Command 113     SDA$TYPE
    Command 114     SDA$VALIDATE_QUEUE
Part 2
Part 2 OpenVMS Alpha System Code Debugger & System Dump Debugger
Chapter 7
7 The OpenVMS Alpha System Code Debugger
     7.1     User-Interface Options
     7.2     Building a System Image to Be Debugged
     7.3     Setting Up the Target System for Connections
         7.3.1         Making Connections Between the Target Kernel and the System Code Debugger
         7.3.2         Interactions Between XDELTA and the Target Kernel/System Code Debugger
     7.4     Setting Up the Host System
     7.5     Starting the System Code Debugger
     7.6     Summary of System Code Debugger Commands
     7.7     Using System Dump Analyzer Commands
     7.8     System Code Debugger Network Information
     7.9     Troubleshooting Checklist
     7.10     Troubleshooting Network Failures
     7.11     Access to Symbols in OpenVMS Executive Images
         7.11.1         Overview of How the OpenVMS Debugger Maintains Symbols
         7.11.2         Overview of OpenVMS Executive Image Symbols
         7.11.3         Possible Problems You May Encounter
     7.12     Sample System Code Debugging Session
Chapter 8
8 The OpenVMS Alpha System Dump Debugger
     8.1     User-Interface Options
     8.2     Preparing a System Dump To Be Analyzed
     8.3     Setting Up the Test System
     8.4     Setting Up the Build System
     8.5     Starting the System Dump Debugger
     8.6     Summary of System Dump Debugger Commands
     8.7     Using System Dump Analyzer Commands
     8.8     Limitations of the System Dump Debugger
     8.9     Access to Symbols in OpenVMS Executive Images
     8.10     Sample System Dump Debugging Session
Part 3
Part 3 OpenVMS Watchpoint Utility
Chapter 9
9 The Watchpoint Utility
     9.1     Introduction
     9.2     Initializing the Watchpoint Facility
     9.3     Creating and Deleting Watchpoints
         9.3.1         Using the $QIO Interface
         9.3.2         Invoking WPDRIVER Entry Points from System Routines
     9.4     Data Structures
         9.4.1         Watchpoint Restore Entry (WPRE)
         9.4.2         Watchpoint Control Block (WPCB)
         9.4.3         Trace Table Entry (WPTTE)
     9.5     Analyzing Watchpoint Results
     9.6     Watchpoint Protection Overview
     9.7     Restrictions


Previous Next Contents Index

[Site home] [Send comments] [Help with this site] [How to order documentation] [OpenVMS site] [Compaq site]
[OpenVMS documentation]

Copyright © Compaq Computer Corporation 1998. All rights reserved.

Legal
6549PRO_CONTENTS_001.HTML