前へ | 次へ | 目次 |
インストレーション・ユーティリティだけでなく,すべての PRODUCT コマンドおよび修飾子に関するオンライン・ヘルプを利用することができます。具体的なコマンドに関するヘルプを呼び出すには, DCLプロンプトで HELPコマンドの後にそのコマンド名と製品名を入力してください。
PRODUCTコマンドおよび修飾子についての詳細は,次のドキュメントを参照してください。
製品のインストレーション中に PCSI ユーティリティが問い合わせる質問についての詳細は,『OpenVMS システム管理者マニュアル』を参照してください。問い合わせが表示された場合は,たとえば次のようにして応答します。
インストレーション・プロシージャを開始する前に,製品のリリース・ノートに目を通してください。『HP DECwindows Motif for OpenVMS リリース・ノート』のコピーを取り出すには, PCSIキットの場所 (デバイス名とディレクトリ) を示すように PCSI$SOURCEを定義します。続いて,DCLプロンプトで, PRODUCT EXTRACT RELEASE NOTES コマンドを入力し,続いて製品名である DWMOTIF を入力します。
次の例を参照してください。
$ DEFINE PCSI$SOURCE DKA400:[PCSI_ALPHA_DWMOTIF131] $ PRODUCT EXTRACT RELEASE_NOTES DWMOTIF |
ファイルに抽出したリリース・ノートを印刷することができます。リリース・ノートを抽出するために,製品をインストールする必要はありません。
『日本語 HP DECwindows Motif for OpenVMS リリース・ノート』は, DECwindows Motif CD-ROM のドキュメント・ディレクトリに HTMLとASCII (.txt)形式で収録されています。リリース・ノートその他の DECwindows Motif ドキュメントへのアクセス方法についての詳細は,『HP DECwindows Motif for OpenVMS リリース・ノート』を参照してください。
A.2.3 DECwindows Motif ソフトウェアのインストレーション
以降の各項で, POLYCENTERソフトウェア・インストレーション・ユーティリティを使用して DECwindows Motif ソフトウェアをインストールする手順について説明します。
アカウントのクォータ,ディスク・スペース,システム・パラメータについては, 付録 A.1 節 を参照してください。
A.2.3.1 インストレーションの開始
POLYCENTERソフトウェア・インストレーション(PCSI)ユーティリティを起動するには, DCLプロンプトに対して次のコマンドを入力します。
$ DEFINE PCSI$SOURCE device:[PCSI_ALPHA_DWMOTIF131] |
ここで,device はディストリビューション CD-ROMがマウントされているデバイスもしくはインストレーション・キットが置かれているデバイスの名前です。
次に,POLYCENTER ソフトウェア・インストレーション・ユーティリティを呼び出します。
$ PRODUCT INSTALL DWMOTIF |
この節で示されているヘルプ情報を参照したい場合は, /HELP 修飾子を指定してPRODUCT INSTALL コマンドを使用します。 いくつかのメッセージの継続行を除き,この章で示すすべての表示メッセージは,長い行でも紙面に収まるように左側に寄せています。このため実際に表示されるメッセージのインデントは,この章で示すものと異なる場合があります。 |
インストレーション・ダイアログでは,最初に PCSI がこれからインストールしようとしている製品名を表示します。インストレーションを継続するか問い合わせがあります。続いて,製品名,著作権情報,プロダクト・オーソライゼーション・キー(PAK)情報が表示されます。
The following product has been selected: DEC AXPVMS DWMOTIF V1.3-1 Layered Product Do you want to continue? [YES] Configuration phase starting ... You will be asked to choose options, if any, for each selected product and for any products that may be installed to satisfy software dependency requirements. DEC AXPVMS DWMOTIF V1.3-1 : DECwindows Motif Compaq DECwindows Motif for OpenVMS Alpha , V1.3-1 is based on Version 11 Release 6.6 of the X Window System (X11R6.6) and OSF/Motif Version 1.2.5. DECwindows Motif V1.3-1 provides both runtime and development support for the X Window System. Runtime and development support is provided for X11 Release 6.6 (X11R6.6) and OSF/Motif Version 1.2.5. For OSF/Motif Version 1.1.3, only runtime support is provided. Copyright 2003 Hewlett-Packard Development Company, L.P. Motif is a registered trademark and The Open Group is a trademark of The Open Group in the United States and/or other countries. Confidential computer software. Valid license from HP and/or its subsidiaries required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Hewlett-Packard Company This software product is sold by Hewlett-Packard Company This product uses the PAK: DW-MOTIF This software is furnished under the licensing provisions of Hewlett-Packard Company's Standard Terms and Conditions. For more in- formation about Compaq's licensing terms and policies, contact your local HP office. |
インストレーション・コマンド・プロシージャは,システム・パラメータに適切な値が割り当てられているか確認します ( 付録 A.1.7.3 項 および 付録 A.1.7.4 項 を参照)。システム値が十分であれば,インストレーションがそのまま進行します。値が十分でない場合,インストレーションは中止され, AUTOGEN を実行したあとに,インストレーションを再開するよう求められます。次のようなメッセージが画面に表示されます。
Checking values of system parameters... %DECW-W-BADVALUE, SYSGEN parameter GBLSECTIONS is 380, should be at least 600 %DECW-W-BADVALUE, Free GBLSECTIONS is 15, should be at least 260 %DECW-W-BADVALUE, SYSGEN parameter GBLPAGES is 120000, should be at least 150000 %DECW-W-BADVALUE, SYSGEN parameter NPAGEDYN is 1294336, should be at least 1998848 %DECW-W-BADVALUE, SYSGEN parameter CLISYMTBL is 265, should be at least 512 The installation procedure has determined that some system parameter values require modification to install the DECwindows Motif V1.3-1 for OpenVMS software. Please type the following command to run AUTOGEN and reboot your system before restarting the DECwindows installation. This will set the system parameters to appropriate values for running DECwindows Motif V1.3-1 . @SYS$UPDATE:AUTOGEN GETDATA REBOOT CHECK_FEEDBACK The DECwindows installation is being terminated. Please run AUTOGEN and restart the installation. %PCSI-E-S_OPFAIL, operation failed %PCSIUI-E-ABORT, operation terminated due to an unrecoverable error condition |
インストレーション中に, AUTOGENを実行してシステム値を訂正するよう求められた場合は,次のコマンドを入力します。
$ @SYS$UPDATE:AUTOGEN GETDATA REBOOT CHECK_FEEDBACK |
AUTOGENが実行され,次の例のようなログが生成されます。
%AUTOGEN-I-BEGIN, GETDATA phase is beginning. %AUTOGEN-I-NEWFILE, Previous contents of SYS$SYSTEM:CLU$PARAMS.DAT have been copied to SYS$SYSTEM:CLU$PARAMS.OLD. You may wish to purge SYS$SYSTEM:CLU$PARAMS.OLD. %AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:PARAMS.DAT has been created. You may wish to purge this file. %AUTOGEN-I-END, GETDATA phase has successfully completed. %AUTOGEN-I-BEGIN, GENPARAMS phase is beginning. %AUTOGEN-I-NEWFILE, A new version of SYS$MANAGER:VMSIMAGES.DAT has been created. You may wish to purge this file. %AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:SETPARAMS.DAT has been created. You may wish to purge this file. %AUTOGEN-I-END, GENPARAMS phase has successfully completed. %AUTOGEN-I-BEGIN, GENFILES phase is beginning. %AUTOGEN-I-REPORT, AUTOGEN has produced some informational messages which have been stored in the file SYS$SYSTEM:AGEN$PARAMS.REPORT. You may wish to review the information in that file. %AUTOGEN-I-END, GENFILES phase has successfully completed. %AUTOGEN-I-BEGIN, SETPARAMS phase is beginning. %AUTOGEN-I-SYSGEN, parameters modified %AUTOGEN-I-END, SETPARAMS phase has successfully completed. %AUTOGEN-I-BEGIN, REBOOT phase is beginning. The system is shutting down to allow the system to boot with the generated site-specific parameters and installed images. The system will automatically reboot after the shutdown and the upgrade will be complete. SHUTDOWN -- Perform an Orderly System Shutdown on node MYNODE |
インストレーションを再開することができます (
付録 A.2.3.1 項 を参照してください)。
A.2.3.2.3 プログラミング環境の保存
インストレーション中に, OSF/Motifリリース1.1.3プログラミング環境がシステムに存在するかどうかチェックされます。すでに存在する場合は次の情報が表示され, OSF/Motif リリース1.1.3プログラミング環境を保存するかどうか問い合わせがあります。
The DECwindows Motif programming environment was installed with a previous version of this kit. This environment is incompatible with the OSF/Motif Release 1.2 environment provided with DECwindows Motif Version 1.2-6. The XUI programming environment is also not included in DECwindows Motif Version 1.3. If you intend to continue developing programs for XUI or OSF/Motif Release 1.1.3, then save this environment. Please refer to the installation guide for more details and information on accessing these files in their new location. If you do not choose to save the XUI and OSF/Motif Release 1.1.3 programming environment, those files will be removed from the system disk. Save the OSF/Motif Release 1.1.3 and XUI programming environment? |
Yes と応答して Return キーを押すと, OSF/Motif リリース 1.1.3 および XUIプログラミング環境が保存されます。サブディレクトリ[.DECW$113] が作成され,プログラミング環境をサポートするファイルがこのサブディレクトリに移動されます。
No と応答して Return キーを押すと,ファイルは削除されます。
OSF/Motif リリース1.1.3プログラミング環境に関連するファイルへのアクセスについての詳細は,
付録 A.1.5 項 を参照してください。
A.2.3.2.4 省略時のインストレーション
次に,省略時のインストレーションを希望するかどうか問い合わせがあります。以前にDECwindows Motifをインストールしていないシステムの場合は,使用しているハードウェア・プラットフォームに該当するすべてのオプションが自動的にインストールされます。以前にDECwindows Motifをインストールしているシステムの場合は,以前のインストールで選択されたすべてのオプションが自動的にインストールされます。インストール済みバージョンに存在しないオプションについては, V1.3 では省略時の値が使用されます。
Do you want the defaults for all options? [YES] |
以降の部分は,No と応答した場合の手順について説明します。
A.2.3.2.5 LBX プロキシのインストレーション
次にサーバのインストレーションで, LBX (Low-Bandwidth X) プロキシ・オプションをインストールしたいかどうか尋ねるダイアログが表示されます。
The LBX proxy reduces the overall network bandwidth required for client-to-server communications. The LBX proxy can be installed as a standalone option or in conjunction with the DECwindows Motif client software. Install Low Bandwidth X (LBX) Support [YES] |
LBX の機能についての詳細は, 『HP DECwindows Motif for OpenVMS Alpha New Features』 を参照してください。
A.2.3.2.6 クライアント・ソフトウェアのインストレーションの選択
次に,クライアント・ソフトウェアをインストールするかどうか尋ねられます。
Install the DECwindows Motif V1.3-1 client software? [YES] |
インストールを行っているシステムあるいはその他のリモート・システムで, DECwindows の表示が必要なプログラムを実行する場合は Yes と答えます。
No と答えた場合は 付録 A.2.3.2.10 項 へ進みます。
Yes と答えた場合,省略時のクライアント・インストレーションを行うかどうか尋ねられます。
Do you want the defaults for all suboptions? [YES] |
Yes と答えると,以下のクライアント・インストレーションに対して省略時の設定が適用されます。 Yes と答えた場合は 付録 A.2.3.2.10 項 へ進みます。 No と答えた場合は 付録 A.2.3.2.7 項 へ進みます。
A.2.3.2.7 デスクトップの選択についての質問
インストレーションのこの段階で, New Desktop および従来の DECwindows デスクトップについての情報が表示されます。どちらかのデスクトップを選択してインストールするか,あるいは両方をインストールするか選択することができます。 New Desktopのインストールを選択した場合, New Desktopを省略時のデスクトップとして設定するかどうか尋ねてきます。
The New Desktop is a graphical user interface that is derived from the Common Desktop Environment (CDE). It offers the following features not available with the traditional DECwindows desktop: o Multiple workspaces for greater flexibility in managing windows on the screen. o An icon-based File Manager to make it easier to manipulate files from the graphical user interface. o Enhanced support for the drag-and-drop feature, which is fully supported in the new File Manager and Application Manager applications. o New Image Viewer and Icon Editor applications. Both the New Desktop and the DECwindows desktop provide the same underlying X and Motif libraries and the same DECterm, Bookreader, Mail, and Calendar applications. Install New Desktop [YES] The manual pages provide online help text for New Desktop functions. If installed they can be viewed using the man page viewer from the Application Manager. Install Manual (reference) pages for the New Desktop [YES] If the New Desktop is the default, the new login box will be used and the user has the option at login to use either the New or the traditional desktop. If the New Desktop is not the default, the traditional login box will be used and only the traditional desktop will be available. You can change the default desktop by editing the file [SYSMGR]DECW$DEFAULT_DESKTOP.COM and restarting DECwindows. Make the New Desktop the default desktop [YES] The traditional DECwindows Desktop is that provided since Version 1.2 of DECwindows. If both new and traditional desktops are installed the user can select which to run when logging in. Install traditional DECwindows Desktop [YES] |
インストレーション終了後にデスクトップの選択を変更する手順については, 付録 A.3.4 項 を参照してください。
A.2.3.2.8 プログラミング言語サポート・オプション
次に,どのプログラミング言語をインストールするか,プログラミング・サンプルをインストールするかどうか問い合わせがあります。
次のようなダイアログが表示されます。
Headers and related files to support programs in C that will use the DECwindows libraries. Programming Support for the C Language [YES] Include files to support programs in Pascal that will use the DECwindows libraries. Programming Support for the Pascal Language [YES] Include files to support programs in FORTRAN that will use the DECwindows libraries. Programming Support for the FORTRAN Language [YES] Headers and related files to support programs in C that will use the New Desktop widgets. Programming Support for the New Desktop [YES] Examples of programming to use the various libraries. Programming examples [YES] Do you want all the defaults for the subitems? [YES] no Sample sound files that can be used with DECsound. Sound example files [YES] Examples, in various programming languages, of using the DECwindows and standard widgets and libraries. Programming examples for DECwindows [YES] Examples, in C, of using the new widgets provided with the New Desktop. Programming examples for the New Desktop [YES] |
本バージョンでは,TIS (Translated Image Support) をインストールするように求めるプロンプトが表示されます。これは,VAX プログラムが DECwindows Motif for OpenVMS Alpha環境で動作できるようにするものです。 TIS サポートは,従来のDECwindows デスクトップ環境でのみ使用できます。
Translated Image Support Translated image support allows programs translated from the VAX enviroment to work in the Alpha environment with the DECwindows libraries. Translated image support is not available for the New Desktop. Translated Image Support [YES] |
ここで,言語バリアントのアップデートについての警告がダイアログに表示されます。必ず,DECwindows Motif Version 1.3-1 をインストールしてから,使用したいすべての言語についての DECwindows Motif Version 1.3-1 の言語バリアントをインストールするようにしてください。
If a Local Language Variant is installed, refer to the Installation Guide. If you have a language variant of DECwindows Motif installed then you must upgrade to the version for DECwindows Motif V1.3-1 after completing this installation and before rebooting the system. A failure to do so could prevent DECwindows from starting. If there is no local language variant upgrade available for DECwindows Motif V1.3-1 then you should remove the local language variant before installing DECwindows Motif V1.3-1 . Do you want to continue? [YES] |
前へ | 次へ | 目次 |