Document revision date: 30 March 2001

To create a disk file section, follow these steps:

1. Open or create the disk file containing the section.
2. Define which virtual blocks in the file constitute the section.
3. Define the characteristics of the section.

Before you can use a file as a section, you must open it using OpenVMS Record Management Services (RMS). The following example shows the OpenVMS RMS file access block ($FAB) and $OPEN macros used to open the file and the channel specification to the SYS$CRMPSC system service necessary for reading an existing file:

#include <rms.h> #include <rmsdef.h> #include <string.h> #include <secdef.h> struct FAB secfab; main() { unsigned short chan; unsigned int status, retadr[1], pagcnt=1, flags; char *fn = "SECTION.TST"; /* Initialize FAB fields */ secfab = cc$rms_fab; secfab.fab$l_fna = fn; secfab.fab$b_fns = strlen(fn); secfab.fab$l_fop = FAB$M_CIF; secfab.fab$b_rtv = -1; /* Create a file if none exists */ status = SYS$CREATE( &secfab, 0, 0 ); if ((status & 1) != 1) LIB$SIGNAL( status ); flags = SEC$M_EXPREG; chan = secfab.fab$l_stv; status = SYS$CRMPSC(0, &retadr, 0, 0, 0, 0, flags, chan, pagcnt, 0, 0, 0); if ((status & 1) != 1) LIB$SIGNAL( status ); }

In this example, the file options parameter (FOP) indicates that the file is to be opened for user I/O; this parameter is required so that OpenVMS RMS assigns the channel using the access mode of the caller. OpenVMS RMS returns the channel number on which the file is accessed; this channel number is specified as input to SYS$CRMPSC (chan argument). The same channel number can be used for multiple create and map section operations.

The option RTV=--1 tells the file system to keep all of the pointers to be mapped in memory at all times. If this option is omitted, SYS$CRMPSC requests the file system to expand the pointer areas, if necessary. Storage for these pointers is charged to the BYTLM quota, which means that opening a badly fragmented file can fail with an EXBYTLM failure status. Too many fragmented sections may cause the byte limit to be exceeded.

The file may be a new file that is to be created while it is in use as a section. In this case, use the $CREATE macro to open the file. If you are creating a new file, the file access block (FAB) for the file must specify an allocation quantity (ALQ parameter).

You can also use SYS$CREATE to open an existing file; if the file does not exist, it is created. The following example shows the required fields in the FAB for the conditional creation of a file:

GBLFAB: $FAB FNM=<GLOBAL.TST>, - ALQ=4, - FAC=PUT,- FOP=<UFO,CIF,CBT>, - SHR=<PUT,UPI> . . . $CREATE FAB=GBLFAB

When the $CREATE macro is invoked, it creates the file GLOBAL.TST if the file does not currently exist. The CBT (contiguous best try) option requests that, if possible, the file be contiguous. Although section files are not required to be contiguous, better performance can result if they are.

13.5.6.3 Defining the Section Extents

After the file is opened successfully, SYS$CRMPSC can create a section either from the entire file or from certain portions of it. The following arguments to SYS$CRMPSC define the extents of the file that constitute the section:

• pagcnt (page count). This argument is required. It indicates the number of virtual blocks that will be mapped. These blocks correspond to pages in the section.
• vbn (virtual block number). This argument is optional. It defines the number of the virtual block in the file that is the beginning of the section. If you do not specify this argument, the value 1 is passed (the first virtual block in the file is the beginning of the section). If you have specified physical page frame number (PFN) mapping, the vbn argument specifies the starting PFN. The system does not allow you to specify a virtual block number outside of the file.

The flags argument to SYS$CRMPSC defines the following section characteristics:

• Whether it is a private section or a global section. The default is to create a private section.
• How the pages of the section are to be treated when they are copied into physical memory or when a process refers to them. The pages in a section can be either or both of the following:
  • Read/write or read-only
  • Created as demand-zero pages or as copy-on-reference pages, depending on how the processes are going to use the section and whether the file contains any data (see Section 13.5.6.10)
• Whether the section is to be mapped to a disk file or to specific physical page frames (see Section 13.5.6.15).

Table 13-2 shows the flag bits that must be set for specific characteristics.

Table 13-2 Flag Bits to Set for Specific Section Characteristics on VAX Systems

	Section to Be Created
Correct Flag Combinations	Private	Global	PFN Private	PFN Global	Shared Memory
SEC$M_GBL	0	1	0	1	1
SEC$M_CRF	Optional	Optional	0	0	0
SEC$M_DZRO	Optional	Optional	0	0	Optional
SEC$M_WRT	Optional	Optional	Optional	Optional	Optional
SEC$M_PERM	Not used	Optional	Optional	1	1
SEC$M_SYSGBL	Not used	Optional	Not used	Optional	Optional
SEC$M_PFNMAP	0	0	1	1	0
SEC$M_EXPREG	Optional	Optional	Optional	Optional	Optional
SEC$M_PAGFIL	0	Optional	0	0	0

When you specify section characteristics, the following restrictions apply:

• Global sections cannot be both demand-zero and copy-on-reference.
• Demand-zero sections must be writable.
• Shared memory private sections are not allowed.

If the section is a global section, you must assign a character string name (gsdnam argument) to it so that other processes can identify it when they map it. The format of this character string name is explained in Section 13.5.6.6.

The flags argument specifies the following types of global sections:

• Group temporary (the default)
• Group permanent
• System temporary
• System permanent

Group global sections can be shared only by processes executing with the same group number. The name of a group global section is implicitly qualified by the group number of the process that created it. When other processes map it, their group numbers must match.

A temporary global section is automatically deleted when no processes are mapped to it, but a permanent global section remains in existence even when no processes are mapped to it. A permanent global section must be explicitly marked for deletion with the Delete Global Section (SYS$DGBLSC) system service.

You need the user privileges PRMGBL and SYSGBL to create permanent group global sections or system global sections (temporary or permanent), respectively.

A system global section is available to all processes in the system.

Optionally, a process creating a global section can specify a protection mask (prot argument), restricting all access or a type of access (read, write, execute, delete) to other processes.

13.5.6.6 Global Section Name

The gsdnam argument specifies a descriptor that points to a character string.

Translation of the gsdnam argument proceeds in the following manner:

1. The current name string is prefixed with GBL$ and the result is subject to logical name translation.
2. If the result is a logical name, step 1 is repeated until translation does not succeed or until the number of translations performed exceeds the number specified by the system parameter LNM$C_MAXDEPTH.
3. The GBL$ prefix is stripped from the current name string that could not be translated. This current string is the name of the global section.

For example, assume that you have made the following logical name assignment:

$ DEFINE GBL$GSDATA GSDATA_001

Your program contains the following statements:

#include <descrip.h> . . . $DESCRIPTOR(gsdnam,"GSDATA"); . . . status = sys$crmpsc(&gsdnam, ...);

The following logical name translation takes place:

1. GBL$ is prefixed to GDSDATA.
2. GBL$GSDATA is translated to GSDATA_001. (Further translation is not successful. When logical name translation fails, the string is passed to the service.)

There are three exceptions to the logical name translation method discussed in this section:

• If the name string starts with an underscore (_), the operating system strips the underscore and considers the resultant string to be the actual name (that is, further translation is not performed).
• If the name string is the result of a logical name translation, then the name string is checked to see whether it has the terminal attribute. If the name string is marked with the terminal attribute, the operating system considers the resultant string to be the actual name (that is, further translation is not performed).
• If the global section has a name in the format name_nnn, the operating system first strips the underscore and the digits (nnn), then translates the resultant name according to the sequence discussed in this section, and finally reappends the underscore and digits. The system uses this method in conjunction with known images and shared files installed by the system manager.

When you call SYS$CRMPSC to create or map a section, or both, you must provide the service with a range of virtual addresses (inadr argument) into which the section is to be mapped.

If you know specifically which pages the section should be mapped into, you provide these addresses in a 2-longword array. For example, to map a private section of 10 pages into virtual pages 10 through 19 of the program region, specify the input address array as follows:

unsigned int maprange[1]; maprange[0]= 0x1400; /* Address (hex) of page 10 */ maprange[1]= 0x2300; /* Address (hex) of page 19 */

You do not need to know the explicit addresses to provide an input address range. If you want the section mapped into the first available virtual address range in the program region (P0) or the control region (P1), you can specify the SEC$M_EXPREG flag bit in the flags argument. In this case, the addresses specified by the inadr argument control whether the service finds the first available space in P0 or P1. The value specified or defaulted for the pagcnt argument determines the number of pages mapped. The following example shows part of a program used to map a section at the current end of the program region:

unsigned int status, inadr[1], retadr[1], flags; inadr[0]= 0x200; /* Any program (P0) region address */ inadr[1]= 0x200; /* Any P0 address (can be same) */ . . . /* Address range returned in retadr */ flags = SEC$M_EXPREG; status = sys$crmpsc(&inadr, &retadr, flags, ...);

The addresses specified do not have to be currently in the virtual address space of the process. SYS$CRMPSC creates the required virtual address space during the mapping of the section. If you specify the retadr argument, the service returns the range of addresses actually mapped.

After a section is mapped successfully, the image can refer to the pages using one of the following:

• A base register or pointer and predefined symbolic offset names
• Labels defining offsets of an absolute program section or structure

The following example shows part of a program used to create and map a process section:

#include <rms.h> #include <rmsdef.h> #include <string.h> #include <secdef.h> struct FAB secfab; main() { unsigned short chan; unsigned int status, inadr[1], retadr[1], pagcnt=1, flags; char *fn = "SECTION.TST"; /* Initialize FAB fields */ secfab = cc$rms_fab; secfab.fab$b_fac = FAB$M_PUT; secfab.fab$b_shr = FAB$M_SHRGET || FAB$V_SHRPUT || FAB$V_UPI; secfab.fab$l_fna = fn; secfab.fab$b_fns = strlen(fn); secfab.fab$l_fop = FAB$V_CIF; secfab.fab$b_rtv = -1; /* Create a file if none exists */ status = SYS$CREATE( &secfab, 0, 0 ); if ((status & 1) != 1) LIB$SIGNAL( status ); inadr[0] = X1400; inadr[1] = X2300; flags = SEC$M_WRT; chan = secfab.fab$l_stv; status = SYS$CRMPSC(&inadr, &retadr, 0, 0, 0, 0, flags, chan, pagcnt, 0, 0, 0); if ((status & 1) != 1) LIB$SIGNAL( status ); }

Notes on Example

1. The OPEN macro opens the section file defined in the file access block SECFAB. (The FOP parameter to the $FAB macro must specify the UFO option.)
2. SYS$CRMPSC uses the addresses specified at MAPRANGE to specify an input range of addresses into which the section will be mapped. The pagcnt argument requests that only 4 pages of the file be mapped.
3. The flags argument requests that the pages in the section have read/write access. The symbolic flag definitions for this argument are defined in the $SECDEF macro. Note that the file access field (FAC parameter) in the FAB also indicates that the file is to be opened for writing.
4. When SYS$CRMPSC completes, the addresses of the 4 pages that were mapped are returned in the output address array at RETRANGE. The address of the beginning of the section is placed in general register 6, which serves as a pointer to the section.

A process that creates a global section can map that global section. Then other processes can map it by calling the Map Global Section (SYS$MGBLSC) system service.

When a process maps a global section, it must specify the global section name assigned to the section when it was created, whether it is a group or system global section, and whether it wants read-only or read/write access. The process may also specify the following:

• A version identification (ident argument), indicating the version number of the global section (when multiple versions exist) and whether more recent versions are acceptable to the process.
• A relative page number (relpag argument) that specifies the page number relative to the beginning of the section to begin mapping the section. In this way, processes can use only portions of a section. Additionally, a process can map a piece of a section into a particular address range and subsequently map a different piece of the section into the same virtual address range.

To specify that the global section being mapped is located in physical memory that is being shared by multiple processors, you can include the shared memory name in the gsdnam argument character string (see Section 13.5.6.6). A demand-zero global section in memory shared by multiple processors must be mapped when it is created.

Cooperating processes can issue a call to SYS$CRMPSC to create and map the same global section. The first process to call the service actually creates the global section; subsequent attempts to create and map the section result only in mapping the section for the caller. The successful return status code SS$_CREATED indicates that the section did not already exist when the SYS$CRMPSC system service was called. If the section did exist, the status code SS$_NORMAL is returned.

The example in Section 13.5.6.10 shows one process (ORION) creating a global section and a second process (CYGNUS) mapping the section.

13.5.6.9 Global Page-File Sections

Global page-file sections are used to store temporary data in a global section. A global page-file section is a section of virtual memory that is not mapped to a file. The section can be deleted when processes have finished with it. (Contrast this to demand-zero pages, where initialization is not necessary but the pages are saved in a file.) The system parameter GBLPAGFIL controls the total number of global page-file pages in the system.

To create a global page-file section, you must set the flag bits SEC$M_GBL and SEC$M_PAGFIL in the flags argument to the Create and Map Section (SYS$CRMPSC) system service. The channel (chan argument) must be 0.

You cannot specify the flag bit SEC$M_CRF with the flag bit SEC$M_PAGFIL.

13.5.6.10 Section Paging

The first time an image executing in a process refers to a page that was created during the mapping of a disk file section, the page is copied into physical memory. The address of the page in the virtual address space of a process is mapped to the physical page. During the execution of the image, normal paging can occur; however, pages in sections are not written into the page file when they are paged out, as is the normal case. Rather, if they have been modified, they are written back into the section file on disk. The next time a page fault occurs for the page, the page is brought back from the section file.

If the pages in a section were defined as demand-zero pages or copy-on-reference pages when the section was created, the pages are treated differently, as follows:

• If the call to SYS$CRMPSC requested that pages in the section be treated as demand-zero pages, these pages are initialized to zero when they are created in physical memory. If the file is either a new file being created as a section or a file being completely rewritten, demand-zero pages provide a convenient way of initializing the pages. The pages are paged back into the section file.
• When the virtual address space is deleted, all unreferenced pages are written back to the file as zeros. This causes the file to be initialized, no matter how few pages were modified.
• If the call to SYS$CRMPSC requested that pages in the section be copy-on-reference pages, each process that maps to the section receives its own copy of the section, on a page-by-page basis from the file, as it refers to them. These pages are never written back into the section file but are paged to the paging file as needed.

In the case of global sections, more than one process can be mapped to the same physical pages. If these pages need to be paged out or written back to the disk file defined as the section, these operations are done only when the pages are not in the working set of any process.

In the following example, process ORION creates a global section, and process CYGNUS maps to that section:

/* Process ORION */ #include <rms.h> #include <rmsdef.h> #include <string.h> #include <secdef.h> #include <descrip.h> struct FAB gblfab; main() { unsigned short chan; unsigned int status, flags, efn=65; char *fn = "SECTION.TST"; $DESCRIPTOR(name, "FLAG_CLUSTER"); /* Common event flag cluster name */ $DESCRIPTOR(gsdnam, "GLOBAL_SECTION"); /* Global section name */ (1)status = SYS$ASCEFC(efn, &name, 0); if ((status & 1) != 1) LIB$SIGNAL( status ); /* Initialize FAB fields */ gblfab = cc$rms_fab; gblfab.fab$l_alq = 4; gblfab.fab$b_fac = FAB$M_PUT; gblfab.fab$l_fnm = fn; gblfab.fab$l_fop = FAB$M_CIF | FABM$_CBT; . . . /* Create a file if none exists */ (2)status = SYS$CREATE( &gblfab, 0, 0 ); if ((status & 1) != 1) LIB$SIGNAL( status ); flags = SEC$M_GBL || SEC$M_WRT; status = SYS$CRMPSC(0, 0, 0, flags, &gsdnam, ...); if ((status & 1) != 1) LIB$SIGNAL( status ); status = SYS$SETEF(efn); if ((status & 1) != 1) LIB$SIGNAL( status ); . . . } /* Process CYGNUS */ unsigned int status, efn=65; $DESCRIPTOR(cluster,"FLAG_CLUSTER"); $DESCRIPTOR(section,"GLOBAL_SECTION"); . . . (3)status = SYS$ASCEFC(efn, &cluster, 0); if ((status & 1) != 1) LIB$SIGNAL( status ); status = SYS$WAITFR(efn); if ((status & 1) != 1) LIB$SIGNAL( status ); status = SYS$MGBLSC(&inadr, &retadr, 0, flags, &section, 0, 0); if ((status & 1) != 1) LIB$SIGNAL( status ); }

	privacy and legal statement
5841PRO_043.HTML